Fiat 500 312 2007-2015 Fuel Filler Flap Door Cover White Rear Right 51785379 3Dr

Fiat 500 312 2007-2015 Fuel Filler Flap Door Cover White Rear Right 51785379 3Dr

£21.96
Skip to product information
Fiat 500 312 2007-2015 Fuel Filler Flap Door Cover White Rear Right 51785379 3Dr

Fiat 500 312 2007-2015 Fuel Filler Flap Door Cover White Rear Right 51785379 3Dr

£21.96
THEPARTPILOT
Used Vehicle Parts • Professional Fitment Information • 25,000+ Parts In Stock
UK Business Seller Tracked Dispatch Fitment Help Available
Used Original-Fit Manufacturer Part

Fiat 500 Type 312 Fuel Filler Flap Door Cover

White • Rear Right / UK Offside • 3-Door • 2007–2015
IMPORTANT FITMENT NOTICE:
Compare the shape, hinge carrier, mounting points, colour and moulded markings shown in the actual photographs before ordering. Do not rely only on eBay's automated compatibility information.

Actual Item Photographs

These photographs show the used component included in this sale. Please inspect every image carefully.

Actual Fiat 500 312 white fuel filler flap door and hinge carrier
THEPARTPILOT
Fiat 500 fuel flap rear carrier showing Fiat 312 and PA66 GF30 markings
THEPARTPILOT
Used white Fiat 500 fuel flap exterior face
THEPARTPILOT
Fiat 500 white fuel door cover condition photograph
THEPARTPILOT
Used-part condition: visible storage and road-use marks, scratches, paint wear and a small surface crease/ding may be present. The exact paint code has not been confirmed. Painting, polishing or cosmetic preparation may be required for a perfect colour match.

Reference Vehicle & Fitting Location

The flap is mounted on the right rear quarter panel, also called the UK offside rear, beside the fuel filler neck and above the rear wheel area. These are reference vehicles only and are not the donor vehicle.

2010 Fiat 500 three-door rear right reference view showing fuel flap location
2010 Fiat 500 3-Door — Rear/Right Fitting Area
2011 Fiat 500 three-door rear view reference photograph
2011 Fiat 500 3-Door — Reference Body Style

Reference photographs: Vauxford, CC BY-SA 4.0, Wikimedia Commons. Images shown unchanged.

Product Specification

Part type Fuel filler flap / fuel door exterior cover with hinge carrier
Vehicle family Fiat 500 Type 312
Confirmed listing years 2007–2015
Body style 3-door hatchback
Placement Rear right / UK offside rear quarter panel
Colour White or light painted finish — exact paint code not verified
Visible markings FIAT / 312 / PA66-GF30
Material information Black carrier marked PA66-GF30: glass-fibre-reinforced polyamide 66. Outer painted-lid material not independently verified.
Catalogue cross-reference 51785379 — catalogue reference only; complete number is not visible in the supplied photographs
Condition Used — cosmetic wear and marks are visible
Included The component shown in the actual item photographs only
Not automatically included Fuel cap, lock, tether, body trim, screws or additional fixings unless clearly photographed

Vehicle Compatibility Chart

Green rows identify the principal visual application. Amber rows require the old part or catalogue number to be matched before purchase.

Vehicle Years Body Fitment status
Fiat 500 Type 312 2007–2015 3-door hatchback Primary application — compare hinge, shape and right-side mounting
Fiat 500 Type 312 2016 3-door hatchback Possible catalogue continuation — confirm 51785379 and photographs first
Fiat 500C Type 312 2009–2015 Convertible Shared catalogue references exist — old-part or VIN confirmation required
Abarth 500 / 595 / 695 Type 312 2008–2015 3-door hatchback Confirm 51785379, hinge design and colour before purchase

This Part Is Not Listed To Fit

Fiat 500L Different larger five-door vehicle platform
Fiat 500X Different crossover body and fuel-door assembly
New electric Fiat 500 Type 332 Different electric vehicle and charging-port arrangement
Classic Fiat 500 1957–1975 classic vehicle — completely different design
Five-door vehicles Do not assume compatibility from the Fiat 500 name alone
Left-side fuel-door applications This item is identified for the vehicle's right rear side

How To Confirm Fitment Before Ordering

1. Confirm your vehicle is a Fiat 500 Type 312 three-door model within the stated year range.
2. Confirm the fuel flap is positioned on the vehicle's right rear / UK offside quarter.
3. Compare the old flap's circular shape, hinge carrier, clips and mounting points with the actual photographs.
4. Check for FIAT, 312 and PA66-GF30 moulded markings where present.
5. Where available, compare the donor or old-part reference with catalogue cross-reference 51785379.
6. For assistance, send the registration, VIN and a clear photograph of the old component through eBay Messages before purchasing.

Where It Fits & What It Does

This exterior flap sits over the fuel-filler recess in the right rear quarter panel. It covers the fuel-cap area, helps shield the filler recess from dirt and weather, and restores the smooth exterior body finish when closed.

The flap itself does not meter fuel or operate the engine-management system. Its function is primarily protective, cosmetic and mechanical through the hinge and closure arrangement.

Common Symptoms Of A Faulty Fuel Flap

  • Broken, cracked or detached hinge carrier
  • Flap hangs down, rattles or does not sit flush with the quarter panel
  • Flap will not open or close smoothly
  • Missing exterior cover exposing the fuel-cap recess
  • Damaged mounting clips, pivot or retaining points
  • Severe scratches, dents, corrosion or paint damage
  • Water, road dirt or debris entering the filler recess more easily

Why Choose A Correctly Matched Used Manufacturer Part?

A correctly matched manufacturer-produced component was designed around the original vehicle's body aperture, hinge geometry and panel gaps. This can offer a more predictable fit than a poorly made low-cost pattern replacement.

Purchasing used can also provide a substantial saving against a new dealer-supplied component. Depending on the part and current retail price, selected used vehicle components may cost up to 70% less or more than buying new. Actual savings vary, so compare current prices before purchase.

Because this is a painted used body component, always budget for possible polishing, preparation or repainting where an exact cosmetic match is important.

Fitting Guide

General guidance only. Fasteners and access arrangements can differ by production date. Use appropriate workshop information and seek professional assistance when unsure.

Suggested Tools

  • Plastic trim-removal tool
  • Torx T20, T25 and T30 drivers
  • 8 mm and 10 mm socket set
  • Small ratchet and extension
  • Flat-blade screwdriver
  • Masking tape to protect paint
  • Gloves and inspection light
  • Panel-safe cleaner

Estimated Time

15–30 Minutes

Approximately 0.25–0.50 labour hours for an experienced technician, provided no damaged fixings, seized hardware, body damage or paint preparation is encountered.

General Installation Sequence

  1. Park securely, switch the ignition off and keep ignition sources away from the fuel area.
  2. Open the existing flap and protect the surrounding paint with masking tape.
  3. Inspect the hinge, clips and fixing arrangement before removing anything.
  4. Access the retaining screws, clips or nuts through the flap recess or adjacent trim as applicable.
  5. Support the flap while carefully releasing its carrier and fixings.
  6. Compare the removed part directly with the replacement before continuing.
  7. Transfer only reusable trim, tether or small hardware where required and compatible.
  8. Position the replacement loosely and adjust it until the panel gap is even.
  9. Tighten fixings gently; do not overtighten reinforced-plastic mounting points.
  10. Open and close the flap repeatedly and confirm that it sits flush without fouling the bodywork.
Safety: do not drill, grind, weld, smoke or use naked flames near the fuel filler area. Professional fitting is recommended where the quarter panel, filler neck or mounting points are damaged.

Static Garage Labour Cost Calculator

eBay does not permit JavaScript calculators, so use this ready-calculated table. Formula: garage hourly rate multiplied by approximately 0.25–0.50 hours.

Garage Hourly Rate 15-Minute Labour 30-Minute Labour Estimated Range
£50 per hour £12.50 £25.00 £12.50–£25.00
£70 per hour £17.50 £35.00 £17.50–£35.00
£90 per hour £22.50 £45.00 £22.50–£45.00
£120 per hour £30.00 £60.00 £30.00–£60.00

Estimates exclude paintwork, replacement clips, additional repairs, VAT charged by the fitting garage and diagnostic time. Our own fitting service may be available subject to workshop capacity. Enquire through eBay Messages.

Fitting & Repair Support

Illustrative professional motor vehicle repair workshop

Fitting and repair assistance may be available subject to technician, ramp and appointment availability. Please discuss the exact vehicle and required work through eBay Messages before making travel arrangements.

Illustrative licensed stock photograph — not represented as a photograph of our premises.

25,000+ Parts In Stock

We stock a large range of tested and inspected used components from many vehicle manufacturers. Items are selected, photographed, identified and securely packed before dispatch.

Illustrative vehicle parts warehouse
Extensive Used-Parts Inventory
Illustrative boxed parcels prepared for tracked dispatch
Securely Boxed & Prepared For Dispatch

Illustrative licensed stock photographs — not represented as photographs of our premises or exact stock.

UK & International Delivery

Qualifying orders placed before 3pm are prepared for prompt tracked dispatch. Delivery charges and available services are displayed separately by eBay during checkout. No free-postage promise is made in this description.

International delivery is offered through eBay's Global Shipping Programme for eligible items and destinations. eBay calculates international postage, import charges, taxes, customs processing and estimated delivery at checkout.

Current eBay GSP destination list, subject to item eligibility and checkout availability:

EU: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Non-EU: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
Checkout address warning: customers must ensure that the complete delivery address is correct before payment. Sellers cannot manually redirect an order to a different address after checkout.

VAT Information

Sold under the Global Accounting VAT margin scheme where the transaction qualifies. VAT is not shown separately on the sales invoice and is not recoverable separately as input tax.

Returns & Buyer Protection

The listing currently provides a 30-day return period and 30-day seller warranty. Returns are administered through eBay and do not affect the buyer's statutory rights.

Before fitting, painting, modifying or transferring parts, compare the supplied component with the original. A returned component should be protected, securely packaged and returned in the condition received.

No automatic fixed restocking percentage is imposed. Where legally permitted, a deduction may only reflect actual diminished value caused by fitting, modification, damage, missing components or handling beyond what was reasonably necessary to inspect and confirm the item's nature and compatibility.

Incorrect-fitment prevention: send your registration, VIN, existing part number and a photograph of your old flap through eBay Messages before ordering whenever any detail is uncertain.

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
      
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.  

♻️ Support A Local Independent Business

Every purchase supports an independent UK vehicle-parts business, local employment and the continued recovery of serviceable components from donor vehicles.

Reusing a correctly matched component helps extend the useful life of an existing part, reduces avoidable waste and can reduce demand for the materials, energy and transport required to manufacture a brand-new replacement. Thank you for choosing reuse where it is safe and suitable. 🌍🔧🚗

THEPARTPILOT

More than 25,000 used vehicle parts in stock • Worldwide delivery on eligible eBay orders • Fitment assistance and fitting service subject to availability

Vehicle and workshop images are reference or illustrative images. Actual item photographs identify the component sold. Model names and part references are used solely to describe compatibility.

THEPARTPILOT • LISTING CONTENT PROTECTED

You may also like