Kia Picanto TA 2011-2017 Rear Right Bumper Side Bracket OSR 866141Y000
Kia Picanto TA 2011-2017 Rear Right Bumper Side Bracket OSR 866141Y000
KIA PICANTO TA REAR RIGHT BUMPER SIDE MOUNTING BRACKET
Factory-manufactured used Kia component • Rear Right / OSR location
Why Buy From THEPARTPILOT?
Part Specification
| Specification | Details |
|---|---|
| Manufacturer | Kia |
| Manufacturer Part Number | 866141Y000 / 86614-1Y000 |
| Catalogue Description | Bracket Assembly – Rear Bumper Side RH |
| Vehicle Location | Rear Right / Offside Rear (OSR) |
| Component Type | Rear bumper side mounting / retaining bracket |
| Material | ABS-type moulded automotive plastic as specified in the source listing |
| Colour | Black |
| Condition | Used automotive component – inspect listing photographs for exact cosmetic condition |
This bracket sits at the right-hand rear corner of the vehicle and provides a locating and retaining interface for the rear bumper cover. Its job is primarily mechanical: it supports correct bumper-cover positioning, maintains the intended panel alignment and provides secure attachment at the bumper side.
Unlike an electronic module, this component does not directly control an electrical vehicle system. Its function is structural and positional within the rear bumper assembly.
Why Choose a Factory-Manufactured Used Part?
Bumper brackets may look simple, but their moulded profiles, locating tabs, clip positions and mounting geometry determine how correctly the bumper sits against the body.
- Designed around the vehicle manufacturer's original mounting geometry.
- Correct locating points help maintain bumper-to-body alignment.
- Correct moulded profiles reduce the risk of poorly aligned panel gaps.
- Reusing a serviceable factory component avoids unnecessary replacement-part manufacturing.
- Premium recycled components can save buyers up to 70% versus purchasing brand-new equivalents, depending on the component and current new-part price.
Similar-looking bumper retainers can have different tabs, mounting points and profiles. Compare 866141Y000 with your original component before ordering.
Compatibility & Fitment
Compatibility should be established from the vehicle VIN and the number on the original component. Do not rely solely on registration-based or automated compatibility selectors.
| Vehicle | Generation / Chassis | Catalogue Evidence | Position |
|---|---|---|---|
| Kia Picanto / Morning | TA | 866141Y000 is catalogued on TA-generation vehicles, including catalogue examples from 2012, 2013 and 2016. | Rear Right / RH / OSR |
The Picanto changed generation around 2017. A registration year alone is therefore not sufficient evidence of compatibility for vehicles near the changeover. VIN verification is strongly recommended.
Body Variant Check
Do not assume compatibility from appearance alone.
Confirm using VIN + 866141Y000.
Body style illustrations are identification aids only. They are deliberately not presented as a substitute for parts-catalogue verification.
Will Not Fit / Exclusion List
- Left-hand / nearside rear position — this listing is for the RH / OSR bracket.
- Vehicles requiring a different stamped manufacturer part number.
- Later Picanto JA-generation applications unless VIN-specific Kia catalogue data explicitly confirms 866141Y000.
- Any vehicle where the original bracket has different locating tabs, mounting points or profile.
- Do not select solely because the vehicle registration year appears similar.
Please verify the VIN and original stamped number before purchasing.
Where Does This Part Fit?
Technical reference placeholder — the bracket locates behind the right-hand side edge of the rear bumper cover.
Use the listing's high-resolution photographs to compare the tabs, screw/clip positions and moulded profile with the component removed from your vehicle.
Fitting Guide
Typical Tools Required
- Trim removal tools
- Suitable Phillips / cross-head screwdriver
- Small socket and ratchet set
- Extension bar where required
- Torx drivers if fitted to the particular vehicle
- Protective gloves
- Blanket or padded surface for the bumper cover
Typical Installation Procedure
1 Park securely, switch the ignition off and protect surrounding painted panels.
2 Remove the applicable rear bumper fasteners from the wheel-arch, lower edge and luggage-area/rear trim locations as required by the vehicle.
3 Carefully release the bumper-cover side from its retaining points. Do not force painted plastic.
4 Disconnect any bumper-mounted electrical connections where applicable before moving the cover away from the vehicle.
5 Identify the rear-right side bracket and compare the replacement directly with the removed component, including 866141Y000 where visible.
6 Remove the damaged bracket and inspect surrounding mounting points for collision distortion or broken fixings.
7 Install the replacement bracket using the correct existing/new serviceable fasteners.
8 Refit the bumper cover, ensuring its side edge engages cleanly with the bracket rather than being forced into position.
9 Reinstall all fasteners and reconnect equipment previously disconnected.
10 Check bumper alignment, panel gaps, retention and operation of any disturbed lamps/sensors before returning the vehicle to service.
Indicative Labour Cost Matrix
Allow approximately 0.5–1.0 labour hour as a general planning allowance for bumper access and bracket replacement where there are no seized fixings, accident damage or additional repairs. Actual workshop time varies.
| Labour Time | £40/hr | £60/hr | £80/hr | £100/hr |
|---|---|---|---|---|
| 0.5 hour | £20 | £30 | £40 | £50 |
| 0.75 hour | £30 | £45 | £60 | £75 |
| 1.0 hour | £40 | £60 | £80 | £100 |
Professional fitting may also be available at our repair facility, subject to workshop availability. Please use eBay Messages for enquiries before purchase.
Secure Shipping & Dispatch
Postage is not free. Buyers pay the shipping charge shown and calculated through the applicable eBay checkout service.
International orders may be shipped through the applicable eBay international / Global Shipping service where the listing and destination are eligible. Depending on availability, destinations can include the UK, Europe, USA, Canada, Australia and other supported regions.
Important: Customers must ensure their checkout address is correct prior to paying. Due to strict eBay Seller Protection regulations, we are entirely unable to alter or change your delivery address after purchase.
Ordering Correctly & Returns
Buyers are strongly encouraged to compare the supplied high-resolution item photographs and exact stamped manufacturer part number with their existing component rather than relying solely on automated vehicle/item-specific compatibility dropdowns.
Where a consumer return is accepted, the item should be returned in the same condition in which it was supplied and handled only as reasonably necessary to establish its nature, characteristics and suitability.
Where permitted by applicable law and eBay policy, any deduction from a refund will be limited to an amount properly attributable to diminished value caused by handling beyond what is reasonably necessary. We do not describe an arbitrary percentage as automatically applicable to every return.
Please check 866141Y000, side/location and VIN compatibility before installation to minimise incorrect orders and unnecessary returns.
Used Goods VAT Information
Where this used component is sold under the applicable VAT Margin Scheme for second-hand goods, VAT is accounted for on the seller's margin and is not separately identified as recoverable input VAT on the buyer's invoice.
Please refer to the invoice supplied for the VAT treatment applicable to the individual transaction.
We Buy Cars for Cash
Please use the appropriate eBay Business Seller Information/contact route where permitted for business enquiries.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.