Chevrolet Kalos T200 2003-2008 Glove Box Compartment Black Dashboard Storage
Chevrolet Kalos T200 2003-2008 Glove Box Compartment Black Dashboard Storage
CHEVROLET KALOS T200
This listing is for the glove box / dashboard storage assembly shown in the listing photographs. Vehicle registrations and eBay compatibility suggestions alone should NOT be relied upon to identify interior trim.
Compare the shape, mounting points, colour, handle, lock arrangement and rear moulding of your existing component with the photographs before purchase.
If you are unsure, contact THEPARTPILOT before ordering with your 17-character VIN and clear photographs of the existing glove box. We will check the information available to us before confirming compatibility.
VEHICLE COMPATIBILITY GUIDE
| Vehicle | Platform | Years | Status |
|---|---|---|---|
| Chevrolet Kalos | T200 | 2003–2008 | Advertised application — visual/VIN verification recommended |
| Chevrolet Aveo / Kalos derivatives | T200 | 2003–2008 | DO NOT assume fitment — VIN and component comparison required |
| Chevrolet Aveo | T250 / T255 | Later generation | NOT confirmed by this listing |
| Chevrolet Aveo | T300 | 2011 onward | NOT FOR THIS GENERATION |
PART SPECIFICATION
| Part | Complete Glove Box / Storage Compartment |
| Installation Area | Passenger side of dashboard / instrument panel |
| Colour | Black |
| Material | Moulded automotive plastic |
| Included | Glove box assembly / lock as photographed |
| Condition | Used — inspect listing photographs for cosmetic condition |
Numbers associated with the existing listing include: 8392792 / 96462792 / 9634730-96.
These numbers should NOT be treated as definitive manufacturer glove-box identification without comparison to the markings on the supplied part. Match the physical component and contact us with your VIN if uncertain.
WHERE IS THIS PART FITTED?
The glove box is installed into the passenger side of the dashboard / instrument panel. It provides enclosed cabin storage and uses its handle, latch/lock and mounting points to retain the compartment securely in the dashboard.
A correctly fitting assembly should sit consistently with the surrounding dashboard, open without binding and latch securely when closed.
REFERENCE — INSTALLED LOCATION
Reference vehicle/location image only. The supplied used component and its condition are shown in the eBay listing photographs.
DASHBOARD LOCATION REFERENCE
COMMON REASONS FOR REPLACEMENT
- Broken or cracked glove-box lid or compartment
- Damaged hinge or pivot points
- Glove box will not remain securely closed
- Broken handle or latch mechanism
- Damaged mounting points
- Interior damage following removal or previous repair work
- Excessive cosmetic damage to the original dashboard storage unit
WHY CHOOSE AN ORIGINAL-VEHICLE USED PART?
An original-vehicle component was manufactured to the dimensions, mounting architecture and interior finish specified for the vehicle in which it was installed. This can make a correctly matched used component preferable to a low-cost pattern replacement where moulding accuracy, texture, latch alignment or mounting geometry may differ.
Buying quality used automotive components can also represent a substantial saving compared with buying an equivalent replacement new. Depending on the component and new-part availability, used parts can offer savings of up to 70%.
Most importantly: the correct used part is better than the wrong new part. Please use the compatibility information and ask us to verify your vehicle if there is any uncertainty.
FITTING GUIDE
- Park safely, switch off the ignition and remove the key.
- Empty the existing glove compartment.
- Open the glove box fully and inspect its hinge, stops and mounting points.
- Remove the appropriate retaining screws/clips for your exact vehicle specification.
- Support the compartment while releasing the final mounting points.
- Remove the old assembly carefully without forcing surrounding dashboard trim.
- Compare old and replacement parts side-by-side before installation.
- Transfer any reusable vehicle-specific hardware where required.
- Position the replacement unit and secure the original mounting hardware.
- Check alignment, opening movement, latch operation and secure closure.
Typical Tools
Trim removal tools • Screwdriver set • Small socket set • Ratchet • Torch/work light • Protective gloves
Indicative fitting time: approximately 0.5–1.0 labour hour for straightforward replacement. Additional work, damaged fixings or specification differences can increase fitting time.
GARAGE LABOUR COST ESTIMATOR
No active scripts are used in this listing. Use the matrix below as a quick guide. Labour prices vary by garage and location.
| Hourly Rate | 0.5 Hour | 1.0 Hour |
|---|---|---|
| £50/hour | £25 | £50 |
| £75/hour | £37.50 | £75 |
| £100/hour | £50 | £100 |
| £125/hour | £62.50 | £125 |
THEPARTPILOT may also be able to provide a fitting / repair service, subject to workshop availability and prior arrangement.
We dismantle, stock and supply a large range of used vehicle components. If this isn't the part you require, check our other listings or contact us with your VIN and the component required.
COLLECTION & FITTING
✓ Collection available 7 days a week until 8pm by prior appointment
✓ Bank-holiday collection available by prior appointment
✓ Fitting and repair services subject to availability
✓ Please arrange collection before travelling
NEED A FITMENT CHECK?
Send your VIN + registration + photograph of your existing part before ordering.
Scan the QR code with your phone camera to start a WhatsApp conversation.
UK & INTERNATIONAL DELIVERY
International delivery is available on eligible orders through eBay's international shipping programme. Destination availability, import eligibility, postage charges and any applicable charges are determined by eBay at checkout.
Current GSP destinations include eligible European markets plus destinations across North America, South America, Asia, Oceania, the Middle East, Africa and the Caribbean.
PLEASE HELP US PREVENT WRONG-PART RETURNS
Interior components can vary by production date, trim specification, dashboard version and market. Please compare the listing photographs carefully.
If unsure, contact us before purchase. We can review the VIN and photographs supplied by you to help identify the correct component.
Any return is handled in accordance with the return terms displayed on the eBay order/listing and your applicable statutory rights. Nothing in this description limits rights that cannot legally be excluded.
SUPPORT A SMALL BUSINESS • REUSE • RECYCLE
Buying a quality used vehicle part keeps a serviceable component in circulation rather than unnecessarily replacing it with another newly manufactured item. Reuse helps reduce waste and makes maintaining older vehicles more economical.
Every order also supports an independent automotive parts business and the people involved in dismantling, identifying, storing, picking, packing and dispatching thousands of reusable vehicle components.
CAREFULLY PICKED, PACKED & DISPATCHED
Components are selected from our stocked inventory and prepared for dispatch with appropriate packaging for the item type.
Vehicle/reference photographs are for identification and installation-location guidance only. Always identify the supplied component from the actual listing photographs before purchase.