FIAT PANDA 169 2003-2011 BONNET LOCK CATCH LATCH 51780514 51783738 51899012
FIAT PANDA 169 2003-2011 BONNET LOCK CATCH LATCH 51780514 51783738 51899012
Front Bonnet Lock Catch Latch Assembly
Mechanical bonnet locking and release assembly for the Fiat Panda Type 169. The latch mounts at the front centre of the upper slam panel, engages the bonnet striker and releases through the interior bonnet-release cable.
Vehicle & Fitting-Location Reference
Vehicle reference photos are CC0 images from Wikimedia Commons and are used only to identify the correct generation/body style. Colour, trim, wheels and registration are not part of the sale.
Item Details & Specifics
Engineering & Reference Numbers
| Number | Status | How To Use It |
|---|---|---|
| 51780514 | Earlier reference | Previous number in the manufacturer supersession chain. Compare with your removed part and VIN. |
| 51783738 | Middle reference | Catalogued lock number for Panda 169 applications covering 2003-2011 model catalogues. |
| 51899012 | Later replacement reference | Later number replacing 51783738. Shape and cable/mounting details must still match. |
| Visible number on supplied item | Not confirmed | No clear manufacturer number can be read from the supplied listing photographs; the numbers above are matching references, not a claim that every number is stamped on this item. |
Parts Compatibility Chart
| Vehicle | Years | Body / Chassis | Fitment Status | Required Check |
|---|---|---|---|---|
| Fiat Panda / Nuova Panda | 2003-2009 | Type 169, 5-door | CONFIRMED MODEL FAMILY | Match shape, cable lever, mounting ears and reference number chain. |
| Fiat Panda MY2009 | 2009-2010 | Type 169, 5-door | CONFIRMED MODEL FAMILY | Check original part/VIN because catalogue changeovers can overlap registration years. |
| Fiat Panda MY2011 | 2010-2011 | Type 169, 5-door | CONFIRMED MODEL FAMILY | Compare against 51783738 / 51899012 and the actual photographs. |
| Fiat Panda Classic | 2012 | Late Type 169 | POSSIBLE — NOT GUARANTEED IN THIS LISTING | Manufacturer catalogue links 51899012 to 2012 Panda Classic; obtain VIN confirmation before ordering. |
This Part Is Not Listed As Fitting
| Vehicle / Version | Status | Reason |
|---|---|---|
| Fiat Panda Type 319 | DOES NOT FIT | Different third-generation body introduced from 2012. |
| Fiat Panda Type 141 / earlier square-body Panda | DOES NOT FIT | Different generation and latch arrangement. |
| Fiat 500, Punto, Grande Punto, Doblo or other Fiat models | NOT CONFIRMED | No cross-model fitment has been verified for this individual part. |
| Any vehicle where cable end, mounting pattern or latch profile differs | DOES NOT FIT | Visual and mechanical layout must match exactly. |
What This Part Does
Primary Function
Holds the bonnet securely against its striker when closed and releases the primary catch when the cabin lever pulls the cable.
Safety Function
Works with the secondary safety catch so the bonnet remains retained until it is deliberately released at the front of the vehicle.
Common Fault Symptoms
- Bonnet will not click or stay fully closed.
- Bonnet sits proud, rattles or appears loose after closing.
- Release lever feels unusually stiff, loose or does not return.
- Bonnet is difficult to open even after the interior handle is pulled.
- Excessive slamming is needed to engage the latch.
- Visible corrosion, bent lever, damaged spring, worn jaw or seized movement.
- Repeated misalignment between the bonnet striker and lock.
Why Choose an Original Manufacturer-Fit Part?
An original manufacturer-fit latch is designed around the vehicle's mounting-hole position, cable travel, striker geometry and bonnet closing load. A correctly matched original part can reduce the risk of poor alignment, incorrect cable engagement, weak spring action and repeated adjustment that may occur with low-cost reproduction parts.
Potential saving: pre-owned vehicle parts can, in some cases, cost up to 70% less than a new equivalent. The actual saving depends on current dealer and aftermarket pricing, so compare prices before purchase.
Fitting Guide
Suggested Tools
- Ratchet and socket suitable for the existing M6 fasteners; a 10 mm socket is common, but check your bolt heads first.
- Trim-removal tool or suitable flat screwdriver for grille/trim clips.
- Small pliers for the release-cable end.
- Marker pen or paint marker to record the original latch position.
- Penetrating lubricant, light multipurpose grease, torch and protective gloves.
Step-by-Step Overview
- Park on level ground, switch off the ignition, open the bonnet and support it securely.
- Photograph and mark the current latch position before loosening anything. This provides a useful alignment reference.
- Remove the front grille or upper trim required to access the latch fasteners. Keep all clips safe.
- Release the bonnet-opening cable from the latch lever and cable retaining point without kinking the cable.
- Undo the retaining fasteners and remove the old latch. The manufacturer catalogue shows three M6 retaining screws on the relevant assembly; verify your vehicle before work.
- Connect the release cable to the replacement latch, position the latch and install the fasteners loosely.
- Use the slotted mounting holes to align the latch with the bonnet striker. Lower the bonnet slowly and check engagement—do not slam it during adjustment.
- When alignment is correct, tighten the fasteners securely, lightly lubricate the moving points and test the cabin release, primary latch and secondary catch several times.
- Refit the grille/trim and complete a final safety check before driving.
Static Garage Labour Cost Calculator
No scripts or active content are used. Calculate labour with: hourly rate × booked time = estimated labour charge.
| Estimated Time | £40/hr | £60/hr | £80/hr | £100/hr | £120/hr |
|---|---|---|---|---|---|
| 0.50 hour | £20 | £30 | £40 | £50 | £60 |
| 0.75 hour | £30 | £45 | £60 | £75 | £90 |
| 1.00 hour | £40 | £60 | £80 | £100 | £120 |
Illustrative labour only. Rates, minimum charges, diagnostic time, seized fasteners and additional trim repairs vary by garage and location.
Workshop, Stock & Dispatch
Fitting Service
Mechanical fitting may be available subject to technician and workshop availability. Arrange only through eBay Messages before travelling.
Large Stock Holding
More than 25,000 parts are stated as held in stock and on the shelf at any one time, with items prepared for tracked dispatch.
Workshop and warehouse photos are CC0 reference images from Wikimedia Commons. They illustrate the service and dispatch process and are not evidence of the seller's specific premises.
Delivery, Address & International Orders
- International delivery is available to eligible destinations through eBay's Global Shipping Programme or other eligible eBay international services where shown at checkout.
- eBay determines destination eligibility, delivery cost, import charges, duties and exclusions dynamically at checkout; a fixed country list would therefore be unreliable.
- Please ensure the delivery address shown at checkout is complete and correct before payment. We cannot change the checkout address after the order is placed.
- No free-postage claim is included in this description; use the postage price and service shown by eBay for your destination.
Returns & Correct-Part Checklist
Before Ordering
- Confirm Type 169 and 5-door body.
- Compare all photographs.
- Check 51780514 / 51783738 / 51899012.
- Compare cable end and mounting pattern.
- Ask through eBay Messages when unsure.
Return Handling
Returns are handled under the listing's stated 30-day policy, eBay rules and applicable consumer rights. No blanket restocking fee is applied. Any permitted reduction for loss of value can only be considered where eBay's rules allow it, for example when an item is returned altered, damaged, incomplete or in a materially different condition.
Support a Local Small Business & Reuse More
Thank you for supporting an independent UK automotive-parts business. Choosing a serviceable pre-owned part helps keep usable components in circulation, reduces demand for new manufacturing and can prevent recoverable material from becoming waste. 🚗♻️📦
Every careful fitment check helps us send the correct part first time, reduce unnecessary transport and minimise avoidable returns.
Support a Local Small Business & Reuse More
Thank you for supporting an independent UK automotive-parts business. Choosing a serviceable pre-owned part helps keep usable components in circulation, reduces demand for new manufacturing and can prevent recoverable material from becoming waste. 🚗♻️📦
Every careful fitment check helps us send the correct part first time, reduce unnecessary transport and minimise avoidable returns.