Mercedes GLA H247 2020-2025 5DR Tailgate Boot Lid Silver A2477408400 Free P&P
Mercedes GLA H247 2020-2025 5DR Tailgate Boot Lid Silver A2477408400 Free P&P
Mercedes GLA H247 2020-2025 5DR Tailgate Bootlid Silver A2477408400
Complete rear tailgate / boot lid assembly in silver metallic, photographed with rear glass, upper spoiler, high-level brake lamp, rear wiper arm, Mercedes star and GLA 200d badge. This listing is for the exact assembly shown in the photographs.
Item Details & Engineering References
| Detail | Verified / Buyer Guidance |
|---|---|
| eBay Item Number | 147494236971 |
| Vehicle Make | Mercedes-Benz |
| Vehicle Model | GLA-Class, second generation, chassis / body code H247 |
| Exact Body Style | 5-door compact SUV only |
| Confirmed Model Years | 2020, 2021, 2022, 2023, 2024 and 2025 — subject to matching the original part number and equipment |
| Part Description | Rear tailgate / liftgate / boot lid assembly with bonded rear glass |
| Manufacturer Part Number | A2477408400 |
| Interchange Part Number | 2477408400 / 247-740-84-00 |
| Superseded Part Number | No confirmed superseded number verified |
| Cross-Model Interchange | No other Mercedes-Benz model is confirmed. B-Class W247 is specifically excluded. |
| Placement | Rear — hinged at the roof aperture and latched at the lower rear body opening |
| Colour Marking | Silver metallic by visual inspection. The exact paint code is not visible or verified; allow for paint matching, preparation or refinishing. |
| Visible Construction | Steel outer/inner tailgate structure, bonded automotive rear glass, plastic upper spoiler/trim, rubber seals and attached electrical/mechanical parts where photographed |
| Donor Identification Visible | GLA 200d badge is present in the item photographs |
| Condition | Pre-owned body assembly. Expect age, storage and handling marks. Study every photograph at full size before ordering. |
| VAT Information | Sold under the VAT margin / Global Accounting Scheme where applicable. VAT is not separately itemised and no reclaimable VAT invoice is available. |
Actual Item Photo Gallery
These are photographs of the assembly being sold. They are the primary condition and included-parts reference. Zoom in and compare the shell shape, glass, spoiler, wiper, apertures, wiring and mounting points with your original part.
Where This Part Fits On The Vehicle
Location guide: the tailgate is the full upper rear closure of the 5-door GLA H247. It pivots from roof-level hinges and closes against the rear body aperture and latch striker.
Exact Year Compatibility Table
| Year | Vehicle | Chassis / Body | Compatibility Status | Mandatory Check |
|---|---|---|---|---|
| 2020 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed generation | Original tailgate must match A2477408400 and photographed equipment |
| 2021 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed generation | Match number, glass tint, spoiler, camera/handle layout, loom and connectors |
| 2022 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed generation | Match number and all attached equipment before purchase |
| 2023 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed generation | Pre-/post-update equipment can differ; number and connectors must match |
| 2024 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed by part-number cross-reference | Confirm factory reference A2477408400 and equipment specification |
| 2025 | Mercedes-Benz GLA-Class | H247, 5-door SUV | Confirmed by part-number cross-reference | Confirm factory reference A2477408400 and equipment specification |
Vehicles This Part Will Not Fit
| Vehicle / Chassis | Status | Reason |
|---|---|---|
| Mercedes-Benz B-Class W247 | DOES NOT FIT | Different tailgate design and different factory reference: A2477402301 |
| Mercedes-Benz GLA X156, first generation | DOES NOT FIT | Different generation, panel profile, glass shape, hinges and mounting points |
| Mercedes-Benz EQA H243 | DOES NOT FIT | Different electric-SUV rear body and tailgate reference family |
| Mercedes-Benz GLB X247 | DOES NOT FIT | Different vehicle body, rear aperture and tailgate dimensions |
| Mercedes-Benz A-Class W177 / V177 | DOES NOT FIT | Different hatchback / saloon body structure |
| Any H247 with a different original tailgate number or incompatible equipment | DO NOT ASSUME | Camera, handle, glass tint, alarm sensor, wiring, power-lift hardware and connector layouts can vary |
Buy The Correct Part First Time — Matching Checklist
Must Match
- Vehicle is a Mercedes-Benz GLA H247 5-door SUV
- Model year falls within the confirmed 2020-2025 range
- Original tailgate reference matches A2477408400 / 247-740-84-00
- Rear glass tint and heater-line layout match
- Upper spoiler and high-level brake-lamp shape match
- Handle, camera aperture and number-plate mounting layout match
- Wiring loom, plug shapes, connector count and option equipment match
- Power-tailgate or manual-lift hardware is compatible with your vehicle
Do Not Rely On
- Paint colour alone — Mercedes silver shades and paint codes differ
- The word “247” alone — B-Class W247 and GLB X247 are different vehicles
- Engine size alone — equipment and connectors can differ
- eBay vehicle compatibility alone without checking your original part
- A similar-looking internet photograph
- Registration year alone where the vehicle has been imported or registered late
- Assuming every attached electrical component is plug-and-play
- Ordering before comparing all actual-item photographs
What Is Included
Visible With This Assembly
- Silver metallic H247 tailgate shell
- Bonded rear window glass with visible heater elements
- Rear wiper arm and blade
- Upper spoiler and high-level brake lamp
- Mercedes star and GLA 200d model badge
- Attached wiring, lock/handle-area hardware and components only where shown in the photographs
Not Included / Not Guaranteed
- Rear outer lamp units — apertures are visible and lamps are not shown fitted
- Interior trim panel unless clearly photographed
- Vehicle-side hinges, gas struts or powered lift spindles unless shown
- Rear bumper, parcel shelf, roof trim or body-side wiring
- Compatibility of any attached camera, module, loom or lock without matching numbers
- Paint match — preparation, blending or refinishing may be required
Supply rule: the photographed assembly and the parts visibly attached to it are the sale reference. Loose, hidden or unpictured parts are not promised.
What The Tailgate Does
The tailgate closes and seals the luggage compartment while providing rear access to the vehicle. It carries or supports the rear glass, heated-window elements, rear wiper system, upper spoiler, high-level brake lamp, latch/locking mechanism, handle, wiring and—depending on vehicle specification—rear camera, antenna, alarm and powered-opening equipment.
Common Reasons Replacement Is Needed
Body / Alignment Symptoms
- Collision dents, creases or a distorted outer skin
- Damaged hinge mounting area or uneven panel gaps
- Tailgate will not shut, latch or sit flush
- Wind noise, rattles or water entry around the rear opening
- Corrosion or damaged mounting points
Attached-System Symptoms
- Cracked rear glass or failed heater elements
- Rear wiper, washer or high-level brake-lamp faults
- Broken loom wires or damaged electrical connectors
- Handle, latch, camera or central-locking issues
- Powered tailgate movement, alignment or anti-trap errors
Some symptoms may be caused by an attached component, wiring, adjustment or coding rather than the metal panel itself. Diagnose the fault before replacing the assembly.
Why Choose A Factory-Supplied Mercedes-Benz Panel
Correct Geometry
Designed around the H247 roof hinges, rear aperture, latch position, glass opening and exterior shut lines.
Correct Mounting Architecture
Uses the vehicle’s intended locations for wiring, trim, spoiler, glass, wiper, handle and option-specific equipment.
Lower Replacement Cost
A pre-owned factory panel can cost substantially less than a new dealer-supplied assembly. Savings of up to 70% may be possible depending on part, condition and current market price.
Professional Fitting Guide
- Confirm the replacement number, body shape, equipment, connectors and paint requirements before dismantling the vehicle.
- Save vehicle settings where required, switch off the ignition and disconnect the 12-volt battery in accordance with the manufacturer procedure.
- Protect the roof edge, rear quarter panels, bumper and luggage opening with clean covers and masking protection.
- Remove the original tailgate interior trim and identify every electrical connector, earth lead, washer hose and loom routing point. Photograph and label them.
- Support the tailgate using an approved lifting aid or at least two competent technicians. Never rely on struts or powered spindles alone.
- Disconnect the loom, washer hose and attached systems. Remove or release gas struts / powered lift spindles using the correct safe procedure.
- Mark hinge positions, remove the hinge fasteners and lift the original tailgate clear without contacting the roof or rear quarters.
- Transfer only the required trim, lamps, camera, handle, lock, modules, seals and wiring after comparing every number and connector.
- Position the replacement panel, install fasteners loosely, then align roof gap, side gaps, lower corners and latch engagement before final tightening.
- Tighten all fasteners to the current manufacturer specification. Do not guess torque values.
- Reconnect the loom, earths and washer hose without trapping, stretching or routing them across sharp edges.
- Reconnect the battery and test latch, central locking, glass heater, wiper/washer, high-level brake lamp, number-plate lights, camera and powered opening where fitted.
- Carry out diagnostic scanning, coding, initialisation or camera calibration where the vehicle reports faults or the transferred equipment requires it.
- Complete a controlled water-leak test and final panel-gap / paint-contact inspection before road use.
Required Tools & Workshop Equipment
Hand Tools
- Metric socket and ratchet set
- Torx and external-Torx bit set
- Trim-removal tools
- Torque wrench covering the specified fastener range
- Electrical connector release tools
- Marker pen, labels and protective tape
Safety / Diagnostic Equipment
- Tailgate lifting frame, panel stand or two-person lifting support
- Bodywork covers and clean padded blankets
- Safety gloves and eye protection
- Multimeter and manufacturer-capable diagnostic scanner
- Battery support equipment where required
- Water-test equipment and suitable workshop lighting
Estimated Repair Time & Static Garage Labour Guide
Typical fitting estimate: approximately 2.5 to 4.0 labour hours for a like-for-like assembled tailgate swap by an experienced bodyshop. Extra time may be required for paintwork, glass transfer, seized hardware, trim transfer, wiring repair, powered-tailgate setup, diagnostic coding or camera calibration.
Simple calculation: garage labour estimate = hourly labour rate × booked hours.
| Garage Rate | 2.5 Hours | 3.0 Hours | 4.0 Hours |
|---|---|---|---|
| £50 per hour | £125.00 | £150.00 | £200.00 |
| £75 per hour | £187.50 | £225.00 | £300.00 |
| £90 per hour | £225.00 | £270.00 | £360.00 |
| £100 per hour | £250.00 | £300.00 | £400.00 |
| £125 per hour | £312.50 | £375.00 | £500.00 |
Guide only: labour rates and booked times vary by garage, region, vehicle condition and work required. Parts, paint, materials, calibration and VAT on workshop services may be additional.
Postage, International Delivery & Checkout Address
Free UK Mainland P&P*
Free UK mainland delivery applies only where the eBay listing and checkout show a zero domestic postage charge. Highlands, islands, Northern Ireland, remote postcodes and oversized-freight locations may require a different service or may be excluded.
International Orders
International availability is controlled by eBay International Shipping / the Global Shipping Programme and is shown for the buyer’s address at checkout. Large body panels can be excluded by size, weight, route or category restrictions. International postage, duties and import charges are calculated by eBay where the programme accepts the item.
Condition, Returns & Return-Prevention Notice
- Inspect every actual-item photograph for marks, paint condition, glass, apertures, wiring and included components.
- Confirm H247 body code and A2477408400 before purchase. A similar model name or year alone is not enough.
- Body panels should be professionally inspected, prepared and trial-fitted before painting.
- Do not cut, drill, paint, alter, code or install the item until you have completed the fitment comparison.
- Returns are handled under the return policy displayed by eBay and applicable consumer law.
- For an incorrect order or change of mind, follow the return instructions shown on the order. The item must be protected and returned complete in the same condition.
- Where eBay permits, a deduction may apply only for actual loss in value caused by installation, alteration, damage, missing parts or inadequate return packaging. No fixed restocking fee is stated.
- If the item arrives damaged or materially differs from the description, report it through the eBay order and retain all packaging and photographs.
Support A Local Parts Business & Reduce Waste
Small Business
Your order supports an independent local automotive parts business and the people who identify, store, photograph, pack and dispatch each component.
Reuse Before Remanufacture
Reusing a serviceable factory panel keeps valuable steel, glass, plastics and electrical components in circulation and reduces avoidable waste.
Careful Dispatch
Large body panels require secure protection and specialist handling. Please inspect the packaging on arrival and record any courier damage immediately.
ThePartPilot holds more than 25,000 vehicle parts in stock at any one time. Buying a carefully matched pre-owned component can reduce repair cost and environmental impact while retaining the vehicle’s intended mounting geometry and appearance. Thank you for supporting responsible automotive recycling. 🌍🚗
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.