Fiat Idea 2003-2012 NSF Front Left Door Handle Window Switch 735421044 5 Door
£19.89
Skip to product information
Fiat Idea 2003-2012 NSF Front Left Door Handle Window Switch 735421044 5 Door
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
25,000+ PARTS
REPAIR SERVICE
CAREFUL DISPATCH
Fiat Idea 2003-2012 NSF Front Left Door Handle Window Switch 735421044 5 Door
£19.89
Used Original Vehicle Parts • UK Stock
THEPARTPILOT
Fiat Idea 2003-2012 NSF Front Left Door Handle Window Switch 735421044 • 5 Door
Front-left interior door pull/handle trim with single electric-window switch. Please match the part number, connector, switch count, trim shape and colour to your original part before ordering.
✓ EXACT ITEM PHOTOGRAPHED
✓ 30-DAY LISTING WARRANTY
✓ 25,000+ PARTS HELD
✓ FITTING SUBJECT TO AVAILABILITY
IMPORTANT PART-NUMBER CHECK: This listing is for the front-left / LH (UK passenger-side / NSF; left-hand-drive driver side) assembly associated with part number 735421044. Do not order using year alone. The opposite front-right assembly is different and is commonly referenced as 735421049.
Buyer fitment check: Compare every photograph with the part currently fitted to your vehicle. Confirm one window rocker switch, the same electrical connector, the same clip layout, the silver pull-handle style and the same black trim finish. Send your registration or VIN through eBay messages before purchase if you need a visual compatibility check.
Exact Item Photographs
THEPARTPILOT
Front view of the exact used assembly supplied.
THEPARTPILOT
Single-switch layout and silver interior pull-handle finish.
THEPARTPILOT
Reverse view. Donor marking shown in the listing photographs: Fiat Idea 2006 NSF.
THEPARTPILOT
Moulded identification visible on the item, including A739 and PA6-GF15 material marking.
Used-part condition: cosmetic marks, light scratches and signs of previous use may be present. The photographs form part of the description; inspect them at full size before purchase.
Vehicle and Fitting Location
↑ FITS INSIDE THE FRONT-LEFT / LH DOOR
UK PASSENGER / NSF • LHD DRIVER SIDE
UK PASSENGER / NSF • LHD DRIVER SIDE
Vehicle reference photograph: 2006 Fiat Idea, five-door body. Public-domain reference image. The supplied part is fitted inside the front-left door trim; the vehicle itself is not included.
Compatibility When Part Number and Layout Match
| Make | Model / Type | Years | Body | Position | Required Match |
|---|---|---|---|---|---|
| Fiat | Idea / Type 350 | 2003-2012 model range | 5-door MPV | Front Left / LH / UK NSF-passenger side / LHD driver side | Part 735421044, one switch, matching connector, clips, trim shape and finish |
Compatibility is configuration-specific. Model year does not override a different switch count, connector, colour or side. A VIN check can confirm the vehicle, but the existing part number and photographs remain the safest final comparison for this used trim-and-switch assembly. The 2003-2012 range is the Fiat Idea model range, not a year-only fitment guarantee: a VIN-specific Fiat catalogue match for 735421044 across every trim was not available, so order only when the original part, connector and layout match the listing photographs.
Known Part and Moulding References
735421044 — front left assembly
A739 — moulded marking visible
PA6-GF15 — moulded material marking
Do not substitute 735421049: that number is associated with the opposite front-right assembly and should not be treated as an interchangeable number for this front-left item.
This Part Will Not Fit
- ✕ The front-right / RH door (UK driver side).
- ✕ Either rear door.
- ✕ Versions with a different switch count, plug, clip layout, trim colour or handle design.
- ✕ Lancia Musa or another Fiat model unless the buyer independently confirms the identical service number, connector and physical design. No cross-model fitment is claimed here.
- ✕ Any vehicle where the original part is marked 735421049 or is fitted on the opposite side.
What This Part Is and What It Controls
This is the front-left interior door pull/handle trim assembly containing the local electric-window rocker switch. It provides the handhold used to pull the door closed and the passenger-side control used to raise or lower the front-left window. The assembly connects to the vehicle's door wiring through the rear electrical plug.
Location
Inside the front-left door card, around the pull handle and window-switch area.
Inside the front-left door card, around the pull handle and window-switch area.
Controls
Local operation of the front-left electric window, subject to the vehicle's wiring and control system.
Local operation of the front-left electric window, subject to the vehicle's wiring and control system.
Construction
Black moulded polymer carrier, silver-finish pull insert, electrical rocker switch and connector.
Black moulded polymer carrier, silver-finish pull insert, electrical rocker switch and connector.
Symptoms of a Faulty Handle or Window Switch
- Front-left window does not respond from the passenger switch, works only intermittently or requires excessive pressure.
- Rocker switch feels loose, sticks, has lost its click action or sits incorrectly in the trim.
- Door pull is cracked, loose, lifting away from the door card or has broken retaining clips.
- Heat damage, corrosion or looseness is visible at the connector or switch terminals.
- Window operates from the driver's master switch but not from the passenger switch.
Diagnose before ordering: similar symptoms can also be caused by a fuse, broken door-hinge wiring, a damaged connector, window motor, regulator or control module. This replacement should not be used as a substitute for electrical diagnosis.
Why Choose an Original Used Manufacturer Part?
Factory-matched geometry
Correct clip positions, handle contour, switch aperture and connector design are more likely to align with the original door trim than a low-cost generic copy.
Correct clip positions, handle contour, switch aperture and connector design are more likely to align with the original door trim than a low-cost generic copy.
Original look and switch feel
A used factory part preserves the intended shape, texture and operation while avoiding unnecessary manufacture of a new component.
A used factory part preserves the intended shape, texture and operation while avoiding unnecessary manufacture of a new component.
Better value
Used original parts can cost substantially less than a new dealer-supplied assembly. Actual savings depend on current new-part price and availability.
Used original parts can cost substantially less than a new dealer-supplied assembly. Actual savings depend on current new-part price and availability.
Reduced waste
Reusing a serviceable component extends its useful life and reduces demand for new raw materials, packaging and manufacturing.
Reusing a serviceable component extends its useful life and reduces demand for new raw materials, packaging and manufacturing.
Fitting Guide, Tools and Estimated Time
Recommended Tools
- Plastic trim-removal levers
- Torx drivers, commonly T20/T25/T30 depending on trim specification
- 8 mm or 10 mm socket set if door-card removal is required
- Small flat trim pick or screwdriver used with protection
- Torch, gloves and protective tape
- Multimeter for diagnosis, if required
Typical Time
DIY estimate: approximately 30-60 minutes.
Workshop labour allowance: approximately 0.5-1.0 hour.
Difficulty: 2/5 for an experienced DIYer, but trim clips can become brittle with age.
Times are estimates, not a manufacturer flat-rate. Corroded fixings, damaged clips, wiring faults or full door-card removal can increase labour.
General Installation Steps
- Compare the replacement with the original before dismantling. Confirm side, switch count, connector, clips and finish.
- Park safely, switch the ignition off, remove the key and protect the surrounding trim. Retain any radio or vehicle settings needed after battery disconnection.
- Disconnect the negative battery terminal and allow the vehicle electronics to power down. Do not interfere with side-airbag wiring or yellow safety connectors.
- Use a plastic trim tool to release the switch/handle surround carefully. If the panel will not lift without force, locate and remove the correct door-card fasteners using a workshop manual for the exact vehicle.
- Depress the electrical connector lock, unplug the old switch assembly and inspect the plug for bent pins, corrosion, heat damage or broken wiring.
- Connect the replacement, refit all clips and fasteners, reconnect the battery and test the window from both the local switch and the driver's master control.
- Confirm the pull handle is secure, the switch is seated evenly and the door opens, closes and locks normally.
Fitting service available: Professional fitting and wider repair work may be available subject to workshop capacity, vehicle condition and prior appointment. Arrange through eBay messages.
Static Garage Labour Cost Guide
Active calculators require JavaScript, which is not used in this listing. The table below gives the same calculation without active content: hourly rate × labour time.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 per hour | £25.00 | £37.50 | £50.00 |
| £70 per hour | £35.00 | £52.50 | £70.00 |
| £90 per hour | £45.00 | £67.50 | £90.00 |
| £110 per hour | £55.00 | £82.50 | £110.00 |
| £130 per hour | £65.00 | £97.50 | £130.00 |
Illustrative labour only. Diagnosis, consumables, replacement clips, travel, VAT and additional repairs are not included.
Stock, Workshop and Dispatch
25,000+ PARTS
Large ready-stock range
More than 25,000 parts are held on the shelf at any one time.
More than 25,000 parts are held on the shelf at any one time.
REPAIR SERVICE
Workshop support
Fitting and repair services are available subject to availability and prior booking.
Fitting and repair services are available subject to availability and prior booking.
CAREFUL DISPATCH
Protected packing
Orders are prepared for tracked delivery using suitable protective packaging.
Orders are prepared for tracked delivery using suitable protective packaging.
The three business images above are illustrative licensed stock photographs and are not presented as photographs of our actual premises, employees or delivery vehicle.
Delivery, International Shipping and Collections
UK Delivery
Orders are dispatched to the address selected by the buyer at eBay checkout. Please correct the checkout address before payment; we cannot manually redirect an order after purchase.
Orders are dispatched to the address selected by the buyer at eBay checkout. Please correct the checkout address before payment; we cannot manually redirect an order after purchase.
International Delivery
Eligible international destinations, postage, customs charges and import fees are displayed and managed by eBay through the Global Shipping Programme at checkout. Availability varies by destination and item.
Eligible international destinations, postage, customs charges and import fees are displayed and managed by eBay through the Global Shipping Programme at checkout. Availability varies by destination and item.
Collection
Collection can be arranged seven days a week until 8 pm by appointment, including bank holidays by prior arrangement.
Collection can be arranged seven days a week until 8 pm by appointment, including bank holidays by prior arrangement.
How to Arrange Collection
Purchase or contact us through eBay messages, agree a time, and the collection address/instructions will be supplied through eBay's messaging system.
Purchase or contact us through eBay messages, agree a time, and the collection address/instructions will be supplied through eBay's messaging system.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
VAT, Returns and Buyer Responsibilities
VAT margin treatment: Where applicable, this second-hand item is sold under the VAT Margin Scheme / Global Accounting Scheme. VAT is not shown separately and there is no separately reclaimable VAT element.
- Check part number, side, switch count, connector, trim shape, colour and photographs before purchase.
- Keep the item complete and in the same condition until fitment is confirmed.
- Returns are handled under the return policy shown on the eBay listing and applicable statutory rights.
- A refund deduction may be applied only where eBay rules and applicable law permit it for diminished value caused by use, damage, alteration, missing parts or incomplete return. No automatic restocking charge is stated here.
- An item that is faulty, damaged in transit or materially not as described is handled under eBay's return process and the buyer's statutory rights.
Support a Small Business and Reuse Quality Parts
♻️ Buying used keeps useful components in service. It supports a local small business, reduces avoidable waste and can lower the amount of new material, energy and packaging needed to keep an existing vehicle on the road. Thank you for choosing reuse before replacement with newly manufactured parts. 🚗🌍