Ford Mondeo Mk4 BA7 2007-2015 Roof Courtesy Dome Light 8A6A-13K767-AB34X1
| ✓ 30 DAY WARRANTY | ✓ FITMENT SUPPORT | ✓ 25,000+ PARTS | ✓ INTERNATIONAL SALES |
FORD MONDEO MK4 BA7 2007-2015
INTERIOR ROOF COURTESY / DOME LIGHT
Actual listing photograph — front face, lenses and three-button arrangement.
|
Actual listing photograph — angled view showing housing shape and condition.
|
| Manufacturer | Ford |
| Part Type | Interior roof courtesy / dome / reading light assembly |
| Engineering / Part Number | 8A6A-13K767-AB34X1 |
| Number Without Separators | 8A6A13K767AB34X1 |
| Ford Base Number | 13K767 |
| Service / Cross Reference | 1528640 — independently cross-referenced; match your original unit before ordering |
| Interchange Part Number | 8A6A-13K767-AB — use the complete AB34X1 suffix for the strongest match |
| Superseded Part Number | No confirmed superseding number established for this exact AB34X1 specification |
| Primary Vehicle | Ford Mondeo Mk4 / BA7 / CA2 |
| Primary Years | 2007-2015 Mk4/BA7 generation — 2015 vehicles require generation confirmation |
| Body Styles | 5-door hatch/liftback, 4-door saloon and 5-door estate where the original lamp specification matches |
| Placement | Vehicle headlining / interior roof. Exact front, centre or rear use can vary by model and trim specification |
| Colour / Finish | Light grey / stone-grey-beige appearance as photographed — visually compare with your existing headlining and lamp |
| Visible Construction | Moulded plastic outer housing, translucent patterned diffuser/lenses and internal electrical contacts/components |
| Condition | Pre-owned component. Cosmetic age/use marks may be present — study the actual photographs supplied |
| Warranty | 30 days |
| eBay Item Number | 147493783046 |
|
Mk4 5-door hatch/liftback reference
Public-domain vehicle reference image. |
Mk4 5-door estate reference
Public-domain vehicle reference image. |
| DRIVER / FRONT SEAT | PASSENGER / FRONT SEAT |
| Make | Model / Generation | Years | Body | Fitment Rule |
| Ford | Mondeo Mk4 / BA7 / CA2 | 2007-2015* | 5-door hatch / liftback | Full number, face and connector must match |
| Ford | Mondeo Mk4 / BA7 / CA2 | 2007-2015* | 4-door saloon | Full number, face and connector must match |
| Ford | Mondeo Mk4 / BA7 / CA2 | 2007-2015* | 5-door estate | Full number, face and connector must match |
| Vehicle | Cross-reference window | Confidence / Buying Rule |
| Ford C-MAX I | 2007-2010 / 2011 catalogue window | Exact AB34X1 examples found — full-number match required |
| Ford Focus Mk2 | 2004-2011 catalogue family; exact 2009 example verified | Do not purchase solely on year — compare original number and connector |
| Ford Kuga Mk1 | 2008-2013 generation | Exact AB34X1 references found — location can differ from Mondeo |
| Ford S-MAX Mk1 | 2006-2014 | Exact AB34X1 references found — match number, colour and connector |
| Ford Galaxy | Exact examples documented from 2011-2015 | Exact-number examples found — roof position can vary |
| Ford Transit Connect Mk2 | 2013 onward; exact examples documented in later production | Only purchase where original unit carries the same complete number |
✗ Your original lamp carries a different complete suffix and you have not confirmed interchangeability.
✗ Your connector shape or pin arrangement differs.
✗ Your roof-light button or lens layout differs from the actual photographs.
✗ Your mounting tabs, screws or housing shape are different.
✗ Your vehicle has a different overhead console incorporating additional alarm, sensor or sunroof controls.
✗ You are relying only on registration year without comparing the original component.
The interior roof-light assembly provides useful cabin illumination when entering the vehicle, finding items in the cabin, fastening seatbelts or reading at night.
Depending on vehicle configuration, the courtesy-light circuit can operate in response to door opening, vehicle locking/unlocking and manual switch operation. The individual buttons on the lamp face allow occupants to control the applicable reading/courtesy functions.
Because the lamp forms part of the vehicle's original interior electrical installation, the correct housing, connector and switch specification are important for proper operation and a neat fit in the headlining.
• One reading-light function does not respond to its switch.
• Intermittent or flickering operation.
• A sticking, damaged or non-responsive switch.
• Lamp remains illuminated unexpectedly after the vehicle should have timed it out.
• Loose housing or damaged lens/diffuser.
• Heat damage, corrosion or poor electrical contact inside the assembly.
• Visible deterioration that spoils the appearance of the headlining area.
A correctly matched factory Ford component gives you the best chance of retaining the original mounting geometry, connector arrangement, switch feel, lens design, light distribution and interior appearance.
Cheap unbranded replacement parts can sometimes differ in trim shade, moulding accuracy, connector fit or switch quality. For a visible interior component such as a roof lamp, even a small difference can affect how neatly it sits in the headlining.
Buying a serviceable pre-owned factory component can also cost substantially less than purchasing a new replacement. Actual savings depend on the current new-part price, so we do not use an artificial fixed saving percentage for every component.
🔧 Small screwdriver or suitable Torx driver if your original fixing uses screws
🔦 Inspection torch
🧤 Clean gloves to protect the headlining and lens
2. Protect the surrounding headlining. Carefully release the original lamp using the correct trim access point, retention clips or screws applicable to your vehicle.
3. Support the lamp as it is lowered — do not allow it to hang by the wiring.
4. Disconnect the electrical plug carefully without pulling the wiring loom.
5. Before installation, place the old and replacement units side by side and compare the engineering number, connector, pin arrangement, mounting points, housing shape, buttons and trim colour.
6. Connect the replacement lamp and test the manual switches and applicable door/courtesy function before fully securing it into the headlining.
7. Refit the lamp evenly and make sure the housing sits flush without trapping wiring or damaging the headliner.
Practical estimated fitting time: approximately 15-30 minutes for a competent fitter where the lamp is directly accessible. This is an estimate rather than a manufacturer flat-rate time; trim specification, damaged clips, diagnostic work and additional roof-console equipment can increase the time required.
| Garage Hourly Rate | 15 Minutes / 0.25 hr | 30 Minutes / 0.50 hr |
| £40 / hour | £10.00 | £20.00 |
| £60 / hour | £15.00 | £30.00 |
| £80 / hour | £20.00 | £40.00 |
| £100 / hour | £25.00 | £50.00 |
| £120 / hour | £30.00 | £60.00 |
| £150 / hour | £37.50 | £75.00 |
This is a pre-owned automotive component and may show cosmetic signs associated with previous installation, handling and age. The actual item photographs form an important part of the condition description.
Please inspect the lens condition, outer housing, colour and switch layout in the photographs before purchase. Unless specifically shown or stated, do not assume that surrounding headlining, wiring, additional trim panels or unrelated fittings are included.
Electrical and trim components should always be matched carefully because vehicle manufacturers can introduce specification changes during a production run.
International delivery is offered where this item is eligible through the international shipping programme displayed by eBay at checkout. eBay handles the applicable international leg, customs processing and buyer-facing international charges under the programme.
European destinations:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Gibraltar, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Other GSP destinations:
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda,
Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia,
Costa Rica, Dominica, Dominican Republic, Ecuador, El Salvador, Egypt, French Guiana, Grenada,
Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica,
Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico,
Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru,
Philippines, Qatar, Reunion, Russia, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore,
South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad & Tobago,
Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
| 📦 STOCKED & SHELVED | 🔍 FITMENT FOCUSED | 🚚 CAREFULLY DISPATCHED |
Thank you for supporting THE PART PILOT. Every order supports a growing automotive parts business, the people who remove, identify, catalogue, store, pack and dispatch components, and the continued availability of harder-to-find vehicle parts.
Reusing a serviceable vehicle component extends its useful life and can reduce the need to manufacture an unnecessary replacement from new raw materials. 🌍🔧♻️ Keeping usable automotive parts in circulation is practical for owners, good for older vehicles and a sensible part of reducing avoidable waste.
Match 8A6A-13K767-AB34X1, the face design, colour, connector and mounting arrangement.
If you are unsure, ask us through eBay Messages before purchase.
Helping you order the correct part first time helps everyone avoid unnecessary fitting work, delays and returns.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.