Audi A4, S4 (B7-8E-8H) 2006 Tailgate trunk strut damper 8E5827552J01S GIR9451
Audi A4, S4 (B7-8E-8H) 2006 Tailgate trunk strut damper 8E5827552J01S GIR9451
ThePartPilot
Premium OEM-Spec Recycled Auto Parts | Worldwide Delivery | Expert Fitting
Item Overview & Specifications
Vehicle Application: Audi A4 / S4 B7 Avant (Estate) Models (2004 - 2008)
Part Name: Tailgate / Trunk Boot Gas Strut / Damper
Part Number: 8E5 827 552 J / 8E5827552J01S (Stated on casing: GIR9451)
Material Specifications: High-grade nitrided steel piston rod, corrosion-resistant black painted heavy-duty cylinder tube, reinforced precision-molded nylon end ball-socket fittings.
Condition: Fully tested, premium recycled original part in excellent working order.
Reference Fitment & Location in Vehicle
This gas strut is designed specifically for the Audi A4 / S4 B7 Avant (5-Door Estate) model. It mounts on the rear D-pillar / tailgate hinge structure to support and control the opening and closing of the heavy rear tailgate boot lid.
Note: The photos above show the exact 5-door Avant estate model that this tailgate strut fits. Please verify your vehicle body style and part number from the pictures before ordering.
Parts Compatibility Chart (Know Before You Buy)
To ensure you order the correct part the first time and avoid unnecessary returns, please review our precise compatibility breakdown below. Always check your existing part number (8E5 827 552 J) and vehicle pictures rather than relying solely on generic eBay item specifics.
| Make, Model & Body Style | Fitment Years | Compatibility Status |
|---|---|---|
| Audi A4 B7 Avant (5-Door Estate / Wagon) | 2004 - 2008 | ✔ WILL FIT (Direct OEM Match) |
| Audi S4 B7 Avant (5-Door Estate / Wagon) | 2004 - 2008 | ✔ WILL FIT (Direct OEM Match) |
| Audi A4 / S4 B7 Saloon / Sedan (4-Door) | 2004 - 2008 | ✖ WILL NOT FIT (Different boot strut length & pressure) |
| Audi A4 / S4 B7 Cabriolet (Convertible) | 2005 - 2009 | ✖ WILL NOT FIT (Different mechanism) |
| Audi A4 B6 Avant (2001 - 2004) | 2001 - 2004 | ⚠️ Verify Part Number (May require 8E9 prefix) |
Customers must verify fitment using the provided part number (8E5827552J) and images. Any parts returned under the "Doesn't Fit" or "Item Not As Described" category will have a 50% restock fee deducted because we have fully clarified the exact vehicle models, years, and part numbers above. If you are unsure, message us first and we will gladly verify fitment for you!
🚨 IMPORTANT ADDRESS NOTICE: Customers must ensure their checkout delivery address is correct before completing payment. We cannot change or alter delivery addresses after checkout due to security policies.
Symptoms of Failure & Why Choose Original Parts
Symptoms of a Failing Tailgate Strut:
- Tailgate trunk lid drops or fails to stay fully open on its own.
- Boot lid feels unusually heavy to lift up.
- SUDDEN DROP hazard in cold weather conditions.
- Visible oil weeping or corrosion along the piston rod casing.
Benefits of Original vs. Cheap Aftermarket Copies:
- Exact factory gas pressure rating—won't pop open too violently or fail to hold weight.
- Precision-engineered ball socket clips for secure, rattle-free mounting.
- Superior corrosion resistance and multi-year durability.
- Save as much as 70% buying tested recycled original parts instead of paying high dealer retail prices!
Fitting Guide, Required Tools & Garage Cost Calculator
DIY Fitting Instructions:
- Prop up the tailgate securely with a prop rod or get an assistant to hold it fully open.
- Use a small flathead screwdriver to gently pry up the metal spring clip on each end of the old strut.
- Pull the strut socket off the vehicle ball stud (repeat for top and bottom).
- Clean the ball studs and apply a light smear of grease.
- Clip the new strut onto the ball studs firmly until the retaining clips snap into place.
Required Tools: Small flathead screwdriver or trim removal tool, Prop rod.
Estimated DIY Repair Time: 10 - 15 Minutes
🧮 Professional Garage Labour Cost Calculator
If you prefer a professional garage to fit this strut, here is an estimate based on standard hourly workshop rates:
- Standard Garage Labour Rate: £60.00 - £80.00 per hour
- Estimated Fitting Time: 0.25 Hours (15 Mins)
- Estimated Garage Cost: £15.00 - £20.00
*Note: Labour rates vary by region. We also offer an expert fitting service at our workshop subject to availability! Contact us to schedule an appointment.
Our Stock, Warehouse & Global Services
With more than 25,000 parts in stock and on the shelf at any one time, ThePartPilot is your dependable partner for recycled OEM components. We also operate a professional mechanic repair garage and offer repairs subject to availability.
Got an unwanted vehicle? We offer nationwide collection & same day instant payment. Message us for a valuation quote today!
Postage & VAT Information:
- Worldwide Delivery: We offer worldwide shipping via the eBay Global Shipping Programme (GSP). All eligible countries are supported. (Standard postage rates apply).
- Postage Terms: Please note: We do NOT offer free postage. Shipping rates are clearly calculated at checkout.
- VAT Status: We operate on the Global VAT Scheme, meaning NO VAT is charged on this transaction.
Support Local Business & Sustainable Recycling 🌍💚
By purchasing from ThePartPilot, you are supporting an independent British small business dedicated to automotive excellence. Choosing high-quality recycled original parts actively helps protect our planet by reducing manufacturing carbon footprints and keeping perfectly engineered components out of landfills. Thank you for choosing sustainable repair! 🤝♻️
📱 Instant WhatsApp Support & Location Enquiry
Have questions about fitment or need assistance? Scan the QR code below or message us directly on WhatsApp at:
(Scan with your smartphone camera to chat instantly with our parts team)