Honda Jazz GD 2002-2008 Fuel Filler Flap Door Lid Assembly Blue 5Dr 74480-SAA
Honda Jazz GD 2002-2008 Fuel Filler Flap Door Lid Assembly Blue 5Dr 74480-SAA
| Part Type | Fuel filler flap, door, lid and housing assembly |
| Vehicle | Honda Jazz first-generation GD |
| Body Style | 5-door hatchback |
| Model Years | 2002, 2003, 2004, 2005, 2006, 2007 and 2008 GD body |
| Location | Left rear quarter panel around the fuel filler opening |
| Listed Base Number | 74480-SAA |
| Visible Mould Reference | SAA-00 |
| Housing Material | PP-GF30 glass-fibre-reinforced polypropylene marking visible |
| Colour | Light blue metallic — exact Honda paint code not verified |
| Fuel Label | Unleaded fuel only / 95 RON minimum label present |
| Transmission | Manual or CVT — transmission does not normally alter this body component |
| Seller Warranty | 30 days, subject to the listing terms and statutory rights |
THEPARTPILOT
Visible SAA-00, Honda and PP-GF30 markings
|
THEPARTPILOT
Unleaded fuel / 95 RON label shown
|
2004–2006 GD 5-door reference
|
2006–2008 GD rear view showing fuel-flap location
|
| Year | Model / Body | Common UK Engines | Status |
|---|---|---|---|
| 2002 | Jazz GD 5-door hatchback | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify colour |
| 2003 | Jazz GD 5-door hatchback | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify colour |
| 2004 | Jazz GD 5-door hatchback | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify colour |
| 2005 | Jazz GD 5-door hatchback | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify photos |
| 2006 | Jazz GD facelift 5-door | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify colour |
| 2007 | Jazz GD facelift 5-door | 1.2 i-DSI / 1.4 i-DSI | GD body fit — verify colour |
| 2008 | Jazz GD first-generation body only | 1.2 i-DSI / 1.4 i-DSI | Check GD shape carefully |
| Honda Jazz GE | Second-generation body, including vehicles registered in overlapping 2008 periods |
| Honda Jazz GK | Third-generation body |
| Honda Jazz GR | Fourth-generation body |
| Other Body Types | Honda City saloon, different body shapes or unrelated models |
| Different Components | Not a filler cap, fuel neck, release cable, fuel pump or engine-fuelling component |
| Different Paint Colour | Not guaranteed to colour-match without comparing the vehicle paint code and photographs |
- Confirm that your vehicle is a first-generation Honda Jazz GD 5-door.
- Compare the shape, hinge, mounting points, inner housing and fuel label with your existing part.
- Check that the base family on your part begins with 74480-SAA.
- Compare the light-blue paint colour under natural daylight.
- For a 2008 vehicle, compare the body shape with the vehicle photographs above.
- Send the registration, VIN and a clear photograph of the existing assembly through eBay Messages when uncertain.
The assembly is fitted in the left rear quarter panel, surrounding the vehicle's fuel-filler neck. It provides the exterior painted flap, hinge support and moulded surround covering the filler-cap area.
Its purpose is to keep the filler area tidy and protected while providing convenient access for refuelling. It does not operate the fuel pump, fuel injectors, engine management system or fuel-level sender.
- Fuel flap missing following accident damage or vandalism
- Broken hinge or cracked moulded housing
- Flap no longer sitting level or flush with the body
- Loose, rattling or difficult-to-close flap
- Scratched, dented, corroded or heavily chipped outer panel
- Damaged mounting points around the filler opening
- Missing or unreadable fuel-information label
A factory-manufactured Honda component was produced for the vehicle's original body aperture, hinge geometry, mounting points and surrounding trim. This normally provides a more predictable physical fit than an inexpensive reproduction manufactured to a broad pattern.
Reusing a serviceable original component can also cost substantially less than purchasing a new painted assembly. Depending on the component, availability and current retail price, used-part savings can sometimes reach up to 70%. Actual savings vary, and paint condition should always be considered.
- Park safely, switch off the ignition and allow the area to cool.
- Apply protective masking tape around the painted filler opening.
- Open the flap and remove the fuel cap by turning it anticlockwise.
- Locate and remove the retaining screw inside the filler opening.
- Support the assembly and carefully withdraw it from the body aperture without scratching the quarter panel.
- Compare the replacement and removed assemblies side by side before installation.
- Position the replacement assembly correctly and reinstall it in reverse order.
- Tighten the retaining fastener securely without overtightening the plastic housing.
- Refit the fuel cap and check that it seals and clicks correctly.
- Open and close the flap several times, confirming that it sits level and does not contact the bodywork.
- Clean protective gloves
- Protective masking tape
- Phillips screwdriver
- Small socket or driver set, according to the fastener fitted
- Nylon trim-removal tool
- Inspection torch
- Clean cloth
| Estimated Fitting Time | Approximately 20–40 minutes |
| Estimated Labour Units | Approximately 0.33–0.67 hours |
| Difficulty | Basic to intermediate, depending on corrosion, damage and fastener condition |
| Garage Rate | Estimated Labour Cost |
|---|---|
| £40/hour | £13.20–£26.80 |
| £50/hour | £16.50–£33.50 |
| £60/hour | £19.80–£40.20 |
| £75/hour | £24.75–£50.25 |
| £90/hour | £29.70–£60.30 |
| £100/hour | £33.00–£67.00 |
| £120/hour | £39.60–£80.40 |
With more than 25,000 used components held on the shelf, THEPARTPILOT specialises in supplying tested, reusable vehicle parts. Orders are checked against the listing, securely packed and prepared for tracked dispatch.
UK and international delivery options are displayed by eBay at checkout. International orders may be processed through eBay's international shipping programme where the item and destination are eligible.
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Réunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, Ukraine, Uruguay, United States and Vietnam.
Customers must ensure that the complete delivery address is correct before payment. For buyer and seller protection, an address normally cannot be manually changed after checkout. An incorrect order may need to be cancelled and purchased again using the correct address.
Sold under the Global Accounting VAT Margin Scheme. VAT is not shown separately on the invoice and is not reclaimable as input tax.
Please use the photographs, compatibility chart and part-number guidance before ordering. Where uncertain, request a fitment check through eBay Messages before completing the purchase.
Returns are handled through the applicable eBay return process, and statutory consumer rights are unaffected. Any permitted deduction can only reflect demonstrable diminished value caused by handling beyond what is necessary to establish the nature, characteristics and functioning of the item. No fixed restocking charge is applied.
The buyer remains responsible for confirming the body generation, component design and colour requirement. A vehicle registration alone may not identify a painted body component accurately.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Purchasing a reusable vehicle component supports a local independent business while helping extend the useful life of an existing part. Reuse can reduce demand for new raw materials, manufacturing energy and unnecessary waste.
Thank you for choosing a serviceable used component and helping keep quality car parts in circulation. 🚗💚