VW Golf Mk5 2004-09 Jetta Mk5 2005-10 Front Door Speaker Crossover 1K0035463D

VW Golf Mk5 2004-09 Jetta Mk5 2005-10 Front Door Speaker Crossover 1K0035463D

£18.18
Skip to product information
VW Golf Mk5 2004-09 Jetta Mk5 2005-10 Front Door Speaker Crossover 1K0035463D

VW Golf Mk5 2004-09 Jetta Mk5 2005-10 Front Door Speaker Crossover 1K0035463D

£18.18
TP
THEPARTPILOT
Precision parts • clear fitment • dependable dispatch

Volkswagen Front Door Speaker Crossover / Frequency Junction

Used factory-original Philips unit, Volkswagen part number 1K0 035 463 D / 1K0035463D, marked 4 Ω. Designed for selected factory multi-speaker installations only.

PART NO. 1K0035463DFRONT DOOR LOCATIONLEFT OR RIGHT — VERIFY FIRST30-DAY SELLER WARRANTY
FITMENT IS VIN- AND AUDIO-SYSTEM-SPECIFIC.
Do not order from model and registration year alone. Before purchase, compare the complete number 1K0 035 463 D, the connector, pin arrangement and mounting points with the unit removed from your vehicle. Send the full 17-character VIN through eBay Messages if verification is required. The factory build code commonly associated with this frequency junction is 8RW — 10 speakers, passive.

Actual Item Reference Photographs

Volkswagen 1K0035463D speaker crossover actual item front view
Actual part — overall front view
Label showing Volkswagen part number 1K0 035 463 D and 4 ohm
Label verification — 1K0 035 463 D / 4 Ω
Electrical connector on 1K0035463D frequency junction
Connector and pin-layout reference
Wiring and housing of Volkswagen front door speaker crossover
Housing and attached wiring reference
Side view of used Volkswagen speaker frequency crossover
Side profile and mounting detail
Additional actual condition image of part 1K0035463D
Actual used condition — inspect before ordering

These direct eBay image-host links show the listed used component. Cosmetic marks, dust, tape residue and handling marks may be present. Use the photographs as the primary condition and connector reference.

Part Specification

Volkswagen number1K0 035 463 D
Search format1K0035463D
Component typeFrequency crossover / junction
Electrical marking4 Ω
Supplier markingPhilips
ConstructionMoulded polymer housing, internal passive filter network
LocationInside a front door, behind the trim panel
PositionCatalogued for left or right; verify connector and mount
ConditionUsed replacement component

What This Part Does and Where It Is Fitted

Audio function

This is a passive frequency-management unit within the factory door-speaker circuit. It divides the audio signal into suitable frequency bands for the front-door woofer, mid-range driver and/or tweeter, helping the speaker system reproduce bass, mid-range and treble correctly.

It is not a universal aftermarket amplifier. Connector layout, impedance, speaker count and vehicle build specification must match.

Typical installation area

LOW / MID
SPEAKER
TWEETER
CROSSOVER
1K0035463D

Static location guide: behind the front door card, near the speaker assembly and inner door carrier. Exact mounting position varies with door and trim specification.

Compatibility Chart — Read Every Condition

Vehicle / market name Years used for search Body / generation Fitment status Mandatory confirmation
Volkswagen Golf Mk5 / Golf V 2004–2009 1K platform hatchback; 3-door or 5-door cannot be confirmed from year alone SELECTED VEHICLES ONLY VIN/build data, 8RW 10-speaker passive system, old part marked 1K0 035 463 D, matching plug and mount
Volkswagen Jetta Mk5 / Jetta V 2005–2010 1K platform saloon SELECTED VEHICLES ONLY VIN/build data, audio specification, exact old number, connector and mounting match
Volkswagen GTI — North American catalog naming 2006–2009 Mk5 / 1K CATALOG CROSS-REFERENCE Exact VIN and old component confirmation still required
Volkswagen Rabbit — North American catalog naming 2006–2009 Mk5 / 1K hatchback CATALOG CROSS-REFERENCE Exact VIN and old component confirmation still required
Volkswagen R32 — North American catalog naming 2008 Mk5 / 1K CATALOG CROSS-REFERENCE Exact VIN and old component confirmation still required
Volkswagen Jetta / Jetta Wagon / SportWagen — North American catalog naming 2005–2014 catalog range Saloon or estate name varies by market and year VIN CHECK ESSENTIAL Do not assume every 2005–2014 Jetta uses this part; confirm body, audio system and old label
Volkswagen Golf Plus 2005–2014 model range 5M platform PART-NUMBER CROSS-REFERENCE ONLY Buy only after VIN/build verification and an exact old-part, plug and mounting match

Important: A model appearing in this table does not mean every trim or audio package is compatible. Volkswagen used several speaker arrangements within the same year. The 17-character VIN and the original component label take priority over registration data, generic compatibility checkers and visual similarity.

This Part Will Not Fit

DO NOT PURCHASE FOR ANY OF THE FOLLOWING WITHOUT WRITTEN VIN CONFIRMATION:
  • Cars with a different speaker count, amplified premium sound package or a different factory PR/build code.
  • Cars whose original unit has a different final letter, connector, pin count, housing or mounting arrangement.
  • Golf Mk4, Golf Mk7/MQB and unrelated Volkswagen generations.
  • Any Audi, SEAT or Škoda application merely because it shares a platform; no cross-brand fit is claimed here.
  • Any vehicle selected only by engine size, registration number, colour, trim badge or model year.

Correct-Part Checklist — Buy Right First Time

🔎Match the full number and final letter
🔌Compare plug, pins and wire routing
🚘Supply the complete 17-character VIN
🎵Confirm the factory audio PR/build code

Best practice: remove the door trim and photograph the existing label and connector before ordering. A matching image and part number are stronger evidence than an auto-filled item-specific field.

Symptoms a Faulty Crossover May Cause

  • Loss of treble, mid-range or bass from one front door.
  • Muffled, thin or unbalanced sound.
  • Crackling, distortion or intermittent output.
  • One speaker channel silent while other doors operate normally.

These symptoms can also be caused by a damaged speaker, broken door-harness wiring, corroded terminals, head-unit coding or another audio component. Diagnose the circuit before ordering; replacing an untested part may not cure the fault.

Why Choose a Factory-Original Used Component?

Designed for the vehicle

A factory-original unit retains the intended plug, mounting geometry, electrical load and frequency filtering for the specified audio system. A low-cost universal copy may require adaptation and may alter sound balance or reliability.

Value and sustainability

A serviceable used component can deliver substantial savings compared with a new replacement while keeping an existing part in productive use. Actual savings vary by part, condition, availability and current new-part price.

Fitting Guide, Tools and Estimated Time

Safety first: door trims can contain side-airbag wiring, sharp edges and fragile clips. Follow manufacturer workshop information. Switch the ignition off and disconnect the battery only in accordance with the vehicle procedure. Do not turn the ignition on while airbag or door wiring is disconnected.
Protect the paint and trim around the front door. Record radio settings where applicable.
Remove the pull-handle/armrest trim and the relevant Torx screws.
Remove lower and edge fixings, then release the door-card clips with a plastic trim tool.
Lift the panel carefully; disconnect the interior-handle cable and electrical plugs.
Locate the crossover near the speaker assembly. Photograph the original wire routing and connector orientation.
Disconnect the plug, remove the mounting fixings and compare both parts side by side.
Confirm the full number, suffix, plug, pins and mounting points before installing the replacement.
Refit without trapping wiring, replace broken clips, reconnect and test balance/fade across all speakers.

Typical tools

Plastic trim-removal set, Torx T20/T25/T30 drivers, small ratchet, 10 mm battery spanner/socket where required, pick or small flat driver, clip pliers, torch, protective tape and replacement trim clips.

Fastener sizes can vary by model, door and prior repairs.

Estimated workshop time

Approximately 0.5–1.0 labour hour per front door for a competent technician after diagnosis. Seized fasteners, broken clips, wiring faults, water damage or additional testing can increase time.

Static Garage Labour Cost Estimator

No active calculator or JavaScript is used. Estimate labour by multiplying the garage hourly rate by booked time.

Garage rate 0.5 hour 0.75 hour 1.0 hour
£50 per hour £25.00 £37.50 £50.00
£70 per hour £35.00 £52.50 £70.00
£90 per hour £45.00 £67.50 £90.00
£120 per hour £60.00 £90.00 £120.00

Illustrative labour only. Excludes diagnosis, VAT charged by the garage, minimum booking fees, trim clips, wiring repairs and additional parts. Our own fitting service may be available by prior arrangement; request availability and a quotation through eBay Messages before purchase or travel.

Dispatch, International Delivery and Collection

📦Careful protective packing
🏬Over 25,000 parts held in stock
🌍International delivery where eligible
🛠️Fitting subject to availability

UK and international delivery: international postage is offered through the eBay international programme to eligible destinations displayed at checkout. Country eligibility, import charges and service availability are determined by eBay and the buyer's checkout destination.

Checkout address: confirm the full delivery address before payment. We can dispatch only to the address shown in the eBay order details and cannot redirect an order after checkout.

Collection: available by confirmed appointment 7 days a week up to 8 pm, including bank holidays subject to prior agreement. Arrange through eBay Messages before travelling.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

Returns, Warranty and Fitment Responsibility

30-day seller warranty and returns apply in line with the listing terms, eBay rules and statutory rights.

  • Do not install, modify, open or force the component until fitment has been confirmed.
  • Return the item with all supplied parts and in the same condition, using protective packaging.
  • Where eBay permits, a deduction may be made only for the actual loss in value if a return has been installed, altered, damaged, made incomplete or inadequately packed. This is not an automatic restocking charge.
  • Nothing in this description limits statutory rights or the eBay Money Back Guarantee.

VAT Margin Scheme

This second-hand item is sold under the VAT Margin Scheme / Global Accounting Scheme where applicable. VAT is accounted for within the margin, is not shown separately on the invoice and is not reclaimable as input VAT.

You may also like