Mercedes-Benz Atego 818 Passenger N/S/F Behind Fuse Box Electrical Module

Mercedes-Benz Atego 818 Passenger N/S/F Behind Fuse Box Electrical Module

£23.53
Skip to product information
Mercedes-Benz Atego 818 Passenger N/S/F Behind Fuse Box Electrical Module

Mercedes-Benz Atego 818 Passenger N/S/F Behind Fuse Box Electrical Module

£23.53
TP
THEPARTPILOT
USED VEHICLE PARTS • FITMENT-FIRST LISTINGS
Mercedes-Benz Atego 818 • Passenger / N/S/F • Behind Fuse Box • Electrical Module
⚠ IMPORTANT — FITMENT MUST BE VERIFIED BEFORE ORDERING
The available photographs identify this component as removed from a Mercedes-Benz Atego 818 and marked N/S/F / passenger side, behind the fuse-box area. The exact donor year and manufacturer part number are not visible in the current listing. For this reason, no unverified year range or additional vehicle application is being claimed.
Before ordering, compare the original component's number, connector layout, mounting points and vehicle VIN. If unsure, contact us through eBay before purchase for a fitment check.
Mercedes-Benz Atego 818 Passenger-Side Behind-Fuse-Box Electrical Module
Used factory-fit component removed from an Atego 818. Supplied as photographed. Please use the photographs as part of your identification process.
📸 ACTUAL PART — REFERENCE PHOTOGRAPHS
Mercedes-Benz Atego 818 passenger N/S/F behind fuse box electrical module actual part
THEPARTPILOT
Atego 818 electrical module housing and mounting points reference image
THEPARTPILOT
Mercedes Atego electrical module multi pin connector reference photograph
THEPARTPILOT
Photograph 1 carries the breaker identification: Mercedes Atego 818 — N/S/F — Behind Fuse Box Module.
📍 WHERE THE PART IS FITTED
The breaker marking places this component in the passenger / nearside-front area behind the fuse-box section of the cab.
ATEGO CAB PASSENGER / N/S/F FUSE-BOX AREA MODULE BEHIND BOX
A third-party vehicle photograph has intentionally not been embedded. Use of an unrelated Atego generation or unlicensed manufacturer photograph could both misrepresent fitment and create image-rights issues.
✅ VEHICLE COMPATIBILITY / FITMENT CHART
Vehicle Years Status Required Check
Mercedes-Benz Atego 818 Exact years not yet verified Donor/model marking verified VIN + exact original part number + connector/mounting match
Other Mercedes-Benz Atego variants Not stated NOT CONFIRMED Do not order until VIN/part-number cross-reference confirms application
Actros / Axor / Vario / Sprinter All NOT CONFIRMED Do not purchase because the connector or housing looks similar
Any other vehicle All NOT CONFIRMED Full VIN/part-number confirmation required
BUY THE CORRECT PART FIRST TIME: Vehicle model alone is not enough for an electrical component. The safest check is the vehicle VIN together with the complete number on the removed component and a connector/mounting comparison.
🔎 PART NUMBER IDENTIFICATION
Manufacturer part number: NOT VERIFIED FROM THE CURRENT PHOTOGRAPHS.
Do not buy solely because your vehicle is an Atego 818. Before ordering, compare every character of the number on your existing unit. Also compare the multi-pin connector keying, terminal layout, mounting-hole positions and housing profile shown in the photographs.
⚡ WHAT THIS COMPONENT DOES

This is an electrical component located behind the passenger-side fuse-box area. Its exact circuit assignment can vary with vehicle specification and must be confirmed against the donor/recipient VIN and the appropriate Mercedes-Benz wiring information.

We therefore do not claim that this component controls a specific engine, lighting, braking or body circuit until the exact part number and vehicle application have been verified. This reduces the risk of incorrect diagnosis and unnecessary part replacement.

🧱 CONSTRUCTION & CONDITION

Visible construction consists of a moulded black plastic electrical housing, multi-pin metal electrical terminals and reinforced mounting points/inserts.

This is a used component. Cosmetic marks, dust, storage marks and normal evidence of previous installation may therefore be present. Study all photographs carefully because the pictured item represents the supplied part.

🛠 POSSIBLE FAULT SYMPTOMS

Depending on the exact circuit served by the original unit, a failed electrical module in this area may be associated with intermittent or absent operation of connected circuits, electrical warning messages or stored diagnostic fault codes.

These symptoms do not prove that this module is faulty. Check the relevant fuse, power supply, earth points, harness, connector condition and diagnostic fault information before replacing electrical components.
🏆 WHY CHOOSE A FACTORY-ORIGINAL USED PART?

Where the part number is an exact match, a factory-original used component retains the connector geometry, mounting design and electrical specification intended for the vehicle. Very cheap pattern copies can vary in housing quality, connector tolerances and internal construction.

Buying a serviceable used component can also save as much as 70% compared with buying new, depending on the particular part, availability and current new-part retail price.

🔧 FITTING GUIDE
1. Confirm the replacement part number and VIN application before dismantling the vehicle.
2. Follow the correct workshop procedure to isolate the vehicle's electrical supply before disconnecting electrical components.
3. Gain access to the passenger-side / N/S/F fuse-box area and locate the module behind the fuse-box assembly.
4. Photograph or record the original connector position before removal.
5. Release the electrical connector locking mechanism carefully. Do not pull on the wiring.
6. Remove the fitted mounting fasteners using the appropriate tool for the specific truck.
7. Compare the old and replacement units side-by-side: number, terminals, connector keying, housing and mounting points must agree.
8. Install without forcing the connector or mounting points.
9. Restore the electrical supply using the correct workshop procedure.
10. Carry out a functional test and diagnostic scan where appropriate.
Electrical diagnosis and installation should be performed by a competent technician. Coding, adaptation or diagnostic procedures may be necessary depending on the exact vehicle/component specification.
🧰 TYPICAL TOOLS REQUIRED
✓ Suitable socket / driver set for the vehicle's fitted fasteners
✓ Non-damaging trim tools where trim removal is necessary
✓ Suitable insulated hand tools
✓ Inspection light
✓ Multimeter for electrical diagnosis where appropriate
✓ Professional diagnostic scan equipment where required
Exact fastener sizes and diagnostic requirements vary by vehicle specification and are intentionally not guessed here.
⏱ ESTIMATED LABOUR PLANNING

A reasonable planning allowance for accessing and exchanging a small behind-dash electrical module is approximately 0.5–1.0 labour hour once the correct unit and access procedure have been established. This is a planning estimate only — not a Mercedes-Benz flat-rate time. Diagnosis, seized/awkward trim, wiring repairs, coding or programming may increase the time required.

Garage labour estimate = hourly labour rate × labour hours
Garage Rate 0.5 Hour 1.0 Hour
£60 / hour £30 £60
£80 / hour £40 £80
£100 / hour £50 £100
£120 / hour £60 £120
🔧 FITTING & REPAIR SERVICE

A fitting / repair service may be available subject to workshop availability and successful fitment verification. Please enquire through eBay before purchase if fitting is required.

📦 25,000+ PARTS IN STOCK

ThePartPilot carries more than 25,000 vehicle parts on the shelf at any one time, helping us dispatch replacement components quickly and keep vehicles moving.

🏭
WAREHOUSE STOCK
Shelved & ready
🔧
WORKSHOP SUPPORT
Subject to availability
📦
CAREFUL DISPATCH
Packed for transit

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

🌍 INTERNATIONAL DELIVERY — EBAY GLOBAL SHIPPING PROGRAMME

International delivery is available to eligible destinations through eBay's Global Shipping Programme. Final availability, shipping charge, import charges and delivery options are determined by eBay at checkout.

EU destinations:
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

Non-EU destinations:
Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.

Destination eligibility can depend on the item, category, dimensions, value and eBay programme restrictions. The options displayed by eBay at checkout take precedence.

🏠 CHECK YOUR DELIVERY ADDRESS BEFORE PAYMENT

Customers must make sure the delivery address selected at eBay checkout is complete and correct before paying. We cannot manually substitute a different delivery address after an eBay order has been placed.

↩ RETURNS & WRONG-PART PREVENTION

The current eBay listing provides a 30-day return period. The return policy displayed by eBay on the live listing at the time of purchase takes precedence.

Our priority is to prevent unnecessary returns by providing photographs, location information and a clear fitment-verification process. If you are unsure whether this component fits, ask for a fitment check before ordering.

VIN + exact part number + connector configuration + mounting configuration = the strongest identification method.
£ VAT / GLOBAL ACCOUNTING

Where this item is sold under the Global Accounting VAT margin scheme, VAT is not shown separately on the sale. Applicable invoice/accounting treatment follows the scheme requirements.

♻️ SUPPORT A SMALL BUSINESS • REUSE QUALITY PARTS

Choosing a serviceable used component gives an existing part another working life rather than immediately replacing it with a newly manufactured component. Reuse helps reduce unnecessary waste and makes existing vehicle components useful for longer.

Every order also supports an independent UK vehicle-parts business. Thank you for choosing ThePartPilot. 💛

📦 ✈️ 🚚
CHECKED • PACKED • DISPATCHED
Secure packaging • UK collection available • International eBay shipping where eligible
THEPARTPILOT • THEPARTPILOT • THEPARTPILOT

You may also like