BMW 1 Series F20 F21 LCI 2015-2017 NSR Left Inner LED Tailgate Light 7359019
BMW 1 Series F20 F21 LCI 2015-2017 NSR Left Inner LED Tailgate Light 7359019
BMW 1 Series F20 / F21 LCI Left Rear Inner LED Tailgate Lamp
BMW part number 63 21 7 359 019 · Short number 7359019 · Left / nearside / UK passenger side · Inner tailgate position
Actual Item Photographs
The photographs below are taken from this eBay item. Please inspect the lens, housing, connector, fixing points and label carefully. The item shown is the item supplied unless the listing quantity states otherwise.
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
Part Identification
Five Checks Before Buying
- Part number: your existing lamp should show 63217359019 or the short number 7359019.
- Vehicle: confirm BMW 1 Series F20 LCI 5-door or F21 LCI 3-door — not F40.
- Date: this version is for the first LCI application and BMW specifies it for vehicles up to 30 June 2017. Registration year alone is not enough.
- Position: left/nearside/UK passenger side, mounted in the tailgate — not the outer lamp in the rear quarter panel.
- Picture match: compare the lens outline, plug, pin layout, locating tabs, mounting studs and rear housing with your original unit.
Verified Compatibility
| Vehicle | Body | Models Listed For This Number | Production / Version | Result |
|---|---|---|---|---|
| BMW 1 Series F20 LCI | 5-door hatchback | 114d, 116d, 116d ED, 116i, 118d, 118d xDrive, 118i, 120d, 120d xDrive, 120i, 125d, 125i, M135i, M135i xDrive, M140i, M140i xDrive | LCI; up to 30/06/2017. Confirm VIN and lamp number. | FITS |
| BMW 1 Series F21 LCI | 3-door hatchback | 114d, 116d, 116d ED, 116i, 118d, 118d xDrive, 118i, 120d, 120d xDrive, 120i, 125d, 125i, M135i, M135i xDrive, M140i, M140i xDrive | LCI; up to 30/06/2017. Confirm VIN and lamp number. | FITS |
Will Not Fit
| Excluded Vehicle / Part | Reason | Result |
|---|---|---|
| BMW 1 Series F40, including 2019-on 118i | Different generation, lamp shape, body and part-number family. | DOES NOT FIT |
| F20 / F21 pre-facelift | Different rear-light design. This listing is for the LCI inner lamp. | DOES NOT FIT |
| F20 / F21 later July-2017-on lamp version | BMW specifies 63217359019 for vehicles only up to 30/06/2017. | DOES NOT FIT |
| Right / offside / UK driver-side inner lamp | This item is the left-hand lamp. | DOES NOT FIT |
| Left outer rear-quarter lamp | This item mounts in the movable tailgate, not the fixed rear wing. | DOES NOT FIT |
| BMW 2 Series, 3 Series, X1 or other BMW ranges | No cross-fitment is confirmed by the photographed number. | DOES NOT FIT |
Correct Vehicle Body References
This number is listed for both the F20 LCI 5-door and F21 LCI 3-door. The images show the correct body generations and the inner tailgate lamp position. They are reference images only; trim, colour and wheels vary.
Vehicle photographs are manufacturer media used only to identify the applicable body shape and lamp location. They do not show the donor vehicle or the exact item supplied.
Detailed Description
Used factory-original BMW 1 Series rear inner lamp for the left/nearside/UK passenger side. It mounts in the inner section of the tailgate or boot lid and forms the inboard half of the rear-light assembly. The photographed label identifies it as BMW number 63217359019, short number 7359019, with supplier marking F03603000.
This is the correct application for the first F20/F21 facelift rear-light design, subject to VIN and number confirmation. The unit works with the outer rear-quarter lamp as part of the vehicle's rear visibility and signalling system. Exact illuminated functions can vary by market and specification, so all rear-light functions must be tested after installation.
A used factory part can retain the original shape, connector arrangement, locating points and optical styling of the vehicle. This can offer a more predictable physical match than an unverified low-cost copy. Used parts can also cost substantially less than a new dealer-supplied component, although the exact saving varies by item and current retail price.
Common Reasons For Replacement
Possible Symptoms
- Rear lamp does not illuminate correctly.
- Intermittent, dim or flickering light output.
- Dashboard bulb or lighting warning.
- Cracked, chipped or heavily scratched lens.
- Water entry, persistent condensation or corroded connection.
- Broken mounting tab, stud or rear housing.
- Failed vehicle inspection caused by an inoperative rear lamp.
Why Replacement Matters
- Helps other road users see the vehicle and its signals.
- Restores the complete appearance of the rear lamp cluster.
- Reduces the risk of an electrical fault caused by moisture or damage.
- Helps restore secure mounting and a proper seal against the body.
- Supports roadworthiness when the correct functions operate normally.
Condition & What Is Supplied
- Used automotive component; normal storage, handling and age-related marks may be present.
- Please judge cosmetic condition from the high-resolution actual-item photographs.
- Lamp assembly only, with only the holders, seals, fixings or attachments visibly present in the photographs.
- Do not assume bulbs, trim panels, wiring loom, nuts or additional hardware are included unless pictured.
- Check the connector pins are clean and that your vehicle-side wiring fault is repaired before fitting.
- 30-day seller warranty applies in accordance with the listing terms.
Fitting Guide
Tools Normally Required
- Plastic trim-removal tool
- Small metric socket and ratchet set
- Short extension
- Screwdriver / bit set
- Protective gloves and torch
- Masking tape or protective cloth
- Electrical contact cleaner, if required
Estimated Time
Experienced fitter: approximately 20–45 minutes.
DIY allowance: approximately 30–60 minutes.
Difficulty: easy to moderate, depending on trim access, seized fixings and previous damage.
This is an estimate, not a manufacturer book time.
- Park safely, switch off the ignition and all exterior lights, open the tailgate and protect painted surfaces.
- Carefully remove the left tailgate trim/access cover using a plastic trim tool. Do not force hidden clips.
- Release the electrical connector locking tab and disconnect the plug without pulling on the wires.
- Support the lamp and remove its retaining fasteners using the correctly fitting metric socket.
- Withdraw the lamp straight from the tailgate. Avoid levering against the paint or lens.
- Compare the part number, connector, locating tabs, mounting studs, seal and lens profile with the removed unit.
- Clean the body contact surface. Transfer or renew any separate seal or holder only where required and compatible.
- Position the lamp evenly, start all fasteners by hand and tighten gently and evenly. Do not overtighten plastic parts.
- Reconnect the plug, refit the trim and test every rear-light function. Check that the lamp sits flush and remains dry.
Static Garage Labour Cost Guide
An interactive calculator would require JavaScript, which is not used in this eBay-safe description. Use the table below: labour rate × chargeable hours = estimated labour cost. Parts, diagnostics, VAT and additional repairs are not included.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 per hour | £25.00 | £37.50 | £50.00 |
| £70 per hour | £35.00 | £52.50 | £70.00 |
| £90 per hour | £45.00 | £67.50 | £90.00 |
| £120 per hour | £60.00 | £90.00 | £120.00 |
Fitting and repair services may be available subject to workshop capacity. Arrange and confirm availability through eBay Messages before travelling.
Workshop, Stock & Dispatch
Illustrative workshop image. Repair and fitting services are subject to availability.
Illustrative warehouse image. ThePartPilot carries more than 25,000 parts on shelf at any one time.
Collection
Collection is available 7 days a week until 8pm by prior appointment, including bank holidays, subject to availability.
Please arrange through eBay Messages and wait for confirmation before travelling.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery, Returns & VAT
UK & International Delivery
International delivery is available to eligible destinations displayed by eBay at checkout through the applicable eBay shipping programme. Availability, charges, exclusions, customs and import costs depend on the item and destination shown by eBay.
Returns
Returns are handled under the listing return policy and eBay rules. Where the seller is eligible, a deduction of up to 50% may be made only when an item is returned used, damaged, altered, incomplete or otherwise in a different condition, and only to reflect the actual loss in value. There is no automatic 50% restocking deduction solely because a buyer selects a particular return reason.
VAT
Global Accounting VAT Margin Scheme — second-hand goods. VAT is not shown separately and is not recoverable as input tax by the buyer.
Fitment Responsibility
The compatibility chart is provided to reduce wrong orders, but the buyer must still match the number and photographs. We can assist with a VIN and a clear photograph of the old lamp label through eBay Messages.
Support Reuse & Independent Business ♻️
Buying a serviceable used component supports a local independent business, keeps useful automotive parts in circulation and can reduce the demand for new raw materials, manufacturing and unnecessary waste. Thank you for choosing reuse, careful fitment checking and responsible vehicle repair. 🚗🔧📦🌍