Ford Focus Mk3 1.6 TDCi 2011-2018 Front Left Brake Caliper NSF Passenger ATE
Ford Focus Mk3 1.6 TDCi 2011-2018 Front Left Brake Caliper NSF Passenger ATE
THEPARTPILOT
Premium Recycled Car Parts | Worldwide Shipping | 25,000+ Parts In Stock
Product Details: Front Left Brake Caliper (ATE System)
You are viewing a fully inspected, factory-original replacement brake caliper. Choosing recycled car parts lets you save up to 70% off dealership retail prices while maintaining exact factory performance standards.
- Part Name: Front Left / Nearside (NSF) Brake Caliper
- Braking System: ATE Factory Spec
- Material: High-Strength Automotive Cast Iron & Steel Piston Assembly
- Vehicle Application: Ford Focus Mk3 (2011–2018) 1.6 TDCi
This caliper is fitted to the front left (nearside / passenger side) wheel assembly. It houses the hydraulic piston and brake pads, clamping them against the brake disc when pressure is applied to slow down or stop the vehicle securely.
A sticking, seized, or leaking caliper can cause the car to pull heavily to one side under braking, excessive fuel consumption due to constant drag, uneven or rapid brake pad wear, burning smells from the front wheel, or a spongy brake pedal. Replacing it restores safe, balanced hydraulic braking performance.
Vehicle Fitment Reference
Please match your vehicle configuration with the reference photo below to ensure correct ordering.
Reference: Ford Focus Mk3 Body Style (Compatible with 2011–2018 models)
Reference: Front Wheel Brake Assembly & Caliper Unit
Parts Compatibility Chart
Always verify fitment using the provided images and system specifications rather than automated item specifics alone.
| Make & Model | Engine / Variant | Years | Fitment Status |
|---|---|---|---|
| Ford Focus Mk3 | 1.6 TDCi Diesel | 2011 - 2018 | ✔ WILL FIT (NSF) |
| Ford C-Max Mk2 | 1.6 TDCi / 1.6 EcoBoost | 2010 - 2019 | ✔ WILL FIT (Check ATE) |
| Ford Focus Mk3 (Rear Wheels) | All Engines | 2011 - 2018 | ❌ WILL NOT FIT (Front Only) |
| Ford Focus Mk2 | 1.6 TDCi | 2004 - 2011 | ❌ WILL NOT FIT |
Fitting Guide & Garage Costs
Required Tools & Setup
- Jack and axle stands
- 13mm & 15mm spanners/sockets
- Brake line clamp & bleeding kit
- DOT 4 Brake Fluid
Estimated Repair Time: 1.0 to 1.5 Hours
Instructions: Secure vehicle, remove front left wheel. Clamp flexible brake hose to prevent fluid loss. Undo mounting bolts and slide off old caliper. Fit new ATE caliper, torque bolts to factory spec, reconnect brake line with fresh crush washers, and bleed the hydraulic system thoroughly to remove air pockets.
Garage Labor Estimator 🧮
Expected costs if installed by a professional UK independent garage.
Average Hourly Rate: £75.00
Estimated Time: 1.0 Hour
Professional Fitting Available! 🛠️
Subject to availability, our expert technicians can fit this part for you at our professional workshop. Get in touch to check diary availability and book your appointment.
Shipping, VAT & Returns Policy
🌍 Worldwide Shipping: Shipped globally via the eBay Global Shipping Programme (GSP). We dispatch to the USA, Canada, Australia, European Union countries, and all regions supported by GSP.
🧾 VAT Scheme: We operate under the Global VAT Margin Scheme. No VAT is charged or reclaimable.
We provide comprehensive fitment details so you can order correctly the first time.
Any parts returned under the "Doesn't Fit" or "Item Not As Described" category when vehicle compatibility has been accurately outlined will incur a 50% Restocking Fee. If you are ever unsure about fitment, contact us prior to purchasing and we will verify it for you!
🚗 WE BUY CARS FOR CASH! Nationwide collection & same day payment available. Contact us if you have a scrap, damaged, or unwanted vehicle.
Inside ThePartPilot Headquarters
With over 25,000 parts on the shelf at any given time, every order is handled with maximum care and prompt dispatch.
Secure, dry indoor warehouse storage keeping components protected.
Carefully packaged components ready for courier collection.
Support Local, Save The Planet 🌍🤝
Purchasing recycled automotive components saves money while directly cutting down the heavy carbon emissions tied to manufacturing new metal parts. Thank you for supporting a local small business and choosing a sustainable path for your car repairs!
Contact & Support 📱
Need confirmation on fitment or have a technical question?
Scan the QR code to chat with us instantly on WhatsApp!
© 2026 ThePartPilot. All rights reserved. Specialist Recycled Automotive Parts.