VW Polo Mk5 6R 6C 2014-2017 Rear Tailgate Boot Gas Strut 325N 6R6827550C
VW Polo Mk5 6R 6C 2014-2017 Rear Tailgate Boot Gas Strut 325N 6R6827550C
| 25,000+ PARTS IN STOCK | PART-NUMBER MATCHING | FITTING MAY BE AVAILABLE | INTERNATIONAL DELIVERY OPTIONS |
THE PART PILOT
THE PART PILOT
THE PART PILOT
- Pre-owned component with age-related cosmetic marks possible.
- One strut is supplied; fixings or additional parts are not included unless visibly shown.
- Photographs form an important part of the description.
- Colour/finish: black cylinder and rod assembly with visible production markings.
- Inspect the close-up image before ordering; do not rely only on a generic part name.
THE PART PILOT
5-DOOR REFERENCE
This lift support mounts at the rear tailgate opening, between the vehicle body aperture and the tailgate. The Polo normally uses one support on each side.
Lower socket → body-side mounting ball
The pressurised strut assists the driver when lifting the tailgate, controls the opening movement and helps hold the tailgate safely in the raised position. A weak support can allow the tailgate to descend unexpectedly.
Safety note: never work beneath an unsupported tailgate.
| Detail | Verified / advertised information |
|---|---|
| Vehicle make/model | Volkswagen Polo Mk5 / Polo V, 6R and 6C generation |
| Part | Rear tailgate / boot gas strut / lift support |
| Manufacturer Part Number | 6R6827550C |
| Number format on part | 6R6 827 550 C |
| Interchange Part Number | 6R6827550A / 6R6 827 550 A appears as an earlier or alternate catalogue reference. Confirm by VIN and physical comparison before treating it as interchangeable. |
| Superseded Part Number | 6R6827550A is commonly cross-referenced to the C revision; exact vehicle build and original marking must still be checked. |
| Force marking | 325N visible on the photographed component |
| Placement | Rear tailgate; left or right side application where the same number is fitted |
| Quantity included | 1 × gas strut only |
| Material / construction | Steel pressure cylinder and piston rod assembly with metal ball-socket end fittings and black finish |
| Condition | Pre-owned factory-fit component; cosmetic storage or removal marks may be present |
| Seller warranty | 30 days, as shown in the current eBay item specifics |
| eBay Item Number | 147479020772 |
| VAT information | Sold under the VAT Global Accounting / second-hand margin arrangement. VAT is not separately itemised and no reclaimable VAT invoice is available. |
| Year | Vehicle / chassis | Body style | Fitment requirement |
|---|---|---|---|
| 2014 | Volkswagen Polo Mk5 6R / 6C | 3-door hatchback | Fits only when the original strut is 6R6827550C / 6R6 827 550 C, or a VIN check confirms the cross-reference. |
| 2014 | Volkswagen Polo Mk5 6R / 6C | 5-door hatchback | Same part-number and socket/shape check required. |
| 2015 | Volkswagen Polo Mk5 6R / 6C | 3-door hatchback | Same part-number and socket/shape check required. |
| 2015 | Volkswagen Polo Mk5 6R / 6C | 5-door hatchback | Same part-number and socket/shape check required. |
| 2016 | Volkswagen Polo Mk5 6R / 6C | 3-door hatchback | Same part-number and socket/shape check required. |
| 2016 | Volkswagen Polo Mk5 6R / 6C | 5-door hatchback | Same part-number and socket/shape check required. |
| 2017 | Volkswagen Polo Mk5 6R / 6C only | 3-door hatchback | Must be the 6R/6C generation; it does not fit the later AW-generation Polo. |
| 2017 | Volkswagen Polo Mk5 6R / 6C only | 5-door hatchback | Must be the 6R/6C generation; it does not fit the later AW-generation Polo. |
| 2014–2017 | Polo-derived van / panel-van variant | Rear hatch / commercial body | Conditional only: buy only when the original number, end fittings and VIN confirm 6R6827550C. |
This body component is selected primarily by generation, body style, tailgate design and part number , not by engine size. Compatibility examples associated with the listing include 1.0, 1.0 TSI, 1.2 TSI, 1.4 TDI, 1.4 TSI, 1.6 and 1.8 GTI variants. These engine references do not replace the physical part-number check.
3-door hatchback 5-door hatchback 6R / 6C generation 2014 2015 2016 2017- Volkswagen Polo 9N / 9N3, approximately 2001–2009 — earlier generation with different tailgate-support references.
- Volkswagen Polo AW / Mk6, including later 2017-on examples — different generation and tailgate design.
- Polo saloon, sedan or Classic with a separate boot-lid arrangement.
- Any Polo with a different stamped number, different end sockets, different length or different mounting geometry.
- Other Volkswagen models merely because the end fitting looks similar.
- Modified tailgates, unusually heavy spoilers or non-standard conversions unless suitability has been independently confirmed.
Read the number from the old strut and match 6R6827550C / 6R6 827 550 C.
Confirm 3-door or 5-door Mk5 hatchback, not a saloon and not the later AW model.
Advertised range is 2014, 2015, 2016 and 2017 6R/6C only.
Compare sockets, retaining clips, cylinder, rod and orientation with the photographs.
When uncertain, send the VIN and a clear photo of the old marking through eBay Messages before ordering.
- Tailgate will not remain fully open.
- Tailgate slowly sinks or drops without warning.
- Extra hand force is needed to lift the tailgate.
- Opening movement feels uneven from side to side.
- Visible oil residue, corrosion, bent rod or damaged socket.
- Knocking, clicking or looseness at the mounting ball.
- Tailgate opens only part way in cold conditions.
- One side appears to carry most of the load.
- The tailgate must be held manually while loading the vehicle.
- Unexpected closing creates a risk of injury or damage.
The photographed part carries the correct 6R6 827 550 C reference and 325N force marking. Matching the original number helps reduce uncertainty over force, travel, socket style and mounting geometry.
A correctly matched pre-owned factory-fit component can cost substantially less than purchasing a new part while keeping a serviceable component in use. It also avoids the fitment uncertainty associated with an unverified alternative.
Balanced advice: a pre-owned component has prior service life. Review the actual photographs and replace both sides where practical if the opposite strut is also weak, so tailgate loading remains balanced.
- Small flat-blade screwdriver or trim pick
- Protective gloves
- Eye protection
- Secure tailgate prop or second person
- Clean cloth
- One strut: approximately 10–20 minutes
- Both sides: approximately 20–30 minutes
- Times are estimates and assume accessible, undamaged mounts.
- Typical DIY level: basic
- No electrical coding normally required
- Stop if a ball stud, bracket or tailgate hinge is damaged.
- Park on level ground, switch off the ignition and open the tailgate fully.
- Have a second person hold the tailgate or position a secure mechanical prop. Confirm the tailgate cannot fall.
- Before removal, compare the replacement part number, force marking, end sockets and orientation with the old strut.
- At the first socket, insert a small flat screwdriver beneath the metal retaining clip and lift it only enough to release the ball stud. Do not distort or unnecessarily remove the clip.
- Pull the socket squarely away from the mounting ball. Repeat at the other end while continuing to support the tailgate.
- Install the replacement in the same orientation as the removed component. Align each socket with its ball stud and press firmly until it locks.
- Check that both retaining clips are seated and that the sockets cannot pull off by hand.
- Remove the support carefully. Open and close the tailgate slowly several times, checking for smooth operation, secure mountings and even support.
- Never puncture, heat, bend, clamp or paint the piston rod. Replace damaged mounting balls or brackets before using the tailgate.
| Garage hourly rate | 15 minutes / 0.25 hour | 30 minutes / 0.50 hour |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £70 per hour | £17.50 | £35.00 |
| £90 per hour | £22.50 | £45.00 |
| £120 per hour | £30.00 | £60.00 |
ILLUSTRATIVE IMAGE
A fitting service may be available subject to workshop capacity, prior booking, vehicle condition and location. Please ask through eBay Messages before purchase so availability and any labour charge can be confirmed within eBay.
Diagnosis is recommended where the tailgate is misaligned, the hinges are damaged, the mounting ball is loose or the replacement number does not match.
ILLUSTRATIVE STOCK
ILLUSTRATIVE DISPATCH
📦 More than 25,000 parts are held in stock at any one time.
🔎 Parts are identified using visible markings, photographs and fitment information to help customers order correctly.
🧰 Components are packed with protection appropriate to their shape and weight.
🚚 Delivery services and charges are shown in the eBay listing and at checkout. No delivery service should be assumed beyond the option selected in the order.
UK and international delivery: available services, dispatch estimates and charges are those displayed by eBay for the buyer’s destination.
International orders: eBay’s Global Shipping Programme or other eBay-managed international delivery may be available to eligible destinations. Availability, import charges and final cost are determined by eBay and shown at checkout; the eligible-country list can change and is therefore not fixed in this description.
Returns are handled through eBay in accordance with the return policy shown on this listing and applicable eBay buyer-protection rules.
To reduce avoidable returns, compare the stamped number, body style, generation, socket ends and photographs before purchase. When uncertain, send the VIN and a clear photograph of your original strut through eBay Messages for a fitment check.
Please select an accurate return reason and return the item in the same condition in which it was supplied, with all included components.
💙 Thank you for supporting ThePartPilot, a local specialist parts business.
♻️ Reusing a serviceable vehicle component can reduce demand for new raw materials, manufacturing energy and unnecessary waste. Choosing a carefully matched pre-owned part gives an existing component another useful life while often costing substantially less than a new replacement.
🤝 Our aim is clear identification, honest condition information and practical fitment guidance so buyers can order the correct part first time.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.