FORD FOCUS MK2 HEATED WINDSCREEN DEMISTER SWITCH PANEL 4M51-13D734-DC

Professionally dismantled, identified, stored and prepared for dispatch by a specialist UK automotive recycling operation.

This dashboard-mounted electrical switch assembly provides the driver interface for the vehicle's heated glass / demisting function. When operated in the correct vehicle configuration, the switch provides the control request used by the vehicle's electrical system to activate the associated heated-screen circuit.

It is an interior electrical control component rather than the heating element itself. Correct electrical specification, connector arrangement, switch configuration and part-number revision are therefore important.

Do not order from registration, model year or automated compatibility information alone.

The identifying reference supplied with this component is 4M51-13D734-DC. Ford made specification and equipment changes during vehicle production, and visually similar panels may use different switch, connector or electrical configurations.

Compare the complete stamped/moulded number, electrical connections, switch layout, trim configuration and all listing photographs against the component removed from your vehicle before purchase.

Door count alone does not establish compatibility. The source listing does not provide sufficient VIN/build data to certify every body variant. Match the exact component reference or request a VIN-based check.

• Vehicles using a different stamped or moulded switch-panel reference.
• Vehicles with a different electrical connector or pin configuration.
• Vehicles with a different heated-screen / demister equipment specification.
• Visually similar dashboard panels where the switch configuration differs.
• Any application assumed solely from model year, engine size, registration or body appearance.

A correctly matched factory-produced component was engineered around the vehicle's original dashboard architecture, electrical connectors, mounting geometry and control system.

Low-cost pattern alternatives can vary in moulding quality, tactile feel, electrical specification and dimensional accuracy. Reusing the correct original-production component can therefore provide an excellent balance of fit, function and value.

Indicative workshop time: approximately 0.5–1.0 hour where straightforward access is available.

• Non-marring interior trim removal tools
• Appropriate Torx / trim fasteners as fitted to the vehicle
• Small hand tools
• Protective trim cloth
• Suitable diagnostic equipment if vehicle-specific diagnosis is required

1. Confirm the replacement component number against the removed unit before dismantling.
2. Switch the ignition off and follow the manufacturer's electrical safety procedure.
3. Protect surrounding dashboard trim.
4. Carefully release the relevant centre/dashboard trim using non-marring tools.
5. Remove the panel fasteners where fitted.
6. Release the electrical connector without pulling on the wiring loom.
7. Compare connector, mounting points and switch layout with the replacement component.
8. Install the replacement switch/panel and reconnect the harness securely.
9. Refit all trim and fasteners.
10. Function-test the heated-screen/demister system.

Based on an indicative 0.5–1.0 hour installation window. Parts, diagnostics and VAT where applicable are excluded.

🔧 Professional fitting may also be available at our repair facility, subject to workshop availability. Please contact us through eBay Messages.

📦 Items are carefully packed for transit. Buyers pay the calculated shipping fee shown by eBay at checkout.

🌍 International delivery is available where eligible through eBay's Global Shipping Programme, including destinations across Europe, USA, Australia, Canada and other supported territories. Availability and charges are determined at checkout.

Please inspect all high-resolution listing photographs and compare the complete stamped/moulded part number before purchase. Automated compatibility/item-specific information should be treated as a guide rather than a substitute for component-number verification.

Returns and refunds are handled in accordance with the seller's stated eBay returns policy and applicable UK consumer law. Where legislation permits a reduction in refund because a returned item has suffered diminished value through handling beyond what is necessary to establish its nature, characteristics and functioning, any lawful deduction will be assessed according to the actual circumstances and condition of the returned item.

Where this used item is sold under the applicable Global VAT Margin Scheme for second-hand goods, VAT is accounted for on the seller's margin and is not separately itemised as recoverable input VAT on the sales invoice.

Choosing a quality recycled automotive component gives an existing part a productive second life and helps reduce demand for additional raw materials, manufacturing, packaging and associated transport. 🌍🔧

Every reused component supports the circular automotive economy while helping an independent UK business keep useful, high-grade vehicle parts out of the waste stream. Thank you for choosing smarter automotive reuse. 💚♻️🚗