Fiat Scudo 220 Mk1 1995-2006 Right A Pillar Interior Trim 1462001077
Fiat Scudo 220 Mk1 1995-2006 Right A-Pillar Interior Trim
| Part | Front A-pillar interior trim / pillar cover |
| Position | Vehicle right-hand side when seated facing forwards |
| UK RHD vehicle | Driver / offside front A-pillar |
| LHD vehicle | Passenger / right-front A-pillar |
| Part number | 1462001077 |
| Visible marking | Fiat moulding and letter D visible in the listing photograph |
| Donor listing | 2005 Fiat Scudo 2.0 JTD 16V |
| Material | Moulded automotive interior plastic; exact polymer grade is not legible in the photographs |
| Colour | Grey; compare shade and texture because age, light and screen settings can alter appearance |
| Condition | Used. Expect age-related marks, dust or cosmetic wear. Inspect every supplied photograph before purchase. |
| Warranty | 30-day seller warranty as selected in the eBay listing |
Number to match
- Confirm the number on your old trim or with a manufacturer parts catalogue.
- Confirm it is the vehicle-right piece, not the left side.
- Compare the lower dashboard edge, upper headlining edge and door-seal profile.
- Compare every clip, tab, screw point and any grab-handle opening.
- Do not rely only on registration, engine size or eBay's automatic compatibility checker.
| Make / Model | Years | Application Status | Buyer Verification Required |
|---|---|---|---|
| Fiat Scudo I / Type 220 | 1995-2006 | Primary application; includes 2004-2006 facelift. The listing donor is a 2005 2.0 JTD 16V. | Match 1462001077, vehicle-right side, colour, handle/opening layout and all fixing points. |
| Citroen Jumpy I / Dispatch I | 1994-2006 | Exact-number cross-reference exists within this generation. | Do not assume every trim grade is identical. Number and photograph match are mandatory. |
| Citroen Evasion / Synergie | 1994-2002 | Exact-number right A-pillar cross-reference. | Confirm interior colour/code, climate-control trim variation and fixing geometry. |
| Fiat Ulysse I | 1994-2002 | Exact-number right A-pillar cross-reference. | Confirm 1462001077 and compare every edge, clip and aperture. |
| Lancia Zeta | 1995-2002 | Exact-number right A-pillar cross-reference. | Confirm number, colour, trim specification and mounting points. |
| Peugeot 806 | 1994-2002 | Exact-number right A-pillar cross-reference; a 2000 vehicle example is recorded. | Confirm number and full photo match before ordering. |
- Fiat Scudo II / Type 270 or 272, 2007-2016.
- Later Scudo generations, including 2022-on vehicles.
- The vehicle-left A-pillar trim.
- Any vehicle whose old part carries a different moulded number or visibly different clip/tab layout.
- Any colour or texture mismatch that is unacceptable to you.
- Vehicles with a different grab-handle, airbag, headlining or dashboard-edge arrangement.
- Peugeot Expert I is not presented here as confirmed fitment. Do not buy only because it shares a related platform; provide the old number and photographs through eBay Messages for checking.
Visible damage
Cracks, splits, deep scratches, broken edges, discolouration or impact damage can leave the cabin looking unfinished.
Loose or rattling trim
Broken clips or tabs can cause movement, buzzing or rattling over uneven roads and may prevent the door seal or headlining from sitting correctly.
Poor alignment
Warped or incorrect trim can leave gaps around the dashboard, windscreen edge, roof lining or door aperture.
Missing cover
A missing A-pillar panel exposes bodywork, seams or wiring routes and removes the intended cabin finish and protection.
- Designed around the vehicle's original dashboard, headlining, door seal and clip positions.
- Original moulding number gives a stronger identification check than appearance alone.
- Texture, contours and mounting geometry are more likely to match than an unverified low-cost pattern copy.
- Reusing a serviceable part avoids unnecessary manufacture and keeps usable material in circulation.
- Selected used parts may cost substantially less than new dealer-supplied replacements.
Potential saving
On selected vehicle parts, buying used may save up to 70% compared with current new replacement pricing. This is a seller estimate, varies by part and supplier, and is not guaranteed for every item.
Best value comes from buying the correct part once: match the number, side and photographs before checkout.
Suggested tools
- Plastic trim-removal levers
- Torx driver set
- Phillips screwdriver where fitted
- Small 8 mm / 10 mm socket set where fitted
- Small pick for screw caps or clips
- Flashlight and clean protective cloth
- Replacement clips if the old clips are brittle or damaged
Estimated fitting time
Typical hands-on time: 20-40 minutes.
A garage may bill 0.5-1.0 hour because of minimum labour charges, seized fasteners, broken clips, cleaning, airbag precautions or previous damage.
Difficulty: basic to intermediate trim work.
- Park safely, remove the key and protect the dashboard, door seal and headlining with a clean cloth.
- Inspect the old trim for screw caps, grab-handle fixings or hidden Torx screws. Do not pull until all visible fasteners are removed.
- Start at an accessible upper edge with a plastic trim tool. Release clips one at a time without twisting the pillar cover.
- Lift the old panel away carefully. Do not pull on wiring, airbag tethers or the door seal.
- Compare the old and replacement panels side by side: number, side, tabs, clip positions, lower dashboard shape, top edge and colour.
- Transfer reusable clips or grommets only where their condition is sound. Replace brittle or distorted clips.
- Engage the lower locating edge first if required, align all clips, then press evenly by hand until seated.
- Refit screws, handle and caps without overtightening. Re-seat the door seal and check the headlining edge.
- Confirm the panel is secure, does not obstruct visibility, and does not rattle. Complete any SRS checks required by the manufacturer.
Formula: garage hourly rate × billed labour time = estimated labour charge. Parts, VAT treatment, diagnostics, clips and minimum charges may be additional.
| Garage Rate | 0.5 Hour | 0.75 Hour | 1.0 Hour |
|---|---|---|---|
| £50 / hour | £25.00 | £37.50 | £50.00 |
| £70 / hour | £35.00 | £52.50 | £70.00 |
| £90 / hour | £45.00 | £67.50 | £90.00 |
| £110 / hour | £55.00 | £82.50 | £110.00 |
| £130 / hour | £65.00 | £97.50 | £130.00 |
UK & international delivery
This listing is enrolled in eBay's Global Shipping Programme. Eligible destinations are shown by eBay at checkout; availability depends on the item, destination and programme rules. International tracking, import VAT and duties are handled according to eBay's checkout process.
Collection
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Checkout address
Ensure the delivery address is complete and correct before payment. The seller cannot change the address after checkout; an incorrect order may need to be cancelled and repurchased.
VAT treatment
Under the seller's stated used-parts margin/global accounting treatment, no separate reclaimable VAT amount is itemised on the seller invoice. International buyers may still be charged import VAT, duties or customs fees by eBay at checkout.
- Fitment information is provided to help identify the part, but the buyer must complete the number, side and photo checks before purchase.
- Ask through eBay Messages when unsure and provide the old part number plus clear photographs of both sides and the mounting points.
- Do not install, drill, glue, paint, cut or alter the part until compatibility has been confirmed.
- Return the exact supplied item in the same condition, with all included clips or fittings and secure packaging.
- Any refund deduction is handled only where eBay rules permit and only for actual loss in value caused by installation, alteration, damage, missing pieces or inadequate return packaging. A deduction of up to 50% is not an automatic restocking fee.
- Your statutory rights and eBay Money Back Guarantee are not affected.