Citroen C3 MK2 SC 2010-2013 10-13 Rear Right Door Check Strap Stay 9181Q5
Citroën C3 MK2 SC 2010-2013 10-13 Rear Right Door Check Strap / Door Stay
Part Identification
Please match the vehicle, installation position, physical shape and identifying markings against your original component before purchase.
Actual Part Photographs
These images are taken from the source listing and should be treated as a primary visual matching reference.
Exact Vehicle Generation Reference
Verified Compatibility Guide
The source vehicle-compatibility data identifies the following petrol C3 II applications. This table intentionally does not expand into engines or variants that have not been verified.
| Year | Vehicle / Chassis | Engine | Power | Engine Codes | Drive |
|---|---|---|---|---|---|
| 2010 | Citroën C3 II SC_ | 1.1 i Petrol / 1124 cc | 44 kW / 60 HP | HFV (TU1A); HFX (TU1A) | FWD |
| 2010 | Citroën C3 II SC_ | 1.4 Petrol / 1360 cc | 54 kW / 73 HP | K6E (TU3A); KFT (TU3A); KFT (TU3AE5) | FWD |
| 2011 | Citroën C3 II SC_ | 1.1 i Petrol / 1124 cc | 44 kW / 60 HP | HFV (TU1A); HFX (TU1A) | FWD |
| 2011 | Citroën C3 II SC_ | 1.4 Petrol / 1360 cc | 54 kW / 73 HP | K6E (TU3A); KFT (TU3A); KFT (TU3AE5) | FWD |
| 2012 | Citroën C3 II SC_ | 1.1 i Petrol / 1124 cc | 44 kW / 60 HP | HFV (TU1A); HFX (TU1A) | FWD |
| 2012 | Citroën C3 II SC_ | 1.4 Petrol / 1360 cc | 54 kW / 73 HP | K6E (TU3A); KFT (TU3A); KFT (TU3AE5) | FWD |
| 2013 | Citroën C3 II SC_ | 1.1 i Petrol / 1124 cc | 44 kW / 60 HP | HFV (TU1A); HFX (TU1A) | FWD |
| 2013 | Citroën C3 II SC_ | 1.4 Petrol / 1360 cc | 54 kW / 73 HP | K6E (TU3A); KFT (TU3A); KFT (TU3AE5) | FWD |
Will Not Fit / Do Not Assume Compatibility
⚠ Similar-looking does not mean interchangeable
Do not assume fitment to Citroën C3 I / first-generation vehicles.
Do not assume fitment to C3 Pluriel or C3 Picasso.
Do not assume fitment to later C3 III vehicles.
Do not buy this listing for a front door. The advertised position is rear right.
No diesel compatibility is claimed because diesel applications are not present in the source compatibility table.
Later-2013 / facelift vehicles require physical and build-date confirmation.
Even if another rear-door component appears visually similar, compare the fixing points, arm geometry, travel and identifying marks before ordering.
What This Part Actually Does
Controls Door Travel
The check strap mechanically limits how far the rear-right door opens, helping prevent uncontrolled over-travel.
THEPARTPILOTCreates Hold-Open Positions
Its detent action provides resistance and defined holding positions as the door is opened.
THEPARTPILOTProtects Surrounding Structure
Correct door-travel control reduces unnecessary shock loading and over-extension around the hinge and body check-mounting area.
THEPARTPILOTThis component does not operate the door lock, central locking system, window motor or electrical controls. Its purpose is mechanical door movement, restraint and hold-open behaviour.
Technical Mounting Reference
LEADING-EDGE MOUNT
DOOR-APERTURE MOUNT
Static technical location guide only. Actual fixing position and orientation must be matched against the vehicle and removed component.
Why Choose A Factory-Origin Component?
Designed around the vehicle's original geometry
A factory-origin component was produced around the intended mounting geometry, opening travel, detent positions and body/door interface of the vehicle.
Lower-cost pattern alternatives can vary in manufacturing tolerance, material thickness, coating, detent feel and dimensional accuracy. For a mechanical part that is repeatedly loaded every time the door is opened, correct geometry and alignment matter.
Choosing a serviceable recycled factory component can therefore offer a strong balance of original-fit geometry, value and environmental responsibility.
25,000+ Parts On The Shelves
With more than 25,000 automotive parts on the shelves, THEPARTPILOT is focused on helping buyers source the correct replacement efficiently. If you are comparing variants, message us through eBay with your vehicle details and the markings from your removed component.
Fitting Guide
Allow roughly 0.5-1.0 hour depending on trim access, fastener condition, corrosion and workshop procedure. This is an estimating guide rather than a guaranteed book time.
| Estimated Time | £40 / hr | £60 / hr | £80 / hr | £100 / hr |
|---|---|---|---|---|
| 0.75 hr / 45 min | £30 | £45 | £60 | £75 |
Professional Fitting Available
Shipping & Secure Dispatch
UK Delivery
Buyers pay the applicable calculated shipping fee shown by eBay at checkout. Please review the delivery service and total cost before paying.
THEPARTPILOTInternational Delivery
Eligible international orders can be handled through the eBay Global Shipping Programme. Available destinations and final charges are determined by eBay at checkout and may include destinations across Europe, the USA, Canada, Australia and other supported regions.
THEPARTPILOT
VAT Margin Scheme
Global Accounting — Second-Hand Goods
Where this item is sold under the Global Accounting VAT Margin Scheme for second-hand goods, VAT is accounted for within the applicable margin and is not shown separately on the sales invoice. No separately stated input VAT is therefore available for the buyer to reclaim.
Returns & Buyer Verification
Fair and compliant return handling
No automatic restocking fee or fixed percentage deduction is applied. Where legally permitted, any refund adjustment is limited to proven diminished value caused by handling beyond what would reasonably be necessary to establish the nature, characteristics and functioning of the item. Your statutory consumer rights are unaffected.
How to Find Us / Customer Support
Need help confirming the correct part?
For pre-sale fitment checks and order support, please contact THEPARTPILOT through eBay Messages.
Our complete registered business details and contact information are shown by eBay in the Business Seller Information / Business Details section of the listing.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.