Land Rover Freelander 2 L359 06-12 RH Rear Door Quarter Glass 6H52-29740-AA 5DR
Land Rover Freelander 2 L359 06-12 RH Rear Door Quarter Glass 6H52-29740-AA 5DR
Land Rover Freelander 2 L359
RH Rear Door Fixed Quarter / Vent Glass
Used original manufacturer-branded rear door fixed glass assembly. Identified from the physical item rather than relying only on listing item specifics.
RIGHT HAND / OFFSIDE 5-DOOR L359 FIXED REAR-DOOR PANE 6H52-29740-AA🔍 Part Identification
The 43R marking visible on automotive glazing relates to the safety-glazing approval marking. It should not be relied upon as the Land Rover service part number. Match the physical mould/engineering code, tint specification and VIN instead.
📸 Actual Item Reference Photos
These are photographs from this eBay item and should be used to compare shape, frame design, mounting points, glazing shade and markings with the part already fitted to your vehicle.
🚙 Correct Vehicle & Where This Part Fits
This is the small fixed triangular pane positioned at the rear edge of the rear door, directly behind the main moving rear-door window.
It is NOT the large moving rear-door glass.
It is NOT the body-mounted quarter glass behind the rear door.
It is NOT the left-hand / nearside fixed pane.
This component is fixed in position. It does not contain a window motor, electrical switch or regulator and therefore does not electrically or mechanically “control” another vehicle function.
Its job is to complete the rear-door glazing aperture, provide visibility, maintain weather sealing and help preserve the correct glass/frame geometry of the door.
✅ Detailed Compatibility / Fitment Chart
| Vehicle | Production / VIN Range | Body / Position | Catalogue Reference Family | Status |
|---|---|---|---|---|
|
Land Rover Freelander 2 L359 |
Early production through VIN AH159248 |
5-door RH fixed rear-door glass Solar / applicable standard tint |
CVB500260 → LR012228 → LR044700 |
VIN + tint verification required |
|
Land Rover Freelander 2 L359 |
VIN AH159249 through VIN CH343513 |
5-door RH fixed rear-door glass Green / solar tint application |
LR012228 → LR044700 |
VIN + tint verification required |
|
Land Rover Freelander 2 L359 |
Privacy-glass applications including catalogue range to VIN AH161161 |
RH fixed rear-door glass Privacy specification |
CVB500110 → LR012229 |
DIFFERENT CATALOGUE FAMILY — DO NOT ASSUME FITMENT |
| Land Rover Freelander 2 L359 | After VIN CH343513 / later 2012-on production | RH rear fixed glass | Must be checked against VIN-specific catalogue data | NOT CONFIRMED BY THIS LISTING |
| Freelander 1 / first generation | All years | Any body style | Different vehicle platform | DOES NOT FIT |
| LR2-badged market vehicles | Any year | Must match VIN, side, tint and physical glass markings | Do not assume UK / European glass specification is identical | VIN CHECK REQUIRED BEFORE ORDERING |
Do NOT order this part if you need:
If you are unsure, send your full 17-character VIN and a clear image of your existing glass marking through eBay Messages before purchasing. We do not rely solely on eBay-generated item specifics when the physical part or VIN information provides a better check.
🧩 What You Are Buying
This is a used vehicle component, so normal age-related cosmetic marks may be present. Please study every actual item photograph before ordering.
The exact glazing construction and tint specification should be matched using the physical glass marking and VIN rather than guessed from colour on a computer or phone screen.
⚠️ When This Part May Need Replacing
- Cracked, fractured or shattered fixed glass.
- Chipped edge damage spreading into the pane.
- Damaged or distorted surrounding moulding/frame.
- Loose glass or rattling from the rear-door glazing area.
- Wind noise around the rear edge of the door.
- Water ingress caused by damaged glazing seals or frame components.
- Incorrect previous glass with visibly mismatched tint or mounting geometry.
- Accident or break-in damage to the rear door glazing assembly.
⭐ Why Choose a Matching Original Used Part?
When the VIN, side and glazing specification are correctly matched, an original manufacturer-branded used component offers the advantage of factory-developed dimensions, mounting geometry, edge profile and appearance.
Low-cost pattern replacements can sometimes differ in tint, moulding profile, hardware detail or overall finish. For a highly visible body/glazing component, matching the original physical specification can help preserve fit, appearance and sealing.
Buying a correctly identified used component also avoids manufacturing another replacement unnecessarily. On selected vehicle parts, buying used can offer savings of up to 70% compared with new replacement pricing. Actual saving varies according to the individual part and current new-part price.
🔧 Fitting Guide
Suggested Tools
- Protective gloves suitable for handling automotive glass.
- Eye protection.
- Plastic interior trim-removal tools.
- Appropriate Torx / driver set.
- Socket and ratchet set.
- Plastic glazing wedge or non-marring tool.
- Masking tape and protective covers for painted surfaces.
- Workshop manual / approved service information for exact fastener and torque data.
Typical Procedure Overview
Compare VIN, RH position, glass tint, physical shape and all visible markings.
Cover the door paint, interior trim and seat area. Wear gloves and eye protection.
Remove screws, handles/switch components and trim clips as specified by the workshop procedure.
Preserve it for refitting wherever possible so the rear door remains correctly sealed.
The moving window glass/run or dividing channel may need to be released or repositioned according to the vehicle workshop procedure.
Release the applicable retaining fasteners/channel and carefully withdraw the glass. Do not lever directly against an exposed glass edge.
Replace damaged ancillary components rather than forcing the replacement glass into a distorted frame.
Fit the replacement glass in the correct orientation and tighten all fasteners to the manufacturer's workshop specifications. No torque figures are guessed in this listing.
Refit the moving window/run, moisture barrier and door card. Test the moving rear window and check for correct alignment, rattles and water ingress.
Estimated Workshop Time
Planning estimate: approximately 1.0–2.0 labour hours. This is not an official manufacturer flat-rate time. Actual time depends on corrosion, trim condition, broken clips, previous repairs and workshop experience.
💷 Garage Labour Cost Calculator
No JavaScript is used. Find your garage's hourly rate and compare it against the estimated 1–2 hour labour window.
| Garage Labour Rate | 1.0 Hour | 1.5 Hours | 2.0 Hours |
|---|---|---|---|
| £50 / hour | £50 | £75 | £100 |
| £75 / hour | £75 | £112.50 | £150 |
| £100 / hour | £100 | £150 | £200 |
| £125 / hour | £125 | £187.50 | £250 |
| £150 / hour | £150 | £225 | £300 |
Labour figures are examples only and exclude any garage VAT, consumables, clips, additional repairs or diagnostic charges.
🛠️ Fitting Service Available
ThePartPilot can also provide fitting / repair services subject to availability. Please enquire through eBay Messages before travelling or purchasing if fitting is required.
📦 25,000+ Parts Held in Stock
ThePartPilot holds more than 25,000 vehicle parts in stock and on the shelf at any one time, helping us supply replacement components quickly while maintaining detailed identification information.
We focus on helping customers identify the correct component before ordering, because preventing a wrong order is better for the customer, the seller, transport networks and the environment.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
🌍 UK & International Delivery
UK delivery is offered according to the postage service displayed on this listing. International delivery may also be available where an eligible service and destination are shown to you by eBay at checkout.
📮 Please Check Your Delivery Address Before Paying
Customers must make sure the address selected during eBay checkout is complete and correct. We cannot manually redirect an order to a different delivery address after checkout.
If you notice an address error before dispatch, contact us immediately through eBay Messages. Cancellation and a new order using the correct checkout address may be required.
🧾 VAT / Global Accounting
Where applicable, eligible used goods are accounted for under the Global Accounting VAT margin scheme. VAT is therefore not shown separately as an individual VAT amount on the item invoice.
International buyers may still be responsible for import VAT, customs charges or duties imposed by the destination country or collected through the marketplace.
↩️ Returns & Correct Fitment
Our aim is to identify the correct part before it is ordered. Please use the compatibility chart above and ask us to verify your 17-character VIN if there is any uncertainty.
Returns are handled in accordance with the return terms displayed by eBay, applicable eBay policy and your statutory rights.
A restocking fee is not charged simply because a buyer opens a return. Where eBay seller protections apply and an item is returned used, altered, incomplete or damaged compared with the condition originally supplied, eBay may permit an appropriate deduction for the actual loss in value.
Please therefore do not fit, modify, mark or damage a part while checking it if you believe you may need to return it.
♻️ Support a Small Business & Reuse Quality Car Parts
Thank you for supporting an independent automotive parts business. ❤️
Choosing a serviceable used component gives an existing part another useful life, reduces unnecessary disposal and can reduce demand for manufacturing and transporting a completely new replacement. 🌍♻️🚗
It also helps keep repair costs sensible while preserving usable components that might otherwise be discarded.
📦 Carefully Picked, Packed & Dispatched
Glass components require careful handling and packaging. Orders are checked against the sold item, protected appropriately and prepared for the delivery service selected on the order.
✓ Confirm you need the RIGHT-HAND rear door fixed triangular pane.
✓ Compare the physical shape with the actual item photos.
✓ Compare your existing glass markings and tint.
✓ Check the VIN range.
✓ If unsure, send the full 17-character VIN through eBay Messages.
✓ Make sure your checkout delivery address is correct.
Correct identification before purchase helps prevent delays, unnecessary returns and repeat repair work.