Vauxhall Agila B MK2 H08 2008-2014 Rear Windscreen Wiper Arm Blade 5 Door
Vauxhall Agila B MK2 H08 2008-2014 Rear Windscreen Wiper Arm Blade 5 Door
Vauxhall Agila B MK2 H08 2008-2014 Rear Windscreen Wiper Arm & Blade — 5 Door
No VIN and no readable manufacturer part number are visible in the supplied listing photographs. The fitment below is based on the photographed shape, the listing's eBay compatibility data and catalogue references for the Agila B body. For a definitive check, send the full 17-character VIN and a clear photo of your existing arm, blade and splined mounting base through eBay Messages before ordering.
Actual Item Photographs
The item shown in these photographs is the item supplied. Please inspect the shape, mounting eye, blade carrier and cosmetic condition carefully.
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
THEPARTPILOTWhere This Part Fits on the Vehicle
THEPARTPILOT REFERENCE
Rear-screen visibility and water removal
The arm attaches to the splined output shaft of the rear wiper motor and transfers the motor's sweep to the blade. Its spring pressure holds the rubber wiping element against the glass so rain, road spray and light dirt can be cleared from the rear screen.
What it controls: the arm does not electrically control the motor. It is the mechanical link between the powered spindle and the wiping blade.
Why location matters: front arms, Agila A/Mk1 arms and visually similar arms can have different lengths, sweep angles, splines, offsets or blade fittings.
Reference vehicle photo: Harvey Bold, Wikimedia Commons, CC BY 4.0. Image used without modification other than responsive display and an overlaid listing label.
THEPARTPILOT REFERENCE
Confirmed Listing Compatibility
The live eBay compatibility data identifies the Vauxhall Agila Mk II (B), chassis H08, 5-door hatchback across model years 2008, 2009, 2010, 2011, 2012, 2013 and 2014. Engine size does not alter the tailgate body, but the exact arm must still be compared by VIN, mounting base and photographs.
| Make / model | Body / chassis | Engine shown in compatibility data | Model years | Status |
|---|---|---|---|---|
| Vauxhall Agila B / Mk2 | 5-door hatchback, H08, front-wheel drive | 1.0 12V, K10B, 996cc, 48kW / 65hp | 2008-2014 | VIN + photo check advised |
| Vauxhall Agila B / Mk2 | 5-door hatchback, H08, front-wheel drive | 1.2 i 16V, K12B, 1242cc, 63kW / 86hp | 2008-2014 | VIN + photo check advised |
| Vauxhall Agila B / Mk2 | 5-door hatchback, H08, front-wheel drive | 1.2 i 16V, K12B, 1242cc, 69kW / 94hp | 2008-2014 | VIN + photo check advised |
| Vauxhall Agila B / Mk2 | 5-door hatchback, H08, front-wheel drive | 1.3 CDTi, D13A / Z13DTJ, 1248cc, 55kW / 75hp | 2008-2014 | VIN + photo check advised |
Registration-derived catalogues and eBay vehicle selectors can contain errors or broad year ranges. A 17-character VIN plus a photograph of the old part is the safest way to eliminate ambiguity.
Will Not Fit / Not Confirmed
✕Do not order for these applications
✕Vauxhall Agila A / Mk1 / H00, generally 2000-2007.
✕Vauxhall Viva, Corsa, Meriva or other Vauxhall models.
✕Front windscreen wiper positions.
✕Any vehicle with a different mounting-eye diameter, spline, arm curvature, blade length or park position.
?Similar vehicles are not automatically compatible
The Suzuki Splash shares a related vehicle platform and can look very similar, but this photographed item has no readable part number to prove a direct cross-fit. Suzuki Splash fitment is therefore not confirmed in this listing.
Do not purchase for another marque solely because the shape looks close. Supply the VIN and a clear comparison photograph first.
Part Identification & Catalogue References
References found for the Agila B rear-arm family
93193399
95507670
These numbers are provided only as cross-checking aids from catalogue and market data. The current item's eBay specifics state that the manufacturer number does not apply, and no number is readable in the supplied photographs. Do not treat either reference as stamped confirmation for this exact used item.
Best identification method
✓Decode the full 17-character VIN.
✓Compare the mounting-eye shape and splined boss.
✓Compare arm curvature, total reach and park angle.
✓Compare the blade carrier and any cap arrangement.
✓Use the actual listing photographs rather than relying only on item specifics.
Item Details & Condition
Symptoms of a Faulty Rear Wiper Arm
Poor screen clearing
Streaking, missed sections or weak contact pressure can occur when the arm spring is tired, the arm is distorted or the blade is worn.
Loose or incorrect sweep
An arm that slips, parks in the wrong position or moves unevenly may have a worn splined mounting bore or a loose fixing nut.
Visible damage
Cracking around the mounting eye, corrosion, a bent profile or a damaged blade carrier can prevent safe and effective wiping.
Why Choose a Used Vehicle-Maker-Specification Part?
Correct geometry matters
A properly matched used part was designed around the vehicle's rear glass curvature, motor spindle, park position, blade pressure and tailgate clearances. A low-cost copy with the wrong offset or spring tension can wipe poorly, foul the bodywork or loosen on the spindle.
Value and environmental benefit
Reusing a serviceable vehicle part can cost substantially less than buying new and keeps an existing component in circulation. Savings vary by part, condition and current market price, so compare like-for-like before purchase.
Fitting Guide
Typical tools required
- Masking tape or removable marker
- Protective gloves and cloth
- Small trim tool or suitable screwdriver
- Socket and ratchet sized to the existing nut
- Penetrating fluid if corrosion is present
- Purpose-made wiper-arm puller if seized
- Torque wrench
- Screenwash/water for final test
Estimated repair time
Approximately 15-30 minutes
A seized arm, corroded spindle, damaged spline or previous incorrect installation can increase the time significantly. Many garages also apply a minimum labour charge.
- Switch the ignition off and allow the rear wiper to return to its normal park position.
- Mark the blade's park position on the glass with masking tape before disturbing the old arm.
- Carefully remove the nut cover if fitted, protecting the surrounding trim and glass.
- Use the correctly sized socket to loosen and remove the spindle nut. Retain the nut and washer if they are to be reused.
- Rock the old arm gently on the spline. Use a wiper-arm puller if seized. Never lever directly against the rear glass.
- Clean the spindle splines and inspect them for rounding, corrosion or cracking.
- Position the replacement arm at the tape mark, seat it squarely and refit the washer/nut.
- Tighten to the vehicle manufacturer's workshop specification. No torque value is guessed in this listing.
- Wet the glass and test the sweep. Confirm the arm does not hit the glass edge, tailgate, spoiler or trim and that it returns to the correct park position.
Static Garage Labour Estimator
| Garage rate | 15 minutes / 0.25 hour | 30 minutes / 0.50 hour |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £70 per hour | £17.50 | £35.00 |
| £90 per hour | £22.50 | £45.00 |
| £110 per hour | £27.50 | £55.00 |
| £130 per hour | £32.50 | £65.00 |
Illustrative labour only. It excludes the part, consumables, diagnostic time, seized-component work, local taxes and any garage minimum charge. This is a static table because active content and JavaScript are not used in the description.
Workshop Fitting Service
THEPARTPILOT • ILLUSTRATIVEFitting available subject to availability
Contact us through eBay Messages before travelling so the vehicle, part, appointment time and estimated labour can be confirmed.
Collection appointments may be available seven days a week until 8pm, including bank holidays, strictly by prior appointment and confirmation.
For collection directions and arrival instructions, use eBay Messages after purchase. Please do not travel without a confirmed appointment.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery, Address, VAT & Returns
Delivery
UK delivery is available in accordance with the postage services shown on the listing. International delivery may be offered through eBay's managed international programme only where the destination appears as eligible at checkout. Destination availability, import charges and restrictions can change.
Checkout address
Please ensure the delivery address is complete and correct before payment. We cannot manually change an eBay checkout address after the order has been placed.
VAT margin scheme
Sold under the applicable second-hand goods VAT margin scheme/global accounting method. VAT is not itemised separately, and no reclaimable VAT amount is available on the item price.
Returns
Returns are handled under the listing's eBay return settings, eBay policy and applicable consumer law. Any permitted deduction must reflect the actual reduction in value caused by use, damage, missing parts or inadequate return packaging; no fixed restocking deduction is stated here.
Order the Correct Part First Time
ThePartPilot holds more than 25,000 parts in stock and on the shelf at any one time. Clear identification before dispatch helps avoid delay, unnecessary returns and repeat repair work.
Careful Storage, Packing & Dispatch
THEPARTPILOT • ILLUSTRATIVESupporting a local small business
Thank you for choosing ThePartPilot. Your order supports a local independent parts business, the people who identify and prepare each item, and a more circular approach to vehicle repair.
♻️ Reusing serviceable parts can reduce demand for new raw materials, manufacturing energy and avoidable waste. 🚗 Careful fitment checking also reduces unnecessary transport and returns. 📦 We aim to package each order securely for its journey.