Mercedes C-Class W204 Saloon 2007-2014 Rear Left N/S Bumper Bracket A2048800330
Factory-fit rear left bumper side guide for the 4-door W204 saloon. It mounts behind the left rear bumper corner, between the bumper cover and the left rear quarter-panel edge, helping the bumper locate securely and maintain the correct panel gap.
|
Actual item – full shape and mounting points
|
Actual item – reverse face and clip layout
|
| Manufacturer | Mercedes-Benz |
| Vehicle | C-Class |
| Chassis / body | W204 4-door saloon only |
| Exact platform years | 2007-2014 – pre-facelift and facelift W204 saloon |
| Position | Rear left / UK nearside / passenger side on UK right-hand-drive vehicles |
| Part type | Rear bumper side guide, retainer, locating rail and mounting bracket |
| Primary part number | A2048800330 |
| Interchange formats | A 204 880 03 30 / 2048800330 |
| Superseded / replacement number | Factory parts source states A2048800330 replaces A257880520028. Confirm by VIN before using the replacement reference alone. |
| Material / finish | Moulded black plastic with integrated locating clips and mounting points |
| Approx. size / weight | 45 × 6 × 5 cm / 0.077 kg |
| Connector / pin count | Not applicable – non-electrical component |
| Included | 1 × rear left bumper guide bracket as photographed. Fixings are not included unless clearly shown. |
| Colour / markings | Black plastic. White stock-identification writing is visible in the actual-item photographs. |
| Seller warranty | 30 days, subject to the terms displayed on the eBay listing. |
| Condition | Previously fitted part. Cosmetic storage and removal marks may be present; inspect every actual-item photo before ordering. |
The following 204.0xx saloon codes are listed against part number A2048800330. Engine and trim availability varies by country, so the chassis code, body style and VIN remain the strongest checks.
| Model code | Factory-listed model |
|---|---|
| 204002 | C 220 CDI BlueEFFICIENCY saloon |
| 204006 / 204007 | C 200 CDI saloon |
| 204008 | C 220 CDI saloon |
| 204022 | C 320 CDI saloon |
| 204025 | C 350 CDI BlueEFFICIENCY saloon |
| 204041 | C 200 Kompressor saloon |
| 204044 / 204045 / 204046 | C 180 Kompressor / BlueEFFICIENCY saloon |
| 204047 | C 250 CGI BlueEFFICIENCY saloon |
| 204049 | C 180 saloon |
| 204052 | C 230 saloon |
| 204054 | C 280 saloon |
| 204056 / 204065 | C 350 / C 350 CGI BlueEFFICIENCY saloon |
| 204077 | C 63 AMG saloon |
| 204081 | C 300 4MATIC saloon |
| 204087 | C 350 4MATIC saloon |
| 204089 | C 350 CDI 4MATIC saloon |
|
2007-2011 pre-facelift example
The guide sits behind the vehicle's left rear bumper corner, beside the rear wheel arch and quarter panel.
|
2011-2014 facelift example
This is a hidden mounting component; it is normally covered by the bumper skin after installation.
|
| S204 estate / 5-door | Not confirmed by the factory model-code list applied to this description. |
| C204 coupe / 2-door | Different body and bumper-side mounting arrangement. |
| W205 saloon | Later chassis generation; not compatible. |
| Rear right / UK offside | This listing is for the left side only. The opposite side uses a different component. |
| Different number or clip layout | Do not order when your original number, curve, mounting holes or clip positions differ. |
| • Left bumper corner sits proud, low or uneven | • Bumper edge repeatedly pops out of position |
| • Rattle or movement near the left rear wheel arch | • Uneven gap between bumper and quarter panel |
| • Broken, missing or distorted locating clips | • Damage after a parking knock or bumper removal |
Replacing a damaged guide helps restore the correct bumper location and reduces movement, paint rubbing and repeated clip release. This guide is not the crash beam or impact reinforcement.
Factory-fit parts retain the intended curvature, clip spacing, hole locations and material stiffness for the vehicle. A low-cost pattern copy may require adjustment, may sit unevenly or may not hold the bumper edge securely. Reusing an original-production component can also offer substantial savings compared with purchasing new while keeping a serviceable component in circulation.
| Estimated technician time | 0.5-1.0 labour hour, depending on access, fastener condition and whether the bumper needs full removal. |
| Suggested tools | Plastic trim-clip tool, Torx T20/T25/T30 set, 8 mm and 10 mm sockets, ratchet, screwdriver, masking tape, gloves and safe vehicle support where required. |
| Skill level | Intermediate body-trim repair. Professional fitting is recommended if you are unfamiliar with bumper removal. |
- Park safely, switch the ignition off, open the boot and protect the painted bumper and quarter-panel edges with masking tape.
- Remove the left rear wheel-arch screws/clips and the relevant lower bumper fixings. Access to boot trim or rear-lamp fixings may be required depending on vehicle specification.
- Support the bumper corner and release it gently from the damaged guide. Do not pull sharply because wiring for parking sensors or other bumper equipment may be present.
- Remove the old guide. Compare the part number, curve, mounting holes and clip layout with the replacement before installation.
- Install the replacement guide without forcing alignment. Use vehicle-manufacturer repair information for fastener torque where specified.
- Engage the bumper edge evenly into the guide, check the panel gap, then refit all screws, clips and trim.
- Check that the bumper is secure, no wiring is trapped and no rattle or movement remains.
Ask through eBay Messages before travelling or purchasing fitting arrangements.
Estimated labour charge = garage hourly rate × 0.5-1.0 hour. Parts, VAT, diagnostics, broken fasteners and extra work are not included.
| Garage rate | 0.5 hour | 1.0 hour |
|---|---|---|
| £50/hour | £25 | £50 |
| £70/hour | £35 | £70 |
| £90/hour | £45 | £90 |
| £110/hour | £55 | £110 |
| £130/hour | £65 | £130 |
| ✓ | Confirm your car is a W204 4-door saloon, 2007-2014. |
| ✓ | Confirm you need the rear left / UK nearside guide. |
| ✓ | Match A2048800330 or A 204 880 03 30 to your removed part. |
| ✓ | Compare the full curve, mounting holes, tabs and clip positions with the actual-item images. |
| ✓ | When uncertain, send the registration or VIN plus a clear photo of your original part through eBay Messages before ordering. |
|
Fitting and repair service
Available subject to workshop capacity and prior arrangement through eBay Messages.
|
Large parts inventory
More than 25,000 vehicle parts stocked and shelved at any one time.
|
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Every order supports a specialist local parts business, skilled vehicle dismantling and the reuse of serviceable components. Choosing a recycled part helps reduce waste, lowers demand for newly manufactured material and gives an existing component another useful life. Thank you for supporting ThePartPilot. 🔧 ♻ 📦