AUDI A4 B8 8K 2008-2015 CENTRE CONSOLE CUP HOLDER STORAGE TRIM

Factory-manufacturer centre console / cup-holder / storage trim assembly as pictured. The moulded part number visible on the supplied item photos is 8K0 864 981 D. This listing has been written around the photographed part and part-number family rather than relying only on generic item specifics.

This is for the A4 B8 / 8K platform, not simply any car registered between two dates. Compare the part number, overall console shape, cup-holder arrangement, storage section, front control/selector aperture, trim colour and connector layout with your existing part. If your vehicle is a 2015 transition-year car, confirm it is still the B8 / 8K generation and not the later B9 / 8W platform. If unsure, message us through eBay before purchase with your registration/VIN details and a clear photo of your existing console.

The photographs below are loaded from eBay's secure image CDN. Please use them as the primary visual fitment reference.

THEPARTPILOT Actual item — overall assembly	THEPARTPILOT Actual item — cup holder / storage layout
Actual item — underside / wiring / construction	Photo-verified marking: 8K0 864 981 D • PC/ABS

The earlier wording “complete console” can cause confusion. Please buy from the photographs and this included/not-included list rather than assuming every centre-console control is supplied.

These are reference images only, not the donor vehicle. They are public-domain/CC0 images used to show the correct B8 generation and the centre-console location.

A4 B8 Saloon 4-door reference — B8 / 8K family	A4 B8 Avant 5-door reference — B8 / 8K family
2012 A4 B8 right-hand-drive interior reference — the replacement console fits along the centre tunnel shown between the front seats

The photographed 8K0864981D storage-bin component and the related 8K console-base family are catalogued across the following Audi applications in US-market model-year data. This confirms a strong component-family relationship, but does not automatically prove the entire photographed console assembly is identical on every trim/body/control configuration.

The centre console runs along the vehicle's centre tunnel between the front seats. This assembly provides the physical mounting and finished interior structure for the cup-holder/storage area and the surrounding selector/control-panel zone. Depending on vehicle specification, separate controls, sockets, switch packs and decorative inserts mount into or around it.

Important: the plastic console itself is primarily a structural/trim/storage component; it is not an electronic control module. Any MMI, selector, switch or socket function is performed by the separate component fitted into the console.

An original manufacturer part is moulded around the factory mounting points, clip positions, apertures, surface texture and surrounding trim geometry. A low-cost copy can look similar in a photograph but may differ in clip tension, panel gaps, texture, colour, aperture dimensions or mounting detail. Correct geometry matters on a centre console because several surrounding trim and control pieces must sit together cleanly without rattles or uneven gaps.

Choosing a pre-owned original-manufacturer component also gives you the opportunity to retain factory-style fit and finish while paying substantially less than an equivalent new replacement. On selected parts, pre-owned components can represent savings of up to 70% compared with new replacement pricing.

1. Park securely, switch the ignition off, remove the key and protect adjacent interior trim.
2. Photograph the existing console and connector routing before dismantling.
3. Use plastic trim tools to release the relevant side/selector/control trim without forcing clips.
4. Remove the selector/MMI/control trim as applicable to your specification and disconnect any plugs carefully.
5. Remove the console retaining screws/bolts and note the position of each fastener.
6. Lift the old console clear, checking for hidden wiring or sockets before fully removing it.
7. Transfer any controls, sockets, inserts, brackets or trim pieces that are not included with the replacement part.
8. Position the replacement console, route wiring exactly as required and ensure no harness is trapped.
9. Reconnect electrical items, temporarily test switches/socket/illumination where applicable, then refit the trim and tighten fixings evenly.
10. Final-check panel gaps, cup-holder operation, secure fitment and all transferred controls before returning the vehicle to service.

No JavaScript is used. Use the table below to estimate labour from the planning range of 1.0-1.5 hours. Formula: Garage hourly rate × estimated hours = estimated labour charge.

Labour prices are illustrative only. Diagnostic work, damaged fixings, additional parts, trim transfer and local VAT/pricing can alter the final garage quote.

ThePartPilot carries more than 25,000 parts in stock and on the shelf at any one time, helping us support a wide range of repair and replacement requirements. If you cannot find the part you need, contact us through eBay Messages with the vehicle details and part number.

Illustrative stock / warehouse image

Illustrative workshop image — fitting subject to availability

Illustrative packing / dispatch image

Where this item is eligible, international delivery is handled through eBay's Global Shipping Programme. eBay calculates international postage, customs/import charges where applicable and destination availability at checkout.

Destination lists and item eligibility can change. The delivery options shown by eBay at checkout are the final authority for a specific order.

Please make sure the delivery address shown at eBay checkout is complete and correct. We cannot manually change the checkout delivery address after the order has been placed.

We provide detailed photographs, part numbers, compatibility notes and a fitment checklist to help you order the correct part first time. Please compare your existing part before ordering and ask us through eBay Messages if you are unsure.

Returns are handled according to the listing terms and eBay's applicable policies. If a returned item has suffered a material loss in value because it has been altered, damaged, returned incomplete or otherwise returned in a poorer condition, an appropriate deduction may be made only where eBay permits.

Where this pre-owned part is sold under the applicable second-hand / Global Accounting margin scheme, VAT is not separately itemised and no reclaimable VAT invoice is available. International buyers may still be charged destination import VAT, duties or other charges by eBay/customs where applicable.

Buying a quality pre-owned vehicle part supports a local parts business while extending the useful life of a component that might otherwise be discarded. Reusing serviceable parts can reduce demand for new raw materials, manufacturing, packaging and the unnecessary disposal of usable components. 🌍🔧🚗

Thank you for choosing ThePartPilot. Detailed fitment support, careful part matching and responsible reuse are at the heart of what we do.

Send us an eBay Message before ordering with your vehicle registration/VIN details, existing part number and a clear photo of your current console. We will help you compare the key fitment points.

WhatsApp QR for Fitment Help / Appointment Enquiries