Ford Focus Mk1 C170 1998-2004 Handbrake Parking Brake Lever Assembly Gaiter
Ford Focus Mk1 C170 1998-2004 Handbrake Parking Brake Lever Assembly Gaiter
One used Ford Focus Mk1/C170 mechanical handbrake lever assembly with black moulded handle, release button, black leather-look synthetic gaiter, plastic mechanism housing and metal mounting/ratchet components, supplied exactly as shown in the listing photographs.
Donor identification: the underside has handwritten “Focus 2003” stock identification. This is not a stamped engineering number and must not be used by itself to confirm fitment.
| Part type | Mechanical handbrake / parking brake lever assembly |
| Position | Centre console, between the front seats |
| Colour | Black handle and black gaiter |
| Main materials | Moulded polymer housing/handle, metal ratchet and mounting hardware, synthetic leather-look gaiter |
| Vehicle orientation | UK right-hand-drive donor application; other-market versions are not confirmed |
| Condition | Used; expect age-related marks, surface dirt, wear and minor cosmetic imperfections. Inspect every photo. |
| Included | Only the components visible in the photographs |
| Warranty | 30-day warranty, subject to the listing terms |
No complete stamped part number can be read in the supplied photographs, and the current item specifics state “Does not apply”.
A commonly advertised engineering family for visually similar Focus Mk1 levers is 98AG-2780. This reference is not physically verified on this exact unit, must not be entered as the exact MPN, and must not be used alone to purchase. Suffixes and mounting details can vary. Match the photos and vehicle details or request a check through eBay Messages.
Confirmed from the current listing’s 35-vehicle compatibility set: Ford Focus Mk1/C170 hatchback, chassis DAW/DBW, model years 1998–2004, limited to the engine groups below. Physical photo matching remains essential.
| Vehicle / body | Exact years | Engine | Power | Engine codes |
|---|---|---|---|---|
| Focus Mk1/C170 Hatch DAW/DBW | 1998–2004 | 1.4 16V petrol, 1388cc | 55kW / 75hp | FXDA, FXDB, FXDC, FXDD |
| Focus Mk1/C170 Hatch DAW/DBW | 1998–2004 | 1.6 16V petrol, 1596cc | 74kW / 100hp | FYDA, FYDB, FYDC, FYDD, FYDH |
| Focus Mk1/C170 Hatch DAW/DBW | 1998–2004 | 1.8 16V petrol, 1796cc | 85kW / 115hp | EYDB, EYDC, EYDD, EYDE, EYDF, EYDG, EYDI, EYDJ, EYDL |
| Focus Mk1/C170 Hatch DAW/DBW | 1998–2004 | 2.0 16V petrol, 1988cc | 96kW / 131hp | EDDB, EDDC, EDDD, EDDF |
| Focus Mk1/C170 Hatch DAW/DBW | 1998–2004 | 1.8 Turbo DI / TDDi diesel, 1753cc | 66kW / 90hp | C9DA, C9DB, C9DC |
Registration dates can differ from model years. Use chassis/engine code and the photographed mounting details, not registration year alone.
| Vehicle / version | Reason |
|---|---|
| Focus Mk1 saloon DFW or estate DNW | The live listing confirms hatchback DAW/DBW only |
| Focus Mk2/C307/DA3 and later, generally 2005 onward | Different generation and console/mechanism design |
| Focus ST170, Focus RS, special-performance trim | Not included in the confirmed engine-code set |
| 1.8 TDDi 75hp BHDA/BHDB; TDCi 100hp FFDA; TDCi 115hp F9DA/F9DB | Not included in the confirmed 35-vehicle set |
| Flexifuel, Bi-Fuel or other engine codes not listed above | Not confirmed by the current listing data |
| Ford Ka, Fiesta, Mondeo, C-Max or other Ford models | Similar reference numbers online do not prove interchangeability |
| Left-hand-drive or non-UK market vehicles | Not confirmed; compare all mountings, switch and cable connection |
- Check your car is a Ford Focus Mk1/C170 hatchback with chassis code DAW/DBW and a listed engine code.
- Compare the black handle, release button and gaiter shape with your original part.
- Compare the off-white mechanism housing, base shape and every mounting-hole position.
- Match the parking-brake cable hook/clevis and adjustment arrangement.
- Match the warning-light switch position and electrical connector, where fitted.
- Check the gaiter frame clips and centre-console aperture.
- When uncertain, send the registration/VIN, engine code and a clear photo of the existing lever through eBay Messages before ordering.
|
WHERE IT FITS & WHAT IT CONTROLS
The lever is fitted inside the centre console between the front seats. Pulling the lever operates the ratchet and tensions the parking-brake cables, which apply the rear parking-brake mechanism. A small switch may also signal the red parking-brake warning lamp on the instrument panel. The lever is only one part of the system: cables, rear shoes/calipers, adjusters and warning-switch wiring must also be in serviceable condition. |
| ⚠ Excessive lever travel or unusually high number of clicks | ⚠ Lever will not hold or the ratchet slips |
| ⚠ Release button sticks, jams or will not return | ⚠ Loose, rattling or worn pivot feel |
| ⚠ Parking-brake warning light remains on or behaves intermittently | ⚠ Torn gaiter or poor centre-console trim fit |
| Diagnosis warning: poor holding force can also be caused by stretched/seized cables, incorrect adjustment, worn rear shoes, faulty calipers or contaminated brake components. Diagnose the complete parking-brake system before replacing parts. | |
A correctly matched original factory-fit used component is designed around the vehicle’s mounting geometry, cable line, warning-switch location, console aperture and trim fit. That can reduce modification, alignment and fitment problems associated with a poorly matched low-cost pattern alternative.
Buying a reusable used component can provide savings of up to 70% compared with a comparable new replacement in some cases. Actual savings depend on the part, condition, availability and current market price and are not guaranteed.
- Park on level ground, select first gear/P, switch off, chock the wheels and secure the vehicle.
- Remove the centre-console/gear-lever trim carefully and release the gaiter frame.
- Disconnect the parking-brake warning-switch connector, where fitted.
- Release cable tension at the adjuster and disconnect the cable/clevis from the lever.
- Remove the lever mounting fasteners and lift the assembly out.
- Compare the replacement and original side by side: base, holes, cable point, switch, gaiter frame and console fit.
- Transfer any required switch or trim only where compatible and serviceable.
- Install the replacement and tighten fasteners to the correct Ford workshop specification for the vehicle; no torque value is guessed here.
- Reconnect and correctly adjust the cable so both rear brakes apply evenly and release fully.
- Refit trim, confirm warning-lamp operation, check lever travel, verify wheel release and test holding force on a safe incline.
Wheel chocks • Interior trim tools • Metric socket and ratchet set • Metric spanners • Screwdrivers/Torx bits • Pliers • Torque wrench • Work light • Protective gloves • Jack and correctly rated axle stands only if underbody access is necessary. Never rely on a jack alone.
Typical labour time: approximately 0.75–1.50 hours, depending on trim removal, corrosion, cable condition, adjustment and technician experience.
| Estimated time | £50/hour | £70/hour | £90/hour | £110/hour |
|---|---|---|---|---|
| 0.75 hour | £37.50 | £52.50 | £67.50 | £82.50 |
| 1.00 hour | £50.00 | £70.00 | £90.00 | £110.00 |
| 1.25 hours | £62.50 | £87.50 | £112.50 | £137.50 |
| 1.50 hours | £75.00 | £105.00 | £135.00 | £165.00 |
Static estimate only. Labour, diagnostic work, consumables, additional parts and applicable taxes vary by garage. Fitting service may be available through ThePartPilot, subject to availability and prior arrangement through eBay Messages.
|
📦 25,000+ PARTS Stocked and on the shelf |
🛡 30-DAY WARRANTY Subject to listing terms |
⭐ TOP RATED 99%+ positive feedback |
|
🚚 FAST DISPATCH Tracked next-day dispatch on qualifying orders placed before 3pm |
🔧 FITTING AVAILABLE Subject to workshop availability |
🌍 INTERNATIONAL Eligible destinations through eBay GSP |
Collections are available 7 days a week, including bank holidays, until 8pm by appointment. Request collection availability, location and arrival instructions through eBay Messages before travelling.
Where the item and destination are eligible, eBay manages international postage, tracking, customs processing and the checkout price. Availability is controlled by eBay and may vary by item, country and buyer address.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
Where applicable to this used item, it is sold under the VAT Margin Scheme. VAT is not shown separately on the invoice and cannot be reclaimed as input VAT.
Fitment: please complete all checks in the compatibility section before purchase. Asking for a pre-purchase check through eBay Messages is strongly recommended whenever any detail differs.
Returns: returns are handled under the return terms shown on the listing and eBay policy. Any permitted refund deduction will only reflect actual loss in value where an item is returned used, fitted, altered, damaged, contaminated or incomplete, as allowed by eBay.
Address: customers must ensure the delivery address shown at eBay checkout is complete and correct. For account and transaction security, the order cannot be redirected to a different address after payment.
|
♻ SUPPORT REUSE & A LOCAL BUSINESS
Choosing a serviceable used part keeps usable material in circulation, reduces demand for new manufacturing and helps prevent automotive components becoming waste too soon. Your purchase also supports an independent local automotive parts business and the jobs and services around it. Thank you for choosing reuse. 🌍💚 |
🚘 WE ALSO BUY CARS FOR CASH
Nationwide vehicle collection and same-day payment may be available, subject to appraisal, ownership checks, location and agreement. Enquire only through eBay Messages where permitted. |
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Collection is by confirmed appointment only. Use eBay Messages to request fitting or collection availability, the collection location and arrival instructions before setting off.