Land Rover Discovery 3 L319 2005-2009 Radio Aerial Isolator XUE000020D 12950300
Land Rover Discovery 3 L319 Radio Aerial Isolator
Original Land Rover-labelled, Fuba-manufactured rear tailgate aerial-system isolator / suppression component. Exact photographed number: XUE000020D.
Do not order from registration year, engine size or the eBay compatibility checker alone. Match every character of the number on your removed part, the cable and connector style, mounting terminal, lead length and audio specification. The pictured unit is marked XUE 000 020 D and fuba 1 29 503 00.
No donor VIN is shown in the original listing. Therefore fitment is deliberately limited to the verified Discovery 3 / LR3 L319 model-year range below. For a vehicle-specific check, send the full 17-character VIN through eBay Messages before purchase.
Product identification
- Part type: radio aerial isolator / antenna trap or suppression circuit
- Exact number photographed: XUE000020D
- Base service number: XUE000020
- Supplier number: Fuba 1 29 503 00 / 12950300
- Catalogue illustration reference: 18K891
- Manufacturer marking: Land Rover / Fuba
- Country marking: Germany
- Construction: foam-covered suppression element, insulated lead, moulded connector and metal mounting/contact terminal
- Condition: used; age-related marks and surface wear are visible
- Supply: one pictured unit only; trim, fixings and other aerial modules are not included unless shown
The internal electrical construction has not been dismantled or independently measured. Supplier and service numbers are taken from the photographed label.
Actual item photographs
These are photographs from this eBay item, not catalogue renderings. Use them to compare the housing, cable, terminal and connector with your original part.
Where it fits and what it does
This component belongs to the vehicle's rear radio-aerial system. The Discovery 3 uses aerial elements integrated into rear/side glazing, together with boosters and suppression components. The XUE000020 service family is catalogued as a lower tailgate aerial isolator. Its purpose is to help manage the radio-frequency path and suppress unwanted electrical interference reaching the audio system.
Behind the lower tailgate trim
Reference vehicle: five-door Land Rover Discovery 3. The marker shows the general lower-tailgate access zone, not an exact fastener position. Vehicle image: Albp, Wikimedia Commons, public domain.
Parts compatibility chart
| Vehicle | Years / body | Status | Mandatory checks |
|---|---|---|---|
| Land Rover Discovery 3 L319 | Model years 2005-2009 5-door SUV |
Verified model range; conditional by build specification | Removed part must match XUE000020D, Fuba 1 29 503 00, connector, terminal, cable layout and audio configuration. |
| Land Rover LR3 L319 | Model years 2005-2009 5-door SUV |
Verified model family; conditional by market/build specification | Use VIN and exact label comparison. Market-specific radio systems can differ. |
| UK vehicle first registered in late 2004 | May be a 2005 model-year Discovery 3 | Check before ordering | Registration date is not proof. VIN/model year and the exact removed-part number must confirm the application. |
| Discovery 4 / LR4 | 2010-2016 catalogue family | Not advertised as confirmed fitment | The base number XUE000020 appears in a separate lower-tailgate catalogue, but XUE000020D interchange and audio specification have not been verified for this item. VIN/EPC confirmation is required. |
| Range Rover Sport L320 | Any year | No verified cross-reference | Do not assume fit because of shared platform components. |
Known exclusions: do not order when
Vehicle exclusion
No confirmed application has been established for Discovery 1, Discovery 2, Discovery Sport, Discovery 5, Defender, Freelander or Range Rover models. A similar appearance is not enough to establish compatibility.
Part exclusion
Do not order where the original unit has a different service number, different connector, different lead length, different mounting terminal or a different aerial/audio-system location. XUC-series and XUI-series aerial amplifiers are separate components and are not this isolator.
Possible symptoms of a failed or damaged unit
- Weak or intermittent AM/FM reception
- Static, buzzing or electrical interference
- Stations dropping out or requiring frequent retuning
- Reception changing when rear electrical equipment is operated
Diagnosis matters: similar symptoms can be caused by damaged heated-screen/aerial tracks, corroded terminals, loose coax connections, wiring faults, another aerial amplifier, the head unit or poor grounding. Confirm the failed component before replacement.
Why choose an original Land Rover-labelled used component?
The pictured part was made for the vehicle's original radio-aerial architecture. Correct impedance characteristics, cable length, connector geometry, terminal position and physical packaging matter in radio-frequency circuits. An unverified low-cost copy may physically resemble the part but can introduce poor fit, weak reception or additional interference.
♻️ A serviceable used original part can also be substantially cheaper than buying new. Actual savings vary by part, condition, availability and current new retail price, so compare like-for-like before purchase.
Fitting guide, tools and estimated time
Estimated replacement labour: approximately 0.5-1.0 hour after diagnosis. Broken trim clips, corrosion, previous repairs or further fault-finding can increase the time. This is a general guide, not a substitute for the correct workshop procedure for the vehicle VIN.
- Switch the ignition off, remove the key and follow the vehicle's electrical-isolation procedure where required. Preserve radio settings/codes where applicable.
- Open the upper and lower tailgates. Protect painted surfaces and the rear glass before removing trim.
- Use plastic trim tools to release the relevant lower-tailgate trim panel. Fastener type and position can vary by build, so do not force the panel.
- Photograph the original routing. Confirm the old label reads XUE000020D and compare the connector, metal terminal, cable length and body shape with the listing photographs.
- Disconnect the terminal/connector carefully and release the unit from its mounting position. Inspect nearby wiring, glass-aerial contacts and grounds for corrosion or damage.
- Install the replacement in the same orientation and routing. Ensure terminals are clean, secure and not trapped by the trim or tailgate mechanism.
- Refit all trim clips, restore electrical power if isolated, and test AM/FM reception with rear electrical equipment both off and on.
Exact fastener sizes and trim-removal sequence should be confirmed from VIN-specific workshop information. Stop if wiring, trim or glass contacts differ from the pictured application.
Static garage labour estimator
No JavaScript or active calculator is used. Multiply the garage's hourly labour rate by the actual booked time. Examples below are labour only and exclude diagnosis, parts, consumables and any taxes charged by the fitting garage.
| Garage rate | 0.5 hour | 0.75 hour | 1.0 hour |
|---|---|---|---|
| £50/hour | £25.00 | £37.50 | £50.00 |
| £75/hour | £37.50 | £56.25 | £75.00 |
| £100/hour | £50.00 | £75.00 | £100.00 |
| £125/hour | £62.50 | £93.75 | £125.00 |
| £150/hour | £75.00 | £112.50 | £150.00 |
Fitting and repair service: may be available subject to workshop capacity and prior agreement. Ask through eBay Messages before travelling or purchasing fitting.
Delivery, collection and order accuracy
Global Shipping Programme: worldwide availability is controlled by eBay and depends on the item and destination. Postage, import charges and delivery eligibility shown at checkout are the controlling information.
Checkout address: the order can only be dispatched to the delivery address supplied at eBay checkout. It cannot be manually changed after purchase; an incorrect address may require cancellation and a new order.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Returns, warranty and VAT information
Returns: handled under the return policy displayed on this eBay listing. Match the part number and photographs before ordering. Any returned item must be the same item, complete and in the same condition in which it was supplied. Where eBay permits, a refund deduction may be made only for actual loss in value when an item is returned used, altered, damaged or incomplete; there is no automatic fitment restocking charge.
Seller warranty: 30 days as stated in the listing. Warranty does not cover incorrect diagnosis, incompatible fitment, installation damage, modified parts or faults elsewhere in the vehicle.
VAT Global Accounting / margin arrangements: VAT is accounted for within the applicable margin scheme. No separate VAT amount is shown or reclaimable on this item.
Why buy from ThePartPilot?
Buying a tested, serviceable used component supports a local small business and reduces demand for new raw materials, manufacturing energy and unnecessary waste. Thank you for helping keep usable vehicle parts working for longer. 🚗♻️🌍