MERCEDES CLK 230K C208 W208 1997-2002 2DR LEFT EXTERIOR DOOR HANDLE CARRIER

MERCEDES CLK 230K C208 W208 1997-2002 2DR LEFT EXTERIOR DOOR HANDLE CARRIER

£24.66
Skip to product information
MERCEDES CLK 230K C208 W208 1997-2002 2DR LEFT EXTERIOR DOOR HANDLE CARRIER

MERCEDES CLK 230K C208 W208 1997-2002 2DR LEFT EXTERIOR DOOR HANDLE CARRIER

£24.66
THEPARTPILOT
VEHICLE PARTS • FITMENT SUPPORT • UK BUSINESS SELLER
25,000+ PARTS STOCKED • 30 DAY WARRANTY • FITTING SERVICE AVAILABLE
C208 COUPÉ GENERATION 1997-2002

MERCEDES-BENZ CLK 230 KOMPRESSOR

C208 / W208 1997-2002
LEFT EXTERIOR DOOR HANDLE CARRIER / HOLDER BRACKET
✓ CONFIRMED DONOR VEHICLE YEAR: 2000
Mercedes-Benz CLK 230 Kompressor • C208 / W208 • 2-Door Coupé • LEFT Door
⚠️ IMPORTANT 1997-2002 FITMENT INFORMATION

1997-2002 is the Mercedes CLK C208 Coupé generation range. The actual component in this listing is confirmed as coming from a 2000 CLK 230 Kompressor.

Mercedes made production changes during the C208 lifecycle and 2000 itself was a changeover period. No readable manufacturer part number has been verified from the photographed carrier. For this reason buyers should compare the shape, mounting points, spring arrangement and LEFT-hand orientation before ordering.

ACTUAL PART PHOTOGRAPHS

Compare your existing carrier carefully with the actual part shown below. These images are especially important because a readable manufacturer identification number has not been verified.

Mercedes CLK C208 W208 1997 2002 left door handle carrier holder actual part
ACTUAL ITEM • CARRIER / MECHANISM VIEW
Mercedes CLK 230K C208 W208 left exterior door handle mounting carrier actual item
ACTUAL ITEM • FULL SHAPE / MOUNTING VIEW

🚗 CORRECT VEHICLE BODY STYLE REFERENCE

Reference photographs show a Mercedes-Benz CLK C208 2-door Coupé body style. These are reference vehicle photographs only and are not the donor vehicle.

Mercedes Benz CLK C208 W208 two door coupe reference vehicle
C208 / W208 2-DOOR COUPÉ
Reference body style
Mercedes Benz CLK C208 W208 coupe rear side reference
C208 COUPÉ SIDE / REAR REFERENCE
2-door body configuration
Vehicle reference images: M 93 / Wikimedia Commons • CC BY-SA 3.0. Reference photographs are for body-style identification only.

📍 WHERE DOES THIS PART FIT?

VEHICLE LEFT-HAND DOOR
BEHIND THE EXTERIOR DOOR HANDLE
INSIDE THE DOOR SHELL

This carrier sits behind the exterior pull handle. It supports and positions the handle mechanism and helps transfer movement from the exterior handle towards the door-latch release mechanism.

LEFT SIDE EXPLAINED:
LEFT means the vehicle's left-hand side when seated inside the vehicle and facing forwards. On a UK right-hand-drive vehicle this will normally be the passenger / nearside.

ITEM DETAILS & SPECIFICATIONS

Brand Mercedes-Benz
Vehicle Model CLK 230 Kompressor
Chassis / Generation C208 / commonly searched as W208
Generation Years 1997-2002 C208 Coupé generation
Confirmed Donor Year 2000
Body Style 2-Door Coupé
Part Type Exterior door handle carrier / holder / mounting bracket
Placement LEFT exterior door
Manufacturer Part Number No readable Mercedes-Benz manufacturer number verified from the item photographs. Current eBay listing records Manufacturer Part Number as “Does not apply”.
Interchange Part Number No manufacturer interchange number confirmed from the photographed item.
Superseded Part Number No confirmed superseded manufacturer number verified.
Visible Construction Black moulded polymer/composite carrier with visible metal spring and fastening components.
Colour / Colour Marking Black carrier. Compare all visible markings and moulding features with your original part.
Condition Pre-owned previously fitted component. Please inspect the actual photographs for condition.
Warranty 30 Days
eBay Item Number 147489202662
VAT Sold under the applicable VAT Margin Scheme / Global Accounting arrangements. VAT is not separately itemised and no reclaimable VAT invoice is available.

1997-2002 CLK 230 KOMPRESSOR YEAR GUIDE

Mercedes-Benz records show more than one CLK 230 Kompressor production specification during the C208 lifecycle. This is why the year alone must not replace a physical part comparison.

MODEL TYPE PRODUCTION PART STATUS
CLK 230 Kompressor 208.347 1997-1999 ⚠ VISUAL PART COMPARISON REQUIRED
CLK 230 Kompressor 208.347 08/1999-06/2000 ✓ 2000 DONOR FALLS WITHIN THIS CHANGEOVER PERIOD
CLK 230 Kompressor EVO 208.348 05/2000-05/2002 ⚠ VISUAL PART COMPARISON REQUIRED
WHY 2000 NEEDS EXTRA CARE: the earlier 208.347 and later 208.348 versions overlap during 2000. Your registration year therefore does not by itself prove which mechanical revision is installed.

VEHICLE COMPATIBILITY TABLE

We would rather show a narrower accurate compatibility guide than encourage a wrong order. Other C208 engines may use visually similar components, but no additional engine/model is being described as confirmed without a readable manufacturer part number.

VEHICLE YEARS BODY SIDE FITMENT STATUS
Mercedes CLK 230 Kompressor C208 2000 2-Door Coupé LEFT ✓ CONFIRMED DONOR APPLICATION
CLK 230 Kompressor C208 1997-1999 2-Door Coupé LEFT ⚠ COMPARE ORIGINAL PART FIRST
CLK 230 Kompressor C208 2001-2002 2-Door Coupé LEFT ⚠ COMPARE ORIGINAL PART FIRST
CLK 200 / CLK 200 Kompressor C208 C208 generation Coupé LEFT NOT CONFIRMED FROM PART NUMBER
CLK 320 / CLK 430 / CLK 55 AMG C208 C208 generation Coupé LEFT NOT CONFIRMED FROM PART NUMBER
CLK Cabriolet A208 A208 generation Convertible ✗ DO NOT ASSUME FITMENT
CLK C209 / A209 Later generation Coupé / Cabriolet ✗ DIFFERENT GENERATION
Any RIGHT-hand door Any Any RIGHT ✗ WRONG SIDE

✅ BUY THE CORRECT PART FIRST TIME

✓ Confirm your vehicle is a Mercedes CLK C208 2-door Coupé.
✓ Confirm you require the LEFT-hand exterior door mechanism.
✓ Compare the overall carrier length and moulded frame shape.
✓ Compare every fixing hole and locating tab.
✓ Compare the metal spring positions and direction.
✓ Compare the linkage/contact points.
✓ Check for production differences on cars registered during 2000.
✓ If uncertain, send clear photographs of your existing mechanism through eBay Messages before ordering.

WHAT DOES THE DOOR HANDLE CARRIER DO?

The exterior door handle carrier is the structural mounting mechanism positioned inside the door directly behind the exterior pull handle. Its purpose is to keep the handle assembly correctly aligned and support the mechanical movement used when the outside handle is pulled.

The carrier works together with the exterior handle, spring arrangement and door-latch linkage. When the handle is pulled, movement is transferred through the mechanism towards the latch so the door can release.

Correct geometry is important. If the carrier becomes cracked, distorted, excessively worn or loses correct spring tension, the exterior handle may no longer transfer enough movement to the latch.

🔧 POSSIBLE SYMPTOMS OF A FAULTY CARRIER

🔧 Exterior door handle feels loose or excessively flexible.
🔧 Handle travels further than normal before operating the latch.
🔧 Handle fails to return smoothly after being released.
🔧 Door intermittently fails to open from outside.
🔧 Handle appears incorrectly aligned in the door.
🔧 Clicking or unusual movement behind the handle.
🔧 Broken or cracked moulded mounting point.
🔧 Damaged or displaced return spring.

Important diagnostic note: similar symptoms may also result from a damaged exterior handle, door latch, linkage rod/cable, lock assembly or incorrect adjustment. Inspect the mechanism before ordering rather than replacing a component based only on symptoms.

WHY CHOOSE A VEHICLE-ORIGINAL FACTORY COMPONENT?

CORRECT GEOMETRY

The original vehicle component was designed around the factory door, handle, mounting points and latch geometry.

PROVEN FITMENT

Matching a serviceable vehicle-original part against the removed component can avoid the dimensional differences sometimes encountered with low-cost pattern replacements.

BETTER VALUE

A good pre-owned component can offer substantial savings compared with buying the equivalent component new. Actual savings depend on the part and current new-part availability.

🔧 GENERAL FITTING INSTRUCTIONS

1. Park the vehicle safely, switch off the ignition and protect the surrounding paint and trim.
2. Raise the window if required to maximise access inside the door.
3. Remove the interior door trim/card carefully using suitable trim tools.
4. Disconnect any electrical connectors attached to the trim panel where required.
5. Carefully release the moisture membrane sufficiently to access the exterior handle mechanism.
6. Photograph the original carrier, springs and linkage before dismantling.
7. Disconnect the relevant linkage rod/cable from the handle mechanism.
8. Remove the appropriate carrier fasteners while supporting the mechanism.
9. Place the removed carrier beside this replacement and compare side, length, spring position, mounting holes and locating tabs.
10. Install the replacement carrier and reconnect the linkage.
11. Operate the exterior handle several times and ensure it returns correctly.
12. Test the door opening and locking operation before refitting the interior trim.
13. Correctly reseal the moisture membrane and reinstall the door card and fixings.
Important: fitting procedures and fastener arrangements can vary according to production specification. This is a general fitting guide and is not a substitute for manufacturer workshop information. If you are not confident, use a competent automotive technician.

🧰 TOOLS YOU MAY REQUIRE

Plastic trim removal tools Torx bit set 1/4" ratchet Socket set Small screwdriver Pick / hook tool Work light Protective tape Magnetic parts tray Protective gloves

⏱ ESTIMATED REPAIR TIME & GARAGE LABOUR CALCULATOR

General estimated workshop time: approximately 0.75 to 1.25 hours. Actual labour time depends on trim condition, seized fasteners, previous repairs and workshop procedure.

GARAGE RATE 45 MIN / 0.75 HR 60 MIN / 1 HR 75 MIN / 1.25 HR
£50 / hour £37.50 £50.00 £62.50
£60 / hour £45.00 £60.00 £75.00
£75 / hour £56.25 £75.00 £93.75
£90 / hour £67.50 £90.00 £112.50
£100 / hour £75.00 £100.00 £125.00
£120 / hour £90.00 £120.00 £150.00

Estimated labour figures are illustrative only and do not represent a quotation from ThePartPilot or any individual workshop.

🔧 FITTING & REPAIR SERVICE
SUBJECT TO TECHNICIAN & WORKSHOP AVAILABILITY

ThePartPilot may be able to provide fitting or automotive repair assistance subject to availability.

Please enquire through eBay Messages before making travel arrangements.

Automotive mechanic repair reference image
Illustrative automotive repair image only — not ThePartPilot premises. Image: Azorbli / Wikimedia Commons • CC BY-SA 4.0.

🏭 MORE THAN 25,000 PARTS IN STOCK

ThePartPilot stocks more than 25,000 vehicle parts on the shelf at any one time, helping customers keep older vehicles on the road and providing alternatives when new components are expensive or difficult to source.

Large small parts warehouse stock reference image
Illustrative warehouse reference image only — not ThePartPilot premises. Image: Andreas Praefcke / Wikimedia Commons • CC BY 3.0.
📦
CAREFUL PACKING

Parts are prepared and protected appropriately for dispatch.

🔎
FITMENT SUPPORT

Send photographs through eBay Messages if you need help comparing a component.

♻️
PART REUSE

Keeping serviceable components in circulation helps reduce avoidable automotive waste.

🌍 UK & INTERNATIONAL SHIPPING

This listing participates in eBay's Global Shipping Programme. Eligible international buyers will see available postage, import charges and delivery information through eBay at checkout.

EU GSP DESTINATIONS

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.

NON-EU GSP DESTINATIONS

Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.

IMPORTANT: destination eligibility, international postage price, customs rules and import charges are controlled by eBay and the delivery options shown at checkout always take priority.
📍 CHECK YOUR EBAY DELIVERY ADDRESS BEFORE PAYMENT

Please ensure the delivery address selected during eBay checkout is complete and correct before placing the order. We cannot simply substitute a different delivery address after checkout. If you discover an address error, contact us through eBay Messages as quickly as possible.

RETURNS & FITMENT

Return period: 30 days in accordance with the return information shown on this eBay listing.

Buyers should compare all photographs, vehicle information, side and physical mounting details before fitting.

If you are unsure whether the part matches your vehicle, please contact us through eBay Messages before ordering. Photographs of your original component are particularly helpful.

No blanket restocking fee is stated. Returns are handled in accordance with eBay rules and applicable consumer rights.

Where eBay seller protections apply and a returned component has suffered an actual reduction in value because it has been fitted, altered, damaged, made incomplete or returned in materially different condition, any permitted deduction will be handled only in accordance with the applicable eBay rules.

VAT INFORMATION

Eligible second-hand goods are sold under the applicable VAT Margin Scheme / Global Accounting arrangements. VAT is not separately itemised and no reclaimable VAT invoice is available.

🚗 💙 ♻️ 📦 🔧

THANK YOU FOR SUPPORTING A LOCAL SMALL BUSINESS

Every order supports ThePartPilot and helps keep useful vehicle components in circulation. Reusing a serviceable automotive part can extend its working life, reduce unnecessary disposal and reduce the need to manufacture and transport a replacement component when an existing part can continue doing the job.

We appreciate customers taking the time to compare the photographs and fitment information carefully. Getting the right component first time saves everybody time, postage, packaging and unnecessary returns.

⚠️ FINAL FITMENT CHECK BEFORE ORDERING

Mercedes CLK C208 / W208 Coupé generation: 1997-2002

Confirmed donor vehicle: 2000 CLK 230 Kompressor 2-Door Coupé

Placement: LEFT exterior door

1997-2002 is displayed to identify the C208 Coupé generation. Because a readable manufacturer part number is not present, buyers outside the confirmed 2000 donor application must compare the actual carrier before ordering.

WhatsApp QR for Fitment Help / Appointment Enquiries 

Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.       
      
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.  
THEPARTPILOT
PARTS • KNOWLEDGE • FITMENT SUPPORT
eBay Item 147489202662
Static HTML only • No JavaScript • No active content

You may also like