Citroen DS3 2009-2016 DS 3 2018 Centre Console Tunnel Trim 98015784 98015784ZD
Citroen DS3 2009-2016 DS 3 2018 Centre Console Tunnel Trim 98015784 98015784ZD
Citroen DS3 / DS 3 Centre Console Tunnel Trim
Seller-listed part reference: 98015784 | Common full reference: 98015784ZD
Premium used replacement for the centre floor tunnel area. Exact number, shape, colour, openings and mounting points must match your original part.
Actual Item Photographs
The photographs below show the used part supplied with this listing. Please inspect all images for condition, trim finish, openings, clips and mounting points.
Reference Vehicle & Fitting Location
Product Details
Fitment & Compatibility Chart
Compatibility is conditional on an exact match to the complete number on your old part and to the pictured shape, openings, colour, mounting tabs and equipment layout. Model and year alone are not enough.
| Vehicle | Body style | Years | Fitment status / checks required |
|---|---|---|---|
| Citroen DS3 (A55 / SA_) | 3-door hatchback | 2009–2016 | Primary application for this console family. Buy only where 98015784 / 98015784ZD and all visual details match. |
| Citroen DS3 Cabrio | 2-door convertible | 2013 exact-number example; 2014–2016 conditional | A 2013 exact-number application is evidenced. Later years must be treated as conditional because trim and equipment combinations vary. Number-and-photo match is compulsory. |
| DS Automobiles DS 3 | 3-door hatchback | 2018 exact-number example; other 2016–2019 vehicles conditional | A 2018 exact-number donor application is evidenced. Other model years require a complete number and physical-layout match before ordering. |
| Citroen C3 II (A51 / SC_) | 5-door hatchback | 2010 and 2012–2016 exact-number records found | Cross-reference stock records show this number on some C3 II vehicles in these years. Not all C3 II console layouts are the same; exact number and image match required. 2009 and 2011 are not claimed from the records checked. |
Known Non-Fit / Do Not Assume Compatibility
| Will not fit / not confirmed | Reason |
|---|---|
| Citroen C3 I / Pluriel, Citroen C3 III, DS 4, DS 5, Citroen C4 or Peugeot models | Different platform, console shape or mounting layout unless a manufacturer catalogue proves otherwise. |
| Any vehicle carrying a different full reference, including 98015785ZD or another suffix | A similar-looking number can identify a different colour, opening, equipment or moulding variant. |
| Different automatic/manual, armrest, storage, socket or trim arrangement | Console openings and mounting points can vary by equipment specification. |
| Left-hand-drive application | Not independently confirmed. International buyers must compare every detail and the complete number. |
| Any part with broken/missing mounting points in a different location from the item pictured | Physical fit cannot be guaranteed where the original moulding differs. |
How to Verify Fitment Before Buying
- Find the moulded or printed number on the underside of your existing console. Match the complete number, including letters such as the ZD suffix.
- Compare the overall length and contour against every actual item photo.
- Check every opening for the gear surround, handbrake, storage trays, sockets, switches and armrest arrangement.
- Compare mounting tabs, screw holes and clip positions. A single different fixing point can prevent correct installation.
- Confirm colour and surface texture. Interior trim codes can differ even where the base moulding looks similar.
- Send your VIN, old-part number and clear photos through eBay Messages if any detail is uncertain. We can check before dispatch.
Symptoms of a Damaged Centre Console
Loose or Moving Trim
Broken tabs or screw points can allow the console to lift, shift or move during driving.
Rattles & Squeaks
Cracks, missing clips or distorted mounting points can cause vibration and noise over uneven roads.
Visible Cracks or Gaps
A damaged moulding may leave uneven gaps around the gear lever, handbrake, storage areas or adjoining trim.
Poor Support for Inserts
Surrounding trays, switch panels, sockets or armrest sections may not sit securely where their supporting console is damaged.
Why Choose an Original Factory-Fit Used Part?
- Correct factory dimensions: designed for the vehicle's original mounting points, adjoining panels and interior finish.
- Better material and surface match: a used factory-fit moulding is more likely to match the original grain, rigidity and colour than a low-cost copy.
- Reduced installation problems: correct clip locations and contours help avoid loose trim, gaps and repeated labour.
- Strong value: used vehicle parts can cost up to 70% less than an equivalent new dealer-priced component, although the actual saving varies by part and availability.
- Lower environmental impact: reusing a serviceable component keeps material in circulation and reduces demand for new manufacturing.
Fitting Guide, Tools & Estimated Time
Typical Tools
- Plastic interior trim removal tools
- Torx T20 and T25 drivers; some specifications may use additional sizes
- 10 mm socket, extension and ratchet where applicable
- Small trim pick, torch, gloves and a magnetic parts tray
- Protective cloths or low-tack tape for adjacent panels
General Removal & Installation Procedure
- Park safely, select the correct gear / park position, apply the handbrake and remove the key. Protect surrounding trim.
- Move both front seats as required and remove loose storage inserts, mats or covers obstructing the console.
- Use plastic tools to release the gear-surround, gaiter, rear storage or armrest trim as fitted. Do not lever against soft visible surfaces.
- Locate and remove all console screws / bolts from the front, sides, storage areas and rear section. Keep fixings organised.
- If electrical sockets or switches are attached, follow the correct battery-isolation procedure before disconnecting plugs. Never pull on wiring.
- Lift and manoeuvre the console carefully over the gear-lever and handbrake area without forcing clips or cables.
- Transfer only the clips, inserts or brackets required from the old console. Replace damaged fasteners rather than forcing them.
- Test-fit the replacement, confirm all plugs and cables are correctly routed, then refit fasteners evenly. Do not overtighten plastic mounting points.
- Reassemble removed trim, test any disconnected sockets / switches and confirm the console is secure with no trapped wiring or abnormal movement.
Static Garage Labour Cost Calculator
Because active code is not used in eBay descriptions, this safe calculator uses a fixed labour range. Formula: hourly rate × 0.75 to 1.50 hours. Parts, VAT, diagnostics and additional repairs are not included.
| Garage hourly rate | 0.75 hour estimate | 1.50 hour estimate |
|---|---|---|
| £50 / hour | £37.50 | £75.00 |
| £70 / hour | £52.50 | £105.00 |
| £90 / hour | £67.50 | £135.00 |
| £110 / hour | £82.50 | £165.00 |
| £130 / hour | £97.50 | £195.00 |
Stock, Workshop & Dispatch
Delivery, International Shipping & Collections
UK & International Delivery
International delivery is available through eBay's managed shipping programme wherever it is offered at checkout. Eligibility, import charges, delivery service and final destination availability are controlled by eBay and may change. The checkout result for this item always takes priority.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden; Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
Collections
Collection is available by prior appointment, seven days a week until 8 pm, including bank holidays where arranged in advance. Please book through eBay Messages and wait for confirmation before travelling.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
VAT, Returns & Buyer Protection
VAT Margin / Global Accounting
Where applicable, this used item is sold under the VAT margin / global accounting scheme. VAT is not stated separately on the sale and a separate VAT amount cannot be reclaimed from the item price.
Returns
Returns are handled under the return terms shown in the eBay listing and applicable consumer law. No automatic restocking fee is applied simply because a buyer selects a particular return reason.
Where eBay's seller-protection rules permit, a deduction of up to 50% may be made only to reflect an actual loss in value caused by use, damage, missing parts, alteration or inadequate return packaging. Rights relating to faulty, damaged or incorrectly described goods are not restricted.
Support a Small Business & Reuse Vehicle Parts
Thank you for supporting an independent vehicle-parts business. Every serviceable component reused helps extend the useful life of an existing part, reduces waste and can lower the demand for energy and raw materials needed to manufacture a replacement. 🌍♻️🚗
Our team photographs, stores, checks, picks and packs used parts every day. Buying carefully matched used parts supports skilled local jobs while helping keep recoverable components in use rather than in the waste stream.