Vauxhall Opel Meriva A 2003-2010 Front Right Inner Door Handle 13121859 Chrome
Vauxhall Opel Meriva A 2003-2010 Front Right Inner Door Handle 13121859 Chrome
Vauxhall / Opel Meriva A 2003–2010 Front Right Inner Door Handle
Part number 13121859 • Front-right interior handle • Chrome-effect finish • Used original factory-marked part
Exact Item Photos — What You Receive
These are images from this eBay item, hosted on eBay's own HTTPS image service. Please compare them carefully with the part fitted to your vehicle.
Actual part: front / cosmetic face.
Number check: moulded identification visible on the supplied assembly.
Rear view: use this to compare mounts, cable interface and moulding.
Reference Vehicle — Correct Generation & Body Style
Reference vehicle only: Opel Meriva A / X03, 5-door body. Photo credit: M 93 / S 400 HYBRID. The photographed car is not the donor vehicle.
➜Inside the FRONT RIGHT door, behind the interior door trim.
UK right-hand-drive Vauxhall: driver's side / offside front (OSF).
Left-hand-drive Opel: front-right door is normally the passenger side.
The handle mechanically pulls the door-latch release mechanism through the Bowden cable / linkage. It is not an electronic control module.
Part Identification & Cross-Reference Guide
| Number / Marking | How to Use It | Confidence |
|---|---|---|
| 13121859 | Primary identification number moulded on the actual item and used in this listing. | Strongest match |
| 13121863 | Additional moulded number visible on this assembly. Treat as a component / related identifier; still match the complete handle and VIN. | Supporting reference |
| 13121872 | Seen in parts/recycler catalogues for Meriva A front-right interior handle assemblies. Do not use this number alone as proof of interchange. | Cross-reference only |
| 136022 | Short/catalogue reference associated with Meriva A interior-handle data. Verify before substitution. | Cross-reference only |
| 316 053 479 | Moulded component/manufacturing identifier visible on the part. Not recommended as a standalone vehicle-fitment number. | Component marking |
Vehicle Compatibility — Confirmed Model Family
This handle is associated with the first-generation Meriva A / X03 5-door. For SEO and buyer clarity, the applicable model years are listed individually below: 2003, 2004, 2005, 2006, 2007, 2008, 2009 and 2010. For 2010 vehicles, confirm the car is still the A / X03 generation.
| Make | Model | Generation / Chassis | Body | Years | Position | Status |
|---|---|---|---|---|---|---|
| Vauxhall | Meriva / Meriva Mk1 | A / X03 | 5-door MPV | 2003–2010* | Front right; UK RHD driver / OSF | Confirmed model family |
| Opel | Meriva | A / X03 | 5-door MPV | 2003–2010* | Front right | Confirmed model family |
*2010 = Meriva A / X03 only. Exact VIN-specific fitment should be checked before ordering if your original part number is not visible or does not match.
Do NOT buy this listing for:
- Meriva B / S10 second generation, including 2010-on B/S10 vehicles.
- Front-left interior door position.
- Any handle with different mounts, cable attachment, shape, colour/finish or identification numbers.
- Corsa, Astra, Zafira, Combo or any other model merely because the handle looks similar — no additional vehicle model is claimed here without verified evidence.
What This Handle Does
The front-right interior door handle is the cabin-side release lever for the door latch. Pulling the lever transfers movement through the handle's cable/linkage connection to release the latch so the door can be opened from inside.
Common symptoms of a failed or failing handle
- Handle feels loose, cracked or has excessive free play.
- Lever pulls but the door does not release from inside.
- Handle sticks or does not return cleanly.
- Cable attachment / retaining point has broken.
- Mounting carrier or trim surround is fractured.
- Chrome-effect finish or visible face is damaged and replacement is wanted for cosmetic restoration.
Material, Finish & Construction
The supplied assembly carries a PA6-GF moulding mark on the rear, indicating a glass-fibre-reinforced polyamide 6 component. The visible lever has a silver / chrome-effect finish. The complete assembly includes moulded structural, pivot, mounting and cable-interface features as pictured.
Condition: used. Expect age-related cosmetic marks consistent with a used vehicle part. Study the exact-item photographs before purchase.
Why Choose an Original Factory-Marked Used Part?
A factory-marked used component was designed around the vehicle's original trim, cable location, pivot geometry and mounting arrangement. That can reduce the fit, feel and alignment problems sometimes encountered with low-cost pattern copies.
Quality used parts can provide substantial savings compared with buying new. Across used vehicle parts, savings may reach up to 70% on some items; this is not a guaranteed saving against every current new-part price.
Fitting Guide — Front Interior Door Handle
Estimated workshop / competent-DIY time: allow approximately 0.5–1.0 labour hour. This is an estimate, not a manufacturer book time; seized fixings, broken trim clips or previous repairs can increase the time.
Typical tools required
- Plastic trim-removal tools.
- Suitable Torx driver / bit set for the vehicle's door-trim fasteners.
- Small flat trim tool or pick.
- Small ratchet / screwdriver handle.
- Panel-clip pliers (helpful, not always essential).
- Container or magnetic tray for screws and trim clips.
Outline procedure
- Park safely, switch the ignition off and open the front-right door.
- Protect painted and visible trim surfaces before levering any covers.
- Remove the relevant trim caps / covers and undo the door-card fasteners.
- Release the door-card perimeter clips with a trim tool and carefully lift the panel away.
- Disconnect any required trim electrical connectors only as necessary for safe access.
- Carefully peel back the moisture / vapour barrier only far enough to reach the inner handle area; avoid tearing it.
- Unclip the interior handle / bearing-support assembly from its mounting.
- Release the door-actuator Bowden cable from the old handle, noting its routing and retaining points.
- Connect the cable to the replacement handle and refit the handle securely.
- Before fully rebuilding the door, test handle movement and latch release with the door safely open.
- Reseal the moisture barrier, reconnect any unplugged connectors and refit the door panel and clips.
- Carry out a final function test from inside and outside the vehicle.
Static Garage Labour Cost Calculator
No JavaScript or active content is used. Use the table below for a quick labour-only estimate based on the approximate 0.5–1.0 hour fitting window.
Formula: garage hourly rate × labour time = estimated labour charge.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 / hour | £25.00 | £37.50 | £50.00 |
| £60 / hour | £30.00 | £45.00 | £60.00 |
| £70 / hour | £35.00 | £52.50 | £70.00 |
| £80 / hour | £40.00 | £60.00 | £80.00 |
| £90 / hour | £45.00 | £67.50 | £90.00 |
| £100 / hour | £50.00 | £75.00 | £100.00 |
| £120 / hour | £60.00 | £90.00 | £120.00 |
| £150 / hour | £75.00 | £112.50 | £150.00 |
Illustrative labour only. Diagnostic time, VAT status of the repairer, consumables, broken clips and additional faults are not included.
Fitting Service & Workshop Support
Fitting may be available subject to workshop capacity and appointment. Please contact us through eBay Messages before travelling so we can confirm availability and any applicable labour charge.
We can also help check your VIN and part number through eBay Messages before you order.
Illustrative workshop stock image — fitting service is subject to availability.
ThePartPilot Stock & Dispatch
We typically hold 25,000+ vehicle parts in stock and on the shelf. Our aim is simple: identify the right component, show the actual used part clearly and help buyers order correctly first time.
Illustrative stock image — warehouse / inventory theme.
Illustrative stock image — packed items ready for dispatch.
Delivery, International Shipping & Collection
- UK delivery: use the postage service and estimated delivery dates shown by eBay at checkout.
- International: this listing uses the eBay Global Shipping Programme where the item and destination are eligible. eBay states the programme reaches buyers in more than 100 markets; destination eligibility, import charges and delivery options shown at checkout are authoritative.
- Checkout address: please make sure your delivery address is correct before payment. We cannot manually redirect an order to a different address after checkout.
- Collection: collection can be arranged by prior appointment, 7 days a week up to 8pm, including bank holidays, subject to availability. Arrange collection through eBay Messages before travelling.
-
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns & Correct-Part Ordering
We provide detailed fitment guidance, exact-item photographs and part-number information to reduce incorrect orders. Please compare the part before buying and ask for a VIN check through eBay Messages if you are unsure.
Returns are handled in accordance with the return terms shown on the eBay listing, applicable consumer law and eBay policy. No blanket restocking fee is stated or charged here. If an item is returned used, altered, damaged or in a materially different condition, any deduction for actual loss in value can only be made where eBay's rules permit it.
VAT / Used-Goods Accounting
Where this used item is sold under the applicable VAT margin / global accounting scheme for second-hand goods, VAT is not shown separately on the invoice.
♻️ Support Reuse. Support a Small Business. 🌍
Choosing a serviceable used component keeps an existing part in circulation, reduces demand for new manufacturing and can prevent usable automotive components being discarded unnecessarily. Every reused part is a practical step toward lower material consumption and a more circular automotive economy.
By buying from ThePartPilot, you are also supporting an independent parts business focused on accurate identification, reuse and getting customers back on the road with the correct part first time. 🛠️📦