HYUNDAI TUCSON TL MK3 2015-2020 FRONT RIGHT DRIVER DOOR BLACK COMPLETE FREE POST

HYUNDAI TUCSON TL / TLE MK3 - 5-DOOR SUV

FRONT RIGHT DRIVER DOOR ASSEMBLY - BLACK - 2015 TO 2020 BODY FIT

Exact item: the front-right door assembly shown in the eight photographs below. The donor/listed vehicle year is 2018. The sale is for the pictured assembly and only the components visibly attached.

The part is FRONT RIGHT. On a UK right-hand-drive vehicle, that is the driver-side front door, also called offside front or OSF. Left and right are identified while seated in the vehicle facing forward.

The pressed-steel door body matches the Hyundai Tucson TL / TLE Mk3 UK/European 5-door body for 2015, 2016, 2017, 2018, 2019 and 2020. Attached trim, wiring, door glass, glass regulator, latch, mirror equipment, speaker and control modules can vary by production date and trim level.

Black is not one universal Hyundai paint shade. The exact paint code is not confirmed. Compare the donor photographs, your paint code and your original door before ordering. Allow for age-related shade variation, storage marks and possible refinishing or paint blending.

Static position guide for a right-hand-drive 5-door vehicle.

The door mounts at the right-hand A-pillar and closes against the B-pillar latch/striker.

These are the eight exact eBay-hosted item photographs. Inspect every image for condition, attached components, connector design, trim design, colour and storage marks.

ACTUAL ITEM PHOTO 1 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 2 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 3 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 4 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 5 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 6 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 7 OF 8

THE PART PILOT - ITEM 147412623234

ACTUAL ITEM PHOTO 8 OF 8

THE PART PILOT - ITEM 147412623234

The sale includes the exact door and only the components visibly attached in the eight item photographs. Specifications differ by trim and production date.

• Check the photographs for the door shell, outer handle, door glass, glass regulator, motor, latch, wiring loom, trim card, speaker, mirror and seals.
• Do not assume inclusion of unseen fixings, clips, control modules, keys, switches, mirror parts or trim pieces not clearly shown.
• Before fitting, compare connector count, pin layout, mirror features, keyless-entry equipment, speaker system, trim colour and glass markings.

Physical door-body fit and attached-equipment matching are separate checks.

• Earlier Hyundai ix35 / Tucson LM body, including overlapping 2015 registrations.
• Hyundai Tucson NX4 / Mk4 introduced for the UK from 2021 onward.
• Front-left passenger doors, either rear door, tailgates or any 3-door vehicle.
• A left-hand-drive driver-side door. On a left-hand-drive vehicle, the physical front-right position is the passenger side.
• Kia Sportage or any other vehicle unless an authorised catalogue and the original stamped part number independently verify the match.

1. Confirm the vehicle is a Hyundai Tucson TL / TLE Mk3 5-door with exact model year 2015, 2016, 2017, 2018, 2019 or 2020.
2. Confirm the required position is front-right / UK driver / OSF, not front-left or either rear door.
3. Compare the overall shape, hinge points, latch edge, door-glass frame, handle position and lower body contour line.
4. Compare every visible connector, pin count, wiring route and attached module.
5. Match mirror equipment such as power fold, heating, indicator, blind-spot warning and puddle light where fitted.
6. Compare door-glass markings, tint, regulator type, one-touch operation, trim colour, speaker system and keyless-entry equipment.
7. Check the paint code. Do not order by the word black alone.
8. Send the registration or VIN through eBay Messages before purchase when any detail is uncertain.

The assembly mounts to the right-hand A-pillar on upper and lower hinges and closes against the latch/striker at the B-pillar. It provides cabin access, weather sealing and a structural barrier. Depending on specification, the assembly can carry the glass, regulator, lock, handle, wiring, mirror, speaker, trim and seals.

Common reasons for replacement:

• Collision damage, deep creases, corrosion, split seams or a distorted door-glass frame.
• Door drop, uneven panel gaps, difficulty latching or repeated alignment problems.
• Wind noise, water ingress, damaged seals or door glass that binds in the channel.
• Damaged wiring or attached mechanisms causing central locking, electric glass, mirror or speaker faults.
• Damage to internal reinforcement or mounting areas after impact.

A correctly matched factory-fit donor component retains the original body contours, hinge geometry, latch position, glass channels, seal interfaces and equipment mounting points. That can reduce modification work and fit problems compared with a low-cost copy or bare repair skin.

A quality pre-owned assembly can also reduce the number of parts requiring transfer. Depending on condition, specification and current retail pricing, savings can be substantial and may approach 70 percent compared with buying a comparable brand-new assembly. Actual savings vary.

Professional fitting is strongly recommended. A complete door is heavy and awkward. Incorrect support or alignment can damage hinges, the A-pillar, latch, paint, wiring or glass. Use a second technician or an approved door stand.

1. Verify the replacement door and all attached components against the original before dismantling.
2. Record relevant vehicle settings, switch off the ignition and disconnect the battery negative terminal.
3. Protect the wing, sill and adjacent panels with covers and masking tape. Support the door with a padded stand or suitable lifting equipment.
4. Expose and disconnect the door-to-body electrical connector at the A-pillar. Do not pull on the wiring.
5. Mark the original hinge positions. Disconnect the door check strap while the door remains supported.
6. With an assistant controlling the weight, remove the hinge fasteners and lift the original door away without twisting the hinges.
7. Transfer any required trim, mirror, lock cylinder, wiring, modules, door glass, seals or hardware that do not match the vehicle specification.
8. Offer the replacement door to the aperture, install hinge fasteners, reconnect the check strap and route the harness exactly as designed.
9. Align the front and rear gaps, sill line, roof line and latch height. Tighten fasteners to the correct workshop-manual specification.
10. Reconnect electrics and battery. Test locking, handles, electric glass travel, mirror equipment, speaker, puddle light and keyless-entry equipment where fitted.
11. Carry out a controlled water-leak test and road test for wind noise. Recheck fasteners and panel alignment.

Required tools and equipment:

• Metric socket and spanner set
• Ratchet and extensions
• Torque wrench
• Trim-removal tools
• Torx / driver-bit set
• Padded door stand or lifting jack
• Panel protection and masking tape
• Multimeter or diagnostic equipment where required
• A second technician for safe handling

Estimated repair time: about 1.5 to 3.0 labour hours for removal, installation and alignment where the pictured assembly matches and no major component transfer or paint work is required. Allow 3 to 5 hours or more where glass, wiring, lock, mirror, trim or mechanisms require transfer. Paint preparation and blending are additional.

Fitting service: available subject to workshop capacity and prior arrangement through eBay Messages.

Fixed labour-only guide. Hourly rate is multiplied by estimated fitting time. Paint, materials, diagnostics, recovery, extra parts and taxes are excluded.

FREE UK POSTAGE where eBay checkout confirms the free domestic service for the delivery postcode.

International availability, postage cost, import charges and final eligibility are controlled by eBay at checkout. Size, weight, value and category restrictions can apply.

EU destinations currently listed within the programme: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Non-EU destinations currently listed within the programme: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, UAE, Ukraine, Uruguay, USA and Vietnam.

Checkout address: customers must ensure the delivery address is complete and correct before payment. The address cannot be changed after checkout. Cancel and reorder through eBay where an address correction is required.

Complete the fitment checks before installation. Any item sent back must be the same identifiable component and should be complete, unaltered, unpainted, securely packaged and in the condition received.

Where eBay permits, a refund deduction may be applied only for the actual loss in value caused by installation, damage, missing parts, alteration or inadequate packaging. It is not an automatic fitment charge and does not limit eBay buyer protection or statutory rights.

Professional fitting, paint, diagnostics, recovery and labour costs are not included in the part warranty unless expressly agreed through the eBay order.

Every order supports local jobs, specialist vehicle dismantling knowledge and the careful reuse of serviceable components. Choosing a pre-owned part helps extend the useful life of materials already manufactured and can reduce avoidable waste.

Please compare all eight actual item photographs, the original door and the fitment table before ordering.

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
     
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.