Vauxhall Agila B Mk2 H08 2011-2014 1.0 K10B Rear Windscreen Wiper Arm 5 Door
Vauxhall Agila B Mk2 H08 2011-2014 1.0 K10B Rear Windscreen Wiper Arm 5 Door
Fitment check - read this first
Do not order from registration year alone. Match the generation, H08 chassis designation, engine, body style and the actual photographs. If anything differs, send your full VIN through eBay Messages before purchase so fitment can be checked.
Actual item - reference photographs
Vehicle reference and where the part fits
Where it is fitted
What the rear wiper arm does
The arm mounts on the rear tailgate wiper spindle and transfers the wiper motor's movement to the rear blade. Its geometry, spline interface and spring pressure keep the blade at the correct angle and pressure against the rear glass so the swept area is cleared consistently.
Current eBay compatibility table
| Make | Model | Year | Body / chassis | Engine | Status |
|---|---|---|---|---|---|
| Vauxhall | Agila | 2011 | Mk II (B) H08, 5-door hatch | 1.0i K10B, 996cc, 50kW / 68PS | CURRENT EBAY COMPATIBILITY ROW |
| Vauxhall | Agila | 2012 | Mk II (B) H08, 5-door hatch | 1.0i K10B, 996cc, 50kW / 68PS | CURRENT EBAY COMPATIBILITY ROW |
| Vauxhall | Agila | 2013 | Mk II (B) H08, 5-door hatch | 1.0i K10B, 996cc, 50kW / 68PS | CURRENT EBAY COMPATIBILITY ROW |
| Vauxhall | Agila | 2014 | Mk II (B) H08, 5-door hatch | 1.0i K10B, 996cc, 50kW / 68PS | CURRENT EBAY COMPATIBILITY ROW |
Do not assume compatibility with these vehicles
| Vehicle / variant | Listing status | Why |
|---|---|---|
| Vauxhall Agila B 2008-2010 | NOT CONFIRMED FOR THIS PHYSICAL ITEM | Broader catalog research exists, but the item itself has no readable factory number in the current photos. VIN/part-number verification required before claiming fitment. |
| Vauxhall Agila B 2015 | NOT CONFIRMED FOR THIS PHYSICAL ITEM | Same reason: do not expand the live compatibility table without VIN or a physically verified number. |
| Agila B 1.2 petrol / 1.3 CDTi | NOT CONFIRMED | The current eBay compatibility table identifies only the 1.0 K10B application; no broader physical-item fitment is claimed here. |
| Opel Agila B | NOT CONFIRMED IN THIS LISTING | Related model/catalog data is not enough to certify this exact used item without part-number or VIN confirmation. |
| Suzuki Splash / other Suzuki models | NOT CONFIRMED | Platform or visual similarity is not proof of interchange. Do not order unless exact cross-reference/VIN confirmation has been completed. |
| Vauxhall Agila A / Mk1 | DO NOT BUY ON THIS LISTING'S FITMENT CLAIM | Different generation from the confirmed Mk II (B) H08 application. |
Any vehicle outside the green current-table rows should be treated as unverified until checked against VIN and a manufacturer/catalog number physically confirmed on the part.
Part-number research - use with caution
Common symptoms of a worn or damaged rear wiper arm
Why choose a used manufacturer-specification part?
A correctly matched used original-manufacturer vehicle part can retain the intended mounting geometry, spindle interface, spring loading and blade position for the vehicle. Low-cost pattern copies can vary in moulding, spline fit, spring force and finish, so exact matching matters more than simply finding a part that looks similar.
Fitting guide
Suggested tools
- Small trim tool or flat-blade tool for the spindle-nut cap
- Ratchet and the correct socket for the retaining nut - verify the actual nut size before starting
- Torque wrench for final tightening to the vehicle manufacturer's specified torque
- Masking tape or removable marker to record the original parked blade position
- Penetrating fluid if the arm is corroded onto the spindle
- Optional wiper-arm puller if the taper/spline is seized
- Protective cloth to prevent accidental contact with the rear glass or paint
Basic procedure
- Park the rear wiper normally, switch the ignition off and make the vehicle safe.
- Mark the existing blade/arm parked position on the glass with removable tape.
- Lift or remove the protective cap over the rear-wiper retaining nut.
- Remove the retaining nut using the correctly sized socket.
- Work the arm carefully off the spindle. If seized, use an appropriate puller rather than levering hard against the glass.
- Clean the spindle interface and compare the replacement arm directly with the removed arm.
- Install the replacement at the recorded parked position and tighten the nut to the manufacturer-specified torque for the vehicle.
- Wet the rear glass and test the wipe/park operation before final use. Never test a dry blade aggressively on dirty glass.
If you are not confident with the work, use a competent technician. Fitting service may be available through ThePartPilot subject to availability; ask through eBay Messages before travelling.
Garage labour estimate - static calculator
Use the table below to estimate labour only. Formula: hourly labour rate x 0.25 to 0.50 hours. Diagnosis, parts, seized components, minimum labour charges and additional repairs are not included.
| Garage hourly rate | 15 minute estimate | 30 minute estimate |
|---|---|---|
| £60/hour | £15.00 | £30.00 |
| £80/hour | £20.00 | £40.00 |
| £100/hour | £25.00 | £50.00 |
| £120/hour | £30.00 | £60.00 |
| £150/hour | £37.50 | £75.00 |
No JavaScript, forms or active-content calculator is used in this listing.
Workshop and stock support
Condition, contents and ordering checks
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
International postage through eBay Global Shipping Programme
Where this item remains eligible for eBay's Global Shipping Programme, eBay currently lists the following destination countries. Final availability, postage, import charges and restrictions are determined by eBay at checkout and can vary by item/category and destination.
Non-EU: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA, Vietnam.
International buyers may be charged import VAT, duties or other charges by eBay according to the destination.
VAT, returns and buyer protection
Why buying used supports a circular parts economy
Buying a serviceable used vehicle part supports a local small business while keeping usable components in circulation for longer. Reuse can reduce unnecessary waste, packaging and demand for new replacement production. It is a practical way to repair a vehicle while giving an existing component a second working life.
Thank you for supporting ThePartPilot and independent automotive reuse. Our focus is simple: identify the correct part, show the real item clearly, explain where it fits, and help customers order correctly the first time.