Citroen C1 Peugeot 108 Toyota Aygo Mk2 2014-2021 Valeo Door Lock ECU 89740-0H040
Citroen C1 Peugeot 108 Toyota Aygo Mk2 2014-2021 Valeo Door Lock ECU 89740-0H040
2014–2021 DOOR LOCK / CONTROL RECEIVER ECU
THE ACTUAL PART YOU ARE BUYING
This listing is for a Valeo door-control / central-locking receiver module used on selected second-generation Citroën C1, Peugeot 108 and Toyota Aygo applications. The photographed unit carries the key identification markings shown below. Please compare every number and the physical bracket against your original component before purchasing.
The physical module photographed in this listing is stamped 89740-0H040. The source eBay item-specific data also contains 89740-0H040D. Do not assume a suffix is interchangeable simply because the vehicle make, model or year looks correct. Match the photographed label, connector arrangement and mounting bracket to the part removed from your vehicle.
ITEM DETAILS & ENGINEERING REFERENCES
WHY CHOOSE AN ORIGINAL FACTORY COMPONENT?
Correct factory-designed components are built around the vehicle's intended connector geometry, mounting arrangement, electrical specification and packaging space. Lower-cost replacement copies can differ in materials, tolerances, bracket alignment and electronic behaviour. For electronic modules in particular, an exact code match is far more important than simply choosing the cheapest part that looks similar.
WHAT DOES THIS MODULE DO?
The photographed Valeo unit is identified on its label as a receiver and is sold as a door-control / central-locking module. Its role is associated with receiving remote locking commands and passing the relevant command into the vehicle's door-locking electronics. The physical door lock actuators then perform the mechanical locking or unlocking action.
VERIFIED COMPATIBILITY GUIDE
The table deliberately separates confirmed engine/chassis information from broader source-listing coverage. Exact printed module identification remains the final purchasing check.
| Vehicle | Years | Chassis / Generation | Engine Data Found With Same Part Reference | Fitment Requirement |
|---|---|---|---|---|
| Citroën C1 II | 2014–2021 | PA_, PS_ |
1.0 VTi: CFB / 1KR, 998cc 1.2 VTi 82: HMT / EB2D and HMZ / EB2 family |
Match 89740-0H040 and physical receiver/bracket |
| Toyota Aygo Mk2 | 2014–2021 | _B4_ generation |
1.0 Petrol: 1KR-FE, 998cc 51kW / 69HP applications confirmed with same number |
Match 89740-0H040 and connector / bracket |
| Peugeot 108 | 2014–2021* | 108 shared-generation platform |
1.0: CFB / 1KR, 998cc 1.0 VTi 72: CFB / 1KR 1.2: HMT / EB2D and HMZ / EB2 family |
*Source listing extends to 2021. Exact-code compatibility data checked separately supports multiple applications through 2020. For 2021, verify the stamped module number before purchase. |
Buyers are strongly urged to verify fitment from the high-resolution photographs, exact stamped numbers, receiver code, connector and mounting bracket rather than relying solely on an automated vehicle-registration, catalogue or item-specific dropdown.
3-DOOR VS 5-DOOR BODY CHECK
3-DOOR HATCH
Second-generation vehicles were produced in 3-door form. The 89740-0H040 receiver has appeared on 3-door applications. Door count by itself does not guarantee compatibility.
5-DOOR HATCH
The same vehicle family was also produced in 5-door form, and the same receiver number has appeared on 5-door applications. Always compare the physical module and identification label.
TECHNICAL MOUNTING REFERENCE
The source listing identifies the placement as Front, but it does not provide enough evidence to claim an exact left/right chassis mounting point. The diagram is therefore deliberately schematic rather than inventing a location.
MATCH THE EXISTING RECEIVER'S BRACKET, CONNECTOR & MOUNTING POINT
If your existing receiver has a different bracket, connector orientation, printed number or mounting arrangement, stop and verify compatibility first.
WILL NOT FIT / EXCLUSION GUIDE
| Do Not Assume Compatibility With | Reason |
|---|---|
| First-generation Citroën C1 / Peugeot 107 / Toyota Aygo | Different vehicle generation and electrical architecture. |
| Toyota Aygo X generation | Later vehicle generation — do not transfer Mk2 compatibility automatically. |
| Any module carrying a different stamped receiver number | A visual resemblance is not sufficient for electronic compatibility. |
| Vehicles with a different connector or metal mounting bracket | The physical configuration must agree with the photographed item. |
| Different keyless / smart-entry specification where the receiver code differs | Electrical specification can vary by equipment level. |
| A vehicle selected only because it falls within 2014–2021 | Year range alone cannot confirm an electronic module. |
FITTING GUIDE & REQUIRED TOOLS
Planning estimate for a straightforward like-for-like receiver replacement: approximately 0.75 labour hour / 45 minutes. This is an estimating aid rather than an official workshop book time; trim access, corrosion, diagnosis or synchronisation may increase the total.
ESTIMATED GARAGE LABOUR MATRIX
Based on the planning estimate of 0.75 hour. Parts, diagnostics, programming/synchronisation, seized fittings, trim repairs and VAT treatment of a third-party garage's invoice are not included.
| Estimated Time | £40 / hr | £60 / hr | £80 / hr | £100 / hr |
|---|---|---|---|---|
| 0.75 hr / 45 min | £30 | £45 | £60 | £75 |
PACKING, DELIVERY & INTERNATIONAL SHIPPING
Buyer pays the calculated shipping fee displayed by eBay at checkout. Postage is not included in the item price unless the live eBay postage settings expressly state otherwise.
Where this item and destination are eligible and the listing is enrolled in eBay's Global Shipping Programme, international tracked delivery can be available to supported European destinations, the USA, Australia, Canada and other eligible markets. Charges and availability are calculated by eBay at checkout.
VAT, RETURNS & BUYER PROTECTION
For eligible used goods sold under the applicable Global Accounting VAT Margin Scheme, VAT is accounted for within the margin and is not separately itemised. No separately reclaimable VAT amount is shown to the buyer on a qualifying margin-scheme invoice.
Compare your original unit with every photograph and check 89740-0H040, R-0313118, E1087572, receiver code, connector layout and bracket. If any of these differs, ask through eBay Messages before purchasing.
How to Find Us / Customer Support
For pre-sale fitment questions and order support, please contact THEPARTPILOT through eBay Messages. Our complete legal business contact details are displayed by eBay in the Business Seller Information / Business Details area associated with our business account.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Choosing a quality pre-owned automotive component helps extend the useful life of materials already manufactured, reduces unnecessary parts waste and can reduce the demand for energy and resources associated with producing another replacement from scratch. 🚗🔧 By giving a serviceable component another life, you are supporting more circular automotive reuse while also supporting a local UK small business. Thank you for choosing THEPARTPILOT. 📦♻️