CITROEN DS3 2009-2015 3DR RIGHT REAR QUARTER WING MOULDING 9687740877
CITROEN DS3 2009-2015 3DR RIGHT REAR QUARTER WING MOULDING 9687740877
A manufacturer-produced exterior body moulding for the right-hand rear quarter of the first-generation Citroen DS3 3-door hatchback. It forms the short trim section behind the door, helping complete the side styling line and protect the quarter-panel edge.
Actual Part Photographs
 Actual item – visible grey/chrome outer face. Cosmetic marks should be assessed from the photographs.
|
 Actual item – reverse face, moulded ABS marking, locating studs and adhesive residue visible.
|
 Additional reverse/detail photograph for fixing-point and shape comparison.
|
|
Item Details & Verified References
| Vehicle MakeCitroen | Vehicle ModelDS3, first-generation body |
| Body Style3-door hatchback | Model / Chassis CodeSA / A55 family |
| Fitment Years2009-2015 conservative listing range | PlacementRight rear quarter / rear wing, behind the door |
| SideRight / UK driver's side | Colour / FinishGrey chrome appearance – compare photographs |
| MaterialMoulded ABS-type plastic with decorative outer finish | ConditionPreviously fitted; expect age-related cosmetic marks |
| IncludedMoulding shown only; reuse or replace clips, nuts and bonding tape as required | Warranty30 days |
| eBay Item Number147479020738 | Stock StatusShelf-stocked by ThePartPilot |
| Reference Type | Number | How to Use It |
|---|---|---|
| Visible mould / engineering reference | C0174Y10 | Visible on the item photographs; compare directly with your removed trim. |
| Primary cross-reference | 9687740877 | Use as the main catalogue and search reference. |
| Interchange Part Number | 8546AP | Cross-reference associated with this right-rear grey/chrome 3-door moulding. |
| Superseded Part Number | 98000693VD | Later service reference associated with the same number family. |
Where It Fits on the Vehicle
 Correct-generation 3-door DS3 reference. The trim sits on the RIGHT rear quarter, immediately behind the long front door and beside the rear wheel-arch area.
|
 Front reference of the same first-generation 3-door body family. Vehicle photographs are for identification only; the car is not included.
|
Parts Compatibility Chart
| Vehicle | Years | Body / Side | Status |
|---|---|---|---|
| Citroen DS3, first-generation SA/A55 family | 2009-2015 | 3-door hatchback, right rear quarter, matching grey/chrome finish | CONFIRMED LISTING RANGE |
| Citroen DS3 Cabriolet | 2013-2015 | Right rear quarter only where 9687740877 / 8546AP / 98000693VD and the physical shape all match | NUMBER + SHAPE CHECK REQUIRED |
| DS-branded facelift DS 3 / later registration | 2016 onward | Do not order by year or model name alone | VERIFY BEFORE ORDERING |
Existing eBay catalogue variants within the main range
| Fuel / Engine Description | Engine Code | Years Shown in Current Compatibility Data |
|---|---|---|
| 1.6 HDi 90, 1560cc, 92 hp | 9HP / DV6DTED | 2009-2015 |
| 1.6 HDi 110, 1560cc, 112 hp | 9HR / DV6C | 2009-2015 |
| 1.4 VTi 98, 1397cc, 98 hp | 8FR / EP3C | 2010-2015 shown in the current table |
This body moulding is not controlled by engine size. The engine rows reproduce the present eBay catalogue coverage; the decisive checks are body style, side, shape, finish, fixings and matching reference numbers.
Fault Symptoms & Reasons to Replace
| Symptom | What It May Indicate |
|---|---|
| Trim lifts away from the quarter panel | Failed bonding tape, loose retaining hardware or distorted ABS backing. |
| Rattle or wind noise around the rear side panel | Broken locating stud, missing clip or an edge no longer seated against the body. |
| Cracks, deep scrapes or missing finish | Impact or age-related damage affecting appearance and edge protection. |
| Water, grit or dirt collecting behind the moulding | Loose fitment or failed perimeter foam/tape allowing contamination behind the part. |
| Uneven panel gap behind the door | Incorrect, warped or poorly matched replacement trim. |
Why a manufacturer-produced recycled part is often the better choice
It was formed for the vehicle's original body curvature and uses the intended stud positions, edge profile and panel-gap geometry. A low-cost pattern copy may require modification, may sit proud of the body or may use a visibly different finish. A checked recycled part can also cost substantially less than buying the equivalent new service component, while keeping a usable part in circulation.
Fitting Guide
Suggested tools and consumables
Plastic exterior trim tools; interior trim clip tool; small ratchet with an 8 mm and 10 mm socket available; low-temperature heat source; masking tape; adhesive remover suitable for automotive paint; isopropyl-alcohol panel cleaner; lint-free cloth; replacement automotive-grade moulding tape or foam seal; suitable replacement retaining nuts/clips; gloves and eye protection.
Estimated repair time and labour guide
Typical professional fitting allowance: 0.5 to 1.0 labour hour, depending on interior access, old adhesive and the condition of the fixings.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 per hour | £25.00 | £37.50 | £50.00 |
| £75 per hour | £37.50 | £56.25 | £75.00 |
| £100 per hour | £50.00 | £75.00 | £100.00 |
| £125 per hour | £62.50 | £93.75 | £125.00 |
Calculation: hourly rate × estimated hours. Figures are examples only and exclude clips, tape, paint correction, VAT where applicable and any additional work discovered during removal. A fitting service may be available subject to workshop capacity; enquire through eBay Messages before travelling.
Condition & Purchase Notes
This is a previously fitted body-trim component. Expect normal storage and age-related marks. Study every actual-item photograph at full size. The photographs form an important part of the condition description and show the supplied colour, face, reverse and fixings.
Delivery, International Orders & Returns
Delivery address
Please make sure the delivery address shown at eBay checkout is complete and correct before payment. For seller and buyer protection, we cannot change the address after checkout; an incorrect order may need to be cancelled and placed again.
International delivery
International delivery may be offered through eBay's Global Shipping Programme. Eligible destinations, postage charges, delivery estimates, import taxes and customs costs are determined by eBay and displayed at checkout for the buyer's address. Availability can vary by item and destination.
Returns
Returns are handled in accordance with the return terms shown on the eBay order and applicable consumer law. The item should be returned in the same condition in which it was supplied. Any permitted deduction for loss in value is applied only where allowed by eBay rules and the law. Your statutory rights are not affected.
Stock, Workshop & Dispatch
 ThePartPilot carries more than 25,000 parts in stock at any one time. Image is an illustrative stock-parts reference, not a photograph of our premises.
|
 Organised shelf storage supports faster identification and dispatch. Illustrative warehouse image.
|
 Fitting and repair work may be available subject to technician and workshop capacity. Illustrative garage image.
|
 Professional assistance can reduce damage to clips, paint and trim. Illustrative mechanic image.
|
 Parts are prepared for transport using packaging appropriate to their size and fragility. Illustrative packaging image; actual packing method varies.
|
|
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.