DAIHATSU TREVIS L651 L652 2006 FRONT LEFT PASSENGER SEAT BELT BUCKLE E034501
DAIHATSU TREVIS L651 L652 2006 FRONT LEFT PASSENGER SEAT BELT BUCKLE E034501
DAIHATSU TREVIS 2006 FRONT LEFT PASSENGER SEAT BELT BUCKLE / STALK
| Vehicle Make | Daihatsu |
| Model | Trevis |
| European Frame | L651 family — verify against VIN/chassis |
| Confirmed Year | 2006 |
| Body Style | 5-door hatchback |
| Engine Family | 1.0 petrol / EJ-VE application associated with Trevis |
| Part | Front seat belt buckle / inner buckle stalk |
| Placement | Front Left / Near Side Front / UK Passenger Side |
| Visible Marking | E034501 |
| Interchange Part Number | No unique interchange number confirmed from the photographs |
| Superseded Part Number | No confirmed superseded number verified |
| Unique Manufacturer Number | Not visible in the supplied listing photographs |
| Condition | Recycled vehicle part supplied as photographed; cosmetic marks consistent with previous installation may be present. |
|
✓ FRONT LEFT UK PASSENGER SIDE THIS BUCKLE LOCATION |
FRONT RIGHT UK DRIVER SIDE NOT THIS LOCATION |
|
REAR LEFT NOT THIS PART |
REAR RIGHT NOT THIS PART |
| Vehicle | Year | Position | Status |
|---|---|---|---|
| Daihatsu Trevis 1.0 | 2006 | Front Left / UK Passenger | ✓ Best-supported match |
| Daihatsu Trevis | 2007–2011 | Front Left | ⚠ Verify first — not automatically claimed |
| Toyota Prius MK2 / XW20 | 2004–2009 | Any | ✕ NOT CONFIRMED |
| Toyota Prius MK3 / XW30 | 2009 onward generation | Any | ✕ NOT THIS 2006-MARKED APPLICATION |
| Other Toyota / Citroën / Peugeot models carrying E034501 markings | Various | Various | ✕ DO NOT ASSUME FITMENT FROM E034501 |
| Other Daihatsu models | Various | Various | ⚠ Not confirmed from present evidence |
✓ Vehicle year
✓ Front-left / passenger-side position
✓ Buckle housing shape
✓ Stalk length and angle
✓ Mounting-eye size and orientation
✓ Release-button shape and colour
✓ Electrical connector, if your original has one
✓ All numbers and markings visible on your old part
The front seat-belt buckle receives and mechanically locks the metal tongue attached to the seat belt. It forms a critical part of the vehicle's occupant restraint system.
When operating correctly, the tongue should enter positively, lock securely, remain retained when pulled and release only when the red release button is pressed.
Some vehicle variants use a buckle-mounted electrical switch for the seat-belt warning system. The photographs of this particular part do not clearly establish an external electrical lead, so please compare your existing buckle before ordering.
• Release button sticks or fails to return correctly
• Buckle intermittently releases or will not hold the tongue
• Excessive movement, distortion or damage around the mounting point
• Cracked or badly damaged outer casing
• Seat-belt warning remains active when fastened, where a buckle switch is fitted
• Intermittent seat-belt warning/chime, where electrically monitored
• Physical damage following an accident or heavy loading
Visible construction includes a moulded polymer buckle housing and release button, an internal metal locking mechanism and a steel mounting/stalk section terminating in a bolted mounting eye.
Exact internal material grades and engineering specifications are not claimed because these are not visible from the part and no manufacturer engineering drawing has been supplied.
A correctly matched recycled manufacturer-fit component preserves the original mounting geometry, dimensions and vehicle-specific design used on the donor vehicle. This can make it an attractive alternative to an unverified low-cost replacement.
Recycled automotive components can also provide substantial savings compared with purchasing a brand-new replacement. The exact saving varies according to the part, vehicle and current new-part price, so buyers should compare current prices rather than relying on a fixed percentage saving.
Most importantly, matching matters more than the brand name alone. Always compare your original component before purchase.
2. Before dismantling anything, compare the replacement buckle with the existing buckle for shape, length, mounting eye, orientation and electrical connections.
3. Move the front-left seat as required to gain access to the inner buckle mounting area. Remove only the necessary seat-base or mounting trim.
4. If your original buckle includes electrical wiring or a restraint-system connection, follow the correct vehicle-specific battery/SRS isolation procedure before disconnecting it.
5. Remove the original buckle mounting fastener while supporting the buckle/stalk.
6. Install the replacement in exactly the same orientation. Do not improvise with additional washers, spacers or substitute fasteners.
7. Tighten the safety-belt anchorage to the correct vehicle-specific workshop specification. No guessed torque figure is supplied here.
8. Reconnect any applicable electrical connector and refit removed trim.
9. Test the buckle repeatedly. Confirm positive engagement, secure retention under a firm pull and correct release-button operation.
10. Where the vehicle monitors buckle status, confirm the seat-belt warning system operates correctly and that no relevant warning remains illuminated.
• Extension bar where required for access
• Correctly calibrated torque wrench
• Plastic trim removal tool
• Inspection lamp
• Suitable battery-terminal tool only where electrical/SRS isolation is required
• Vehicle-specific workshop information for final torque/procedure
Planning estimate: approximately 0.5 hour where the mounting bolt is directly accessible, potentially up to approximately 1.0 hour where additional seat, trim or electrical access is necessary.
This is a general planning estimate rather than a manufacturer flat-rate time. Corrosion, previous repairs, damaged fasteners and vehicle configuration can alter labour time.
| Garage Rate | 30 Minutes | 45 Minutes | 60 Minutes |
|---|---|---|---|
| £50/hour | £25 | £37.50 | £50 |
| £60/hour | £30 | £45 | £60 |
| £70/hour | £35 | £52.50 | £70 |
| £80/hour | £40 | £60 | £80 |
| £90/hour | £45 | £67.50 | £90 |
| £100/hour | £50 | £75 | £100 |
| £120/hour | £60 | £90 | £120 |
| £150/hour | £75 | £112.50 | £150 |
We may also be able to assist with fitting subject to workshop availability. Please enquire through eBay Messages before making arrangements.
International orders may be available through eBay's international / Global Shipping services where the item and destination are eligible.
Available destinations, delivery charges, import charges and delivery estimates are determined by eBay and displayed to the buyer at checkout.
Please make sure your delivery address shown during eBay checkout is correct before completing payment. We cannot manually substitute a different delivery address onto an existing paid eBay order.
VAT is not shown separately on this item under HMRC VAT Global Accounting (margin scheme). A VAT invoice may be available where applicable.
Detailed fitment information is supplied to help customers select the correct part before purchase. If you are unsure, please contact us through eBay Messages before fitting the item.
Returned parts should be returned in the same condition in which they were received, with all supplied components included and suitably packaged.
Where permitted by eBay policy, a refund deduction may apply if a returned item has suffered an actual loss in value because it has been installed, altered, damaged, returned incomplete or handled beyond what was necessary to inspect it. Any such deduction is subject to eBay's applicable returns rules.
THEPARTPILOT stocks more than 25,000 vehicle parts at any one time, helping customers keep vehicles on the road without automatically resorting to brand-new replacement components.
|
🔍 IDENTIFIED Part references and fitment checked where evidence is available |
📦 PACKED Protected for handling and transport |
🚚 DISPATCHED Prepared against the eBay order details |
Thank you for supporting THEPARTPILOT. Every suitable vehicle component that can be responsibly reused represents one less serviceable part being discarded unnecessarily.
Choosing recycled vehicle parts can extend the useful life of existing components, reduce demand for replacement manufacturing and help keep repairable vehicles on the road. 🌍♻️🚗
Your purchase helps support a specialist independent automotive parts business while giving a serviceable component another working life.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Confirm that you require a DAIHATSU TREVIS FRONT-LEFT / UK PASSENGER-SIDE SEAT-BELT BUCKLE and compare your original buckle directly with the photographs.
DO NOT PURCHASE SOLELY BECAUSE YOUR OLD BUCKLE ALSO SHOWS “E034501”.
If uncertain, contact THEPARTPILOT through eBay Messages before ordering. Helping you identify the correct part first time helps avoid unnecessary returns, extra transport and vehicle downtime.