Vauxhall Insignia A 2008-2017 Dash Grille Sunload Auto Headlight Sensor 13578464
Vauxhall Insignia A 2008-2017 Dash Grille Sunload Auto Headlight Sensor 13578464
Vauxhall Insignia A Dashboard Centre Grille With Sunload / Automatic-Headlamp Sensor
Photo-verified sensor number 13578464 • donor marking: 2010 Insignia SRi • black upper-dashboard assembly
Actual item photographs
The assembly shown below is the item supplied. Please study every picture, including the rear clips, sensor housing and grille profile.
Before ordering, match the number 13578464, the black sensor dome, connector position, full grille outline, vent openings and every retaining clip against your original part. The complete trim assembly can differ even where a sensor number is shared.
Item details and engineering references
| Product | Upper-dashboard centre speaker/grille and demister trim assembly with solar/sunload and automatic-headlamp sensor |
| Confirmed sensor number | 13578464 — read from the sensor fitted to the photographed item |
| Earlier sensor reference | 13245030 — sensor cross-reference only; not proof that a complete grille assembly will fit |
| Later replacement reference | 13525291 — later sensor replacement reference; compare connector and vehicle specification |
| Additional sensor cross-reference | D1540J — sensor-only reference |
| Associated grille reference | 13274843 is found on visually matching Insignia A centre-grille assemblies. The moulded grille number is not clear enough in these photographs to present it as guaranteed for this item. |
| Vehicle generation | Vauxhall Insignia A / Mk1 / G09 |
| Confirmed donor marking | 2010 Vauxhall Insignia SRi |
| Placement | Front interior, top centre of dashboard, directly below the windscreen |
| Colour / finish | Black / dark charcoal, textured moulded finish |
| Material | Moulded automotive plastic trim with electronic light/sunload sensor |
| Included | The complete trim/grille and fitted sensor shown in the actual photographs |
| Not included | Centre speaker, dashboard wiring loom, loose fixings, tools or any item not visible in the actual photographs |
| Condition | Pre-owned original-production component. Expect normal age, storage and removal marks. Photograph condition takes priority over generic wording. |
| Warranty | 30-day seller warranty, subject to the listing terms and eBay return process |
| VAT | Sold under the VAT Margin Scheme / Global Accounting where applicable. VAT is accounted for on the margin and is not shown separately; no separately recoverable VAT invoice is supplied. |
Parts compatibility chart
This chart identifies the Insignia A applications that use this style of upper-dashboard assembly. The part-number and photograph match remains the final check.
| Make / model | Generation / chassis | Body style | Years to check | Fitment instruction |
|---|---|---|---|---|
| Vauxhall Insignia | A / Mk1 / G09 | 5-door hatchback / liftback | 2008-2017 | Order only after matching 13578464, connector, grille shape and clips. |
| Vauxhall Insignia | A / Mk1 / G09 | 4-door saloon | 2008-2017 | Order only after matching 13578464, connector, grille shape and clips. |
| Vauxhall Insignia | A / Mk1 / G09 | 5-door Sports Tourer / estate | 2009-2017 | Order only after matching 13578464, connector, grille shape and clips. |
Not confirmed — do not order for these applications
| Vehicle / situation | Reason |
|---|---|
| Insignia B, Grand Sport, newer Sports Tourer or GSi dashboard | Different generation and dashboard assembly. |
| Astra, Corsa, Meriva, Mokka, Zafira, Vectra or other Vauxhall models | No complete-assembly fitment has been verified. |
| Left-hand-drive Opel or overseas GM vehicle | The sensor may share references, but the complete right-hand-drive dashboard trim is not confirmed. |
| Any Insignia A with a different sensor dome, plug, grille profile or clip arrangement | Specification variation: photo matching is mandatory. |
| Other vehicles that separately list sensor 13578464 | This sale includes a vehicle-specific grille/trim assembly, not a bare universal sensor. |
Reference vehicle and fitting position
What this part does
Sunload and ambient-light sensing
The raised sensor receives light at the top of the dashboard. Depending on vehicle specification, its signal supports automatic headlamp operation and climate-control compensation for sunlight entering the cabin.
Dashboard airflow and centre grille
The moulded assembly finishes the upper dashboard, provides the centre grille area and forms part of the windscreen-side demister opening. It must sit correctly so that trim, clips and airflow openings align.
Possible symptoms of a faulty or damaged assembly
- Automatic headlights switch on or off at the wrong time, remain on in bright daylight, or respond inconsistently.
- Climate control responds poorly to strong sunlight or cabin temperature feels inconsistent between sunny and shaded conditions.
- A stored light/sunload-sensor circuit fault is found during diagnosis.
- The sensor dome is damaged, loose, covered or disconnected.
- The dashboard grille is cracked, distorted, missing clips, rattling or no longer sits flush.
These symptoms can also be caused by wiring, connector, control-module, coding or other sensor faults. Diagnose before replacing parts.
Why choose a matching original-production component?
Correct physical design
Factory-production trim is designed around the dashboard aperture, grain, clip positions, vent openings and sensor mounting used on the vehicle.
Connector and system match
Matching the original number and plug helps avoid poorly fitting copy parts, incorrect connectors and inconsistent sensor operation.
Lower-cost repair route
A quality pre-owned component can provide a substantial saving against a new replacement. Savings vary by supplier and current like-for-like price; no fixed percentage is promised.
Fitting guide
Suggested tools
Nylon trim-removal tools Plastic wedge Small pick for connector lock Torch Protective cloth Gloves Diagnostic scanner, if requiredInstallation steps
- Park safely, switch the ignition off, remove the key and allow vehicle systems to shut down. Follow the workshop procedure if battery disconnection is required.
- Cover the surrounding dashboard and windscreen edge with a clean protective cloth.
- Use a nylon trim tool to release the original grille evenly, working across the panel so that one corner is not heavily loaded.
- Lift the assembly only far enough to reach the electrical connector. Release the connector lock without pulling on the wires.
- Place the old and replacement assemblies side by side. Confirm sensor number, plug, sensor dome, grille outline, openings and every clip before continuing.
- If your specification uses a centre speaker and it is not included, transfer the existing speaker only where the mounting arrangement is identical.
- Connect the sensor, align all clips and press the panel down evenly. Stop if the panel does not sit naturally; do not force a mismatch.
- Test automatic-light response in changing light and check climate-control operation. Scan and clear stored faults where appropriate.
Static garage labour estimator — no JavaScript
Calculation: garage hourly rate × labour time. This table estimates labour only and excludes the part, diagnostics, extra repairs, call-out charges and any taxes charged by the garage.
| Garage rate | 0.5 hour | 0.75 hour |
|---|---|---|
| £50 per hour | £25.00 | £37.50 |
| £60 per hour | £30.00 | £45.00 |
| £75 per hour | £37.50 | £56.25 |
| £90 per hour | £45.00 | £67.50 |
| £110 per hour | £55.00 | £82.50 |
Fitting service: may be available subject to workshop capacity, vehicle condition and prior arrangement. Please enquire through eBay Messages before travelling or purchasing fitting.
Order the correct part first time
Buyer matching checklist
- Your vehicle is Insignia A / Mk1 / G09, not Insignia B.
- Your original sensor carries 13578464 or a verified compatible replacement reference.
- The connector shape, pin arrangement and lock position match.
- The sensor dome and its position in the grille match.
- The complete grille curve, demister openings and clip layout match.
- You have checked the actual photographs, not only eBay vehicle suggestions.
Fitment verification support
Unsure? Send clear photographs through eBay Messages showing:
- Your complete original part, front and rear.
- Every printed or moulded number.
- The electrical connector and pins.
- Your vehicle registration or VIN details where appropriate.
Verification is assistance, not a substitute for the buyer checking the part received against the original before installation.
Postage, checkout address, returns and VAT
UK and international delivery
Postage service, cost and estimated delivery are those shown by eBay in the listing and at checkout. Eligible international orders may be processed through eBay's Global Shipping Programme. Destination availability, import charges and exclusions are controlled by eBay and the buyer's delivery country, so a fixed country list is not stated here.
We dispatch only to the delivery address supplied by eBay at checkout. For account and seller-protection reasons, we cannot manually change the address after purchase. Where an address is incorrect, request cancellation and place a new order with the correct details.
Returns
This listing currently provides a 30-day return period. Returns must be opened and handled through eBay and the item must be securely packed with all supplied components. There is no automatic 50% fitment or “item not as described” fee. A deduction may be considered only where eBay rules and applicable law allow it, for an evidenced loss in value caused by use, damage, missing parts or inadequate return packaging.
VAT Margin Scheme / Global Accounting
This pre-owned item is sold under the VAT Margin Scheme / Global Accounting where applicable. VAT is accounted for on the seller's margin and is not shown separately. A VAT invoice showing separately recoverable input VAT is not available for a margin-scheme sale.
Workshop, warehouse and dispatch
ThePartPilot holds more than 25,000 vehicle parts in stock and offers fitting or repair support subject to workshop availability. The images in this section are licensed illustrative photographs and do not depict the supplied item, our exact premises or a guaranteed service booking.
Support a local small business and keep useful parts in service
🔧 Buying a quality recycled vehicle part supports a UK small business, reduces demand for new raw materials and helps keep serviceable components out of the waste stream. ♻️ It can also make a professional repair more affordable while preserving the correct factory-style fit and finish.
Thank you for checking fitment carefully and choosing ThePartPilot.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.