VAUXHALL CORSA D VXR 1.6T RHD 2007 - 2014 07-14 BRAKE FLUID RESERVOIR 0204051244
VAUXHALL CORSA D VXR 1.6T RHD 2007 - 2014 07-14 BRAKE FLUID RESERVOIR 0204051244
BRAKE FLUID RESERVOIR ASSEMBLY
Correct Vehicle Generation
This listing is prepared for the Vauxhall Corsa D VXR. The donor evidence on the actual component is marked CORSA VXR 2014, which places it within the Corsa D generation rather than the later Corsa E VXR.
2014 Vauxhall Corsa VXR vehicle reference image. Calreyn88 / Wikimedia Commons / CC BY-SA 4.0. Vehicle shown for generation and body-style reference only.
Actual Part Number Evidence
The photographed reservoir carries the moulded identifier 0 204 051 244 and the material marking >PP<. The donor identification is visibly marked CORSA VXR 2014.
Part Details & Engineering References
Why Buy From THEPARTPILOT?
A correctly matched factory-engineered component preserves the manufacturer-intended mounting geometry, hydraulic connection layout, material specification and packaging space around the vehicle. That can make a properly identified recycled component a stronger value proposition than an unproven low-grade replacement.
On selected components, customers can save up to 70% compared with equivalent brand-new replacement pricing. Actual saving varies by component, availability and prevailing new-part price.
Verified Compatibility Guide
| Vehicle | Years | Engine | Drive | Requirement |
|---|---|---|---|---|
| Vauxhall Corsa D / S07 VXR | 2007 - 2014 07-14 |
1.6 Turbo 1598cc A16LER / B16LER / Z16LER |
FWD / RHD | Existing reservoir, number, pipe routing and bracket must match. |
| Corsa D VXR higher-output derivative | 2014 | A16LES where applicable | FWD / RHD | Purchase only after confirming your original assembly is an exact physical and numbered match. |
Will Not Fit / Important Exclusions
- Left-Hand Drive Corsa D applications: the LHD catalogue reservoir is referenced separately as 93189751.
- Corsa E VXR 2015-on applications unless an exact physical and numbered cross-match has independently been confirmed.
- Corsa F and later vehicle generations.
- Vehicles carrying a different reservoir number, different pipe routing, different outlet arrangement, different bracket or incompatible fluid-level connection.
- Any application where the buyer's original component cannot be positively matched to the high-resolution listing photographs.
What This Component Does
This polypropylene reservoir is positioned in the RHD engine bay around the brake master-cylinder / bulkhead area. Its purpose is to hold and supply the specified hydraulic brake fluid to the vehicle's braking hydraulic circuit.
Correct reservoir geometry, secure mounting, sealed connections and uncontaminated fluid are critical because the braking system relies on a dependable hydraulic supply.
Technical Fitment Reference
Professional Fitting Guidance
1 Confirm the moulded number 0 204 051 244, RHD pipe routing and bracket arrangement against your existing assembly.
2 Protect painted surfaces, wear suitable hand and eye protection, and work in a clean environment to prevent hydraulic-fluid contamination.
3 Remove or extract fluid using appropriate workshop equipment and safely contain it in accordance with local disposal requirements.
4 Identify and disconnect the applicable hoses, pipes and fluid-level connection without twisting or damaging adjoining components.
5 Remove the mounting hardware and compare both assemblies side by side, checking every port, hose, bracket and mounting point.
6 Install with suitable serviceable seals/grommets where required and tighten fasteners to the vehicle manufacturer's workshop specification.
7 Refill only with the brake-fluid specification prescribed for the vehicle in the applicable service information.
8 If the hydraulic circuit has been opened, bleed it using the correct vehicle-specific sequence and professional bleeding equipment.
9 Check fluid level, warning indication, pedal feel and every connection for leakage before the vehicle is approved for road use.
Typical Tools & Equipment
- Metric socket and ratchet set with suitable extensions
- Correct line / flare spanners where required
- Brake-fluid extractor or workshop syringe
- Suitable hydraulic line plugs / caps
- Brake bleeding equipment
- Torque wrench appropriate to the fastener range
- Clean catch container and workshop protection materials
- Safety glasses and chemical-resistant workshop gloves
- Vehicle-specific technical data for torque and bleeding sequence
Workshop Labour Rate Reference
The table below helps buyers compare common hourly workshop rates. It is an hourly-rate reference only and does not claim a fixed repair duration for this component.
| Example Workshop Rate | 1 Hour | 2 Hours | 3 Hours | 4 Hours |
|---|---|---|---|---|
| £40 / hour | £40 | £80 | £120 | £160 |
| £60 / hour | £60 | £120 | £180 | £240 |
| £80 / hour | £80 | £160 | £240 | £320 |
| £100 / hour | £100 | £200 | £300 | £400 |
Illustrative arithmetic only. Actual workshop cost depends on the repairer's diagnosis, labour time, fluid, seals and associated work.
Professional Fitting Available
We can also provide a professional fitting service directly at our repair facility, subject to technician and workshop availability. Please contact us through eBay Messages before arranging a visit.
Secure Delivery & Worldwide Availability
Postage is not advertised as free in this description. Buyers pay the applicable delivery charge shown or calculated by eBay at checkout.
Eligible international orders may be securely processed through eBay's Global Shipping Programme, subject to destination and checkout availability. Supported destinations can include the UK, Europe, USA, Canada, Australia and other eligible territories.
Prepared Securely For Dispatch
Components are prepared and packed with care to reduce movement and protect vulnerable ports, fittings and mounting points during transit.
VAT Information
Returns & Buyer Responsibility
Please inspect all listing photographs, stamped or moulded numbers, pipe routing, connection points and bracket design before ordering. Automated compatibility tools are useful guidance but should not replace physical part-number and photograph verification.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Our complete statutory business identity, registered contact information and applicable business details are displayed by eBay within the Business Seller Information / Business Details section of the listing.