Mercedes S Class W220 Rear Bumper 02 4Dr 744 Silver A2208801171 Free Postage
Mercedes S Class W220 Rear Bumper 02 4Dr 744 Silver A2208801171 Free Postage
Mercedes-Benz S-Class W220 Rear Bumper
Do not order this bumper from registration year, engine size or the vehicle photograph alone. The photographed identification label on this exact item shows A2208801171 and W220 HI ECE.
For the safest fitment confirmation, send your full 17-character VIN through eBay Messages before purchasing. We will compare the VIN/application, part number, bumper shape, trim and equipment against the supplied photographs.
Exact Item Identification
| Detail | Information verified for this item |
|---|---|
| Part | Rear bumper cover / outer rear bumper assembly |
| Manufacturer part number | A2208801171 — visible on the photographed identification label |
| Additional production number | 0005197823 |
| Label application | W220 HI ECE |
| Label date | 08.02.2001 |
| Colour | Brilliant Silver — listing reference 744; supplier label shows 9744 |
| Donor vehicle | 2002 Mercedes-Benz S-Class W220, 4-door saloon |
| Donor engine information | M112.922 / 2799cc as recorded in the donor listing |
| Parking sensor apertures | No circular rear PDC / Parktronic sensor holes are visible in the supplied photographs |
| Construction | Moulded plastic bumper cover. Exact polymer grade has not been verified, so none is claimed. |
| Condition | Used. Cosmetic marks, scratches/scuffs and paint wear are visible. Please inspect every photograph. Cosmetic preparation or refinishing may be required depending on the finish you expect. |
| Included | The bumper and attached components/trim shown in the actual-item photographs. Nothing not pictured should be assumed to be supplied. |
Actual Item Reference Photographs
These photographs are hosted on eBay's own image CDN and show the actual bumper offered in this listing rather than an unrelated stock item.
Actual item — overall bumper reference
Actual item — shape, trim and condition reference
Actual item — visual configuration reference
Actual photographed identification label — A2208801171
Where Is This Part Fitted?
This bumper forms the visible lower rear exterior panel beneath the boot and rear lamp area and wraps around the rear corners into the quarter-panel area. It interfaces with the body mounting guides, rear trim, wheel-arch/underbody fixings and tow-eye access.
The outer bumper cover itself is not an electronic control unit. On vehicles equipped with parking assistance, the sensors, wiring and control electronics are separate components. A parking-system warning therefore does not automatically mean that the bumper cover itself is faulty.
Parts Compatibility — Buy Correctly First Time
| Status | Vehicle | Year | Body / chassis | Fitment requirement |
|---|---|---|---|---|
| CONFIRMED DONOR | Mercedes-Benz S-Class | 2002 | W220 4-door saloon | Exact supplied item is photographed and labelled A2208801171. Match part number, bumper configuration and equipment. |
| VIN CHECK | Mercedes-Benz S-Class 220-series | W220 production family | 4-door saloon | A2208801171 is cross-referenced in W220 parts catalogues, but this is not a guarantee that every W220 derivative uses this exact bumper. Confirm the 17-character VIN and visual configuration before ordering. |
Do NOT Assume It Fits These
| Vehicle / configuration | Reason |
|---|---|
| Mercedes-Benz CL-Class C215 2-door coupe | Different body/chassis and rear bumper assembly. |
| Mercedes-Benz S-Class W221 | Different S-Class generation and bumper architecture. |
| Mercedes-Benz S-Class W140 | Earlier S-Class generation with a different bumper design. |
| W220 with a different bumper part number | A different number or documented configuration must be checked rather than assumed interchangeable. |
| Different AMG / styling-package bumper configuration | Styling, trim, lower sections and mounting arrangements may differ. VIN verification required. |
| Vehicle requiring visible rear PDC sensor apertures | No circular sensor holes are visible on this supplied bumper. Do not order it as a direct like-for-like PDC replacement without confirming the vehicle's exact configuration. |
Visual Fitment Checklist
Before paying, compare your existing bumper with the actual-item photographs above:
- Confirm A2208801171 wherever a readable number is available.
- Confirm the vehicle is a Mercedes-Benz S-Class W220 4-door saloon application.
- Compare the complete bumper profile and both rear corner shapes.
- Compare the chrome/bright trim arrangement.
- Compare tow-eye/access-cover position and shape.
- Compare all visible mounting features and inner carrier areas.
- Confirm whether your vehicle has rear Parktronic/PDC sensor holes.
- Check whether your vehicle has an AMG or other styling package.
- Compare paint code if colour matching matters.
- Send the full 17-character VIN through eBay Messages if anything is uncertain.
Symptoms of a Damaged or Failing Rear Bumper Assembly
Why Choose a Mercedes-Benz Factory Production Part?
A factory production component was designed around the vehicle's intended body geometry, mounting positions, trim interfaces and surrounding panels. With a used bumper, the critical buying step is matching the exact part number and configuration rather than simply buying something that looks approximately similar.
Reusing a serviceable factory part can also be considerably less expensive than purchasing a comparable brand-new body component while keeping an existing component in service. Because market prices change, we do not make an unsupported percentage-saving promise: compare the current price of the exact replacement you require.
For this bumper, the photographed identification number and actual-item images give you much more useful fitment evidence than a generic stock picture.
Fitting Guide
Recommended Tools
- Metric socket and ratchet set
- Suitable extensions
- Torx driver set
- Screwdrivers
- Plastic trim-removal tools
- Trim / clip pliers
- Work light
- Masking tape or paint-edge protection
- Protective blankets
- A second person to support the bumper during removal/refitting
General Removal / Installation Sequence
- Verify the VIN, A2208801171, bumper style and equipment configuration before dismantling the vehicle.
- Park securely on level ground, switch the ignition off and protect adjacent painted panels.
- Where necessary, gain access to the rear bumper retaining points through the luggage-compartment, wheel-arch and lower-body trim areas.
- Remove the relevant bumper fasteners, clips and retaining hardware without forcing plastic guides.
- Support both ends of the bumper. A second person is strongly recommended to avoid damaging the quarter panels or bumper corners.
- Carefully release the bumper from its side/body guides.
- If the particular vehicle has wiring or bumper-mounted electrical equipment, disconnect it correctly before moving the bumper fully away from the vehicle.
- Inspect guides, clips, retainers and underlying impact components. Replace damaged mounting hardware rather than forcing the replacement bumper onto distorted parts.
- Transfer only compatible trim/components where required.
- Offer the replacement bumper squarely to the body, engage the guides correctly and refit the fasteners.
- Check both rear corner gaps, boot/lamp-area alignment, tow-eye access and secure retention.
- Tighten all fasteners using the correct Mercedes-Benz workshop specification for the VIN. We intentionally do not invent torque figures.
Estimated Workshop Time
For planning purposes only, allow approximately 1.0–2.0 labour hours for a straightforward rear-bumper remove/refit. This is not a manufacturer flat-rate time. Corroded/missing fixings, previous accident damage, trim transfer, wiring, sensor work and paint preparation can increase labour.
Fitting service available subject to workshop capacity. Contact us through eBay Messages before travelling or purchasing if fitting is required.
Garage Labour Cost Guide
eBay listings cannot use JavaScript for a live calculator, so the table below gives the same information without active content. Multiply the workshop's hourly rate by the actual labour time.
| Garage Rate | 1.0 Hour | 1.5 Hours | 2.0 Hours |
|---|---|---|---|
| £50/hr | £50.00 | £75.00 | £100.00 |
| £75/hr | £75.00 | £112.50 | £150.00 |
| £100/hr | £100.00 | £150.00 | £200.00 |
| £125/hr | £125.00 | £187.50 | £250.00 |
| £150/hr | £150.00 | £225.00 | £300.00 |
Labour illustration only. Paint, materials, replacement clips, diagnostics, additional repairs and VAT/tax treatment at the chosen repairer are not included.
ThePartPilot Service
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery & International Orders
UK and international delivery options are those displayed by eBay for this specific listing and destination at checkout.
International programme availability depends on eBay's current eligibility rules as well as the packed size, weight, category and destination of the item. Because this is a large body panel, please rely on the delivery options actually shown by eBay at checkout rather than assuming that every country is available.
Returns — Please Help Us Prevent Wrong-Part Orders
Our aim is to identify the component correctly before dispatch so that you receive the correct part first time. Please use the part number, photographs and VIN-check service before purchasing.
Returns are handled in accordance with the return terms shown on the eBay order and applicable eBay/consumer rules. Your statutory rights are unaffected.
If an item is returned used, altered, damaged or in a materially different condition from that supplied, any deduction for diminished value will only be applied where and to the extent permitted by eBay's applicable seller-protection/returns rules. There is no blanket restocking charge merely because a buyer returns an item.
VAT / Global Accounting
Where applicable to this used item, the sale is handled under our Global Accounting / VAT-margin treatment. VAT is therefore not shown separately in the normal way and is not separately itemised for reclaim in the manner of a standard VAT sale.
Any destination-country import VAT, customs charge or other international tax is determined by the relevant eBay checkout process and/or destination authority where applicable.
Supporting Reuse & Independent Business
Thank you for supporting an independent UK automotive parts business. Reusing a serviceable vehicle component keeps an existing part in circulation instead of discarding something that still has useful life. It also helps make repairs viable on vehicles where purchasing every replacement component new may be uneconomical.
Every correct fitment check also matters: sending the right part first time reduces unnecessary return transport, packaging and handling. That is why ThePartPilot places part-number, VIN and visual verification ahead of guesswork.
Mercedes-Benz S-Class W220 Rear Bumper
Do not order this bumper from registration year, engine size or the vehicle photograph alone. The photographed identification label on this exact item shows A2208801171 and W220 HI ECE.
For the safest fitment confirmation, send your full 17-character VIN through eBay Messages before purchasing. We will compare the VIN/application, part number, bumper shape, trim and equipment against the supplied photographs.
Exact Item Identification
| Detail | Information verified for this item |
|---|---|
| Part | Rear bumper cover / outer rear bumper assembly |
| Manufacturer part number | A2208801171 — visible on the photographed identification label |
| Additional production number | 0005197823 |
| Label application | W220 HI ECE |
| Label date | 08.02.2001 |
| Colour | Brilliant Silver — listing reference 744; supplier label shows 9744 |
| Donor vehicle | 2002 Mercedes-Benz S-Class W220, 4-door saloon |
| Donor engine information | M112.922 / 2799cc as recorded in the donor listing |
| Parking sensor apertures | No circular rear PDC / Parktronic sensor holes are visible in the supplied photographs |
| Construction | Moulded plastic bumper cover. Exact polymer grade has not been verified, so none is claimed. |
| Condition | Used. Cosmetic marks, scratches/scuffs and paint wear are visible. Please inspect every photograph. Cosmetic preparation or refinishing may be required depending on the finish you expect. |
| Included | The bumper and attached components/trim shown in the actual-item photographs. Nothing not pictured should be assumed to be supplied. |
Actual Item Reference Photographs
These photographs are hosted on eBay's own image CDN and show the actual bumper offered in this listing rather than an unrelated stock item.
Actual item — overall bumper reference
Actual item — shape, trim and condition reference
Actual item — visual configuration reference
Actual photographed identification label — A2208801171
Where Is This Part Fitted?
This bumper forms the visible lower rear exterior panel beneath the boot and rear lamp area and wraps around the rear corners into the quarter-panel area. It interfaces with the body mounting guides, rear trim, wheel-arch/underbody fixings and tow-eye access.
The outer bumper cover itself is not an electronic control unit. On vehicles equipped with parking assistance, the sensors, wiring and control electronics are separate components. A parking-system warning therefore does not automatically mean that the bumper cover itself is faulty.
Parts Compatibility — Buy Correctly First Time
| Status | Vehicle | Year | Body / chassis | Fitment requirement |
|---|---|---|---|---|
| CONFIRMED DONOR | Mercedes-Benz S-Class | 2002 | W220 4-door saloon | Exact supplied item is photographed and labelled A2208801171. Match part number, bumper configuration and equipment. |
| VIN CHECK | Mercedes-Benz S-Class 220-series | W220 production family | 4-door saloon | A2208801171 is cross-referenced in W220 parts catalogues, but this is not a guarantee that every W220 derivative uses this exact bumper. Confirm the 17-character VIN and visual configuration before ordering. |
Do NOT Assume It Fits These
| Vehicle / configuration | Reason |
|---|---|
| Mercedes-Benz CL-Class C215 2-door coupe | Different body/chassis and rear bumper assembly. |
| Mercedes-Benz S-Class W221 | Different S-Class generation and bumper architecture. |
| Mercedes-Benz S-Class W140 | Earlier S-Class generation with a different bumper design. |
| W220 with a different bumper part number | A different number or documented configuration must be checked rather than assumed interchangeable. |
| Different AMG / styling-package bumper configuration | Styling, trim, lower sections and mounting arrangements may differ. VIN verification required. |
| Vehicle requiring visible rear PDC sensor apertures | No circular sensor holes are visible on this supplied bumper. Do not order it as a direct like-for-like PDC replacement without confirming the vehicle's exact configuration. |
Visual Fitment Checklist
Before paying, compare your existing bumper with the actual-item photographs above:
- Confirm A2208801171 wherever a readable number is available.
- Confirm the vehicle is a Mercedes-Benz S-Class W220 4-door saloon application.
- Compare the complete bumper profile and both rear corner shapes.
- Compare the chrome/bright trim arrangement.
- Compare tow-eye/access-cover position and shape.
- Compare all visible mounting features and inner carrier areas.
- Confirm whether your vehicle has rear Parktronic/PDC sensor holes.
- Check whether your vehicle has an AMG or other styling package.
- Compare paint code if colour matching matters.
- Send the full 17-character VIN through eBay Messages if anything is uncertain.
Symptoms of a Damaged or Failing Rear Bumper Assembly
Why Choose a Mercedes-Benz Factory Production Part?
A factory production component was designed around the vehicle's intended body geometry, mounting positions, trim interfaces and surrounding panels. With a used bumper, the critical buying step is matching the exact part number and configuration rather than simply buying something that looks approximately similar.
Reusing a serviceable factory part can also be considerably less expensive than purchasing a comparable brand-new body component while keeping an existing component in service. Because market prices change, we do not make an unsupported percentage-saving promise: compare the current price of the exact replacement you require.
For this bumper, the photographed identification number and actual-item images give you much more useful fitment evidence than a generic stock picture.
Fitting Guide
Recommended Tools
- Metric socket and ratchet set
- Suitable extensions
- Torx driver set
- Screwdrivers
- Plastic trim-removal tools
- Trim / clip pliers
- Work light
- Masking tape or paint-edge protection
- Protective blankets
- A second person to support the bumper during removal/refitting
General Removal / Installation Sequence
- Verify the VIN, A2208801171, bumper style and equipment configuration before dismantling the vehicle.
- Park securely on level ground, switch the ignition off and protect adjacent painted panels.
- Where necessary, gain access to the rear bumper retaining points through the luggage-compartment, wheel-arch and lower-body trim areas.
- Remove the relevant bumper fasteners, clips and retaining hardware without forcing plastic guides.
- Support both ends of the bumper. A second person is strongly recommended to avoid damaging the quarter panels or bumper corners.
- Carefully release the bumper from its side/body guides.
- If the particular vehicle has wiring or bumper-mounted electrical equipment, disconnect it correctly before moving the bumper fully away from the vehicle.
- Inspect guides, clips, retainers and underlying impact components. Replace damaged mounting hardware rather than forcing the replacement bumper onto distorted parts.
- Transfer only compatible trim/components where required.
- Offer the replacement bumper squarely to the body, engage the guides correctly and refit the fasteners.
- Check both rear corner gaps, boot/lamp-area alignment, tow-eye access and secure retention.
- Tighten all fasteners using the correct Mercedes-Benz workshop specification for the VIN. We intentionally do not invent torque figures.
Estimated Workshop Time
For planning purposes only, allow approximately 1.0–2.0 labour hours for a straightforward rear-bumper remove/refit. This is not a manufacturer flat-rate time. Corroded/missing fixings, previous accident damage, trim transfer, wiring, sensor work and paint preparation can increase labour.
Fitting service available subject to workshop capacity. Contact us through eBay Messages before travelling or purchasing if fitting is required.
Garage Labour Cost Guide
eBay listings cannot use JavaScript for a live calculator, so the table below gives the same information without active content. Multiply the workshop's hourly rate by the actual labour time.
| Garage Rate | 1.0 Hour | 1.5 Hours | 2.0 Hours |
|---|---|---|---|
| £50/hr | £50.00 | £75.00 | £100.00 |
| £75/hr | £75.00 | £112.50 | £150.00 |
| £100/hr | £100.00 | £150.00 | £200.00 |
| £125/hr | £125.00 | £187.50 | £250.00 |
| £150/hr | £150.00 | £225.00 | £300.00 |
Labour illustration only. Paint, materials, replacement clips, diagnostics, additional repairs and VAT/tax treatment at the chosen repairer are not included.
ThePartPilot Service
Delivery & International Orders
UK and international delivery options are those displayed by eBay for this specific listing and destination at checkout.
International programme availability depends on eBay's current eligibility rules as well as the packed size, weight, category and destination of the item. Because this is a large body panel, please rely on the delivery options actually shown by eBay at checkout rather than assuming that every country is available.
Returns — Please Help Us Prevent Wrong-Part Orders
Our aim is to identify the component correctly before dispatch so that you receive the correct part first time. Please use the part number, photographs and VIN-check service before purchasing.
Returns are handled in accordance with the return terms shown on the eBay order and applicable eBay/consumer rules. Your statutory rights are unaffected.
If an item is returned used, altered, damaged or in a materially different condition from that supplied, any deduction for diminished value will only be applied where and to the extent permitted by eBay's applicable seller-protection/returns rules. There is no blanket restocking charge merely because a buyer returns an item.
VAT / Global Accounting
Where applicable to this used item, the sale is handled under our Global Accounting / VAT-margin treatment. VAT is therefore not shown separately in the normal way and is not separately itemised for reclaim in the manner of a standard VAT sale.
Any destination-country import VAT, customs charge or other international tax is determined by the relevant eBay checkout process and/or destination authority where applicable.
Supporting Reuse & Independent Business
Thank you for supporting an independent UK automotive parts business. Reusing a serviceable vehicle component keeps an existing part in circulation instead of discarding something that still has useful life. It also helps make repairs viable on vehicles where purchasing every replacement component new may be uneconomical.
Every correct fitment check also matters: sending the right part first time reduces unnecessary return transport, packaging and handling. That is why ThePartPilot places part-number, VIN and visual verification ahead of guesswork.
Do not order this bumper using registration year, engine size or vehicle appearance alone. The photographed identification label on this exact item shows A2208801171 and W220 HI ECE.
For the safest fitment confirmation, send your full 17-character VIN through eBay Messages before purchase. We can compare the VIN, part number, bumper shape, trim and equipment configuration.
| Detail | Verified Information |
|---|---|
| Part | Rear bumper cover / outer rear bumper assembly |
| Part Number | A2208801171 |
| Production Number | 0005197823 |
| Label Application | W220 HI ECE |
| Label Date | 08.02.2001 |
| Colour | Brilliant Silver 744. Supplier label also shows 9744. |
| Donor Vehicle | 2002 Mercedes-Benz S-Class W220 4-door saloon |
| Donor Engine | M112.922 / 2799cc as recorded for the donor vehicle |
| Parking Sensor Apertures | No circular rear PDC sensor openings are visible in the supplied photographs. |
| Construction | Moulded plastic bumper cover. Exact polymer specification is not claimed. |
| Condition | Used. Cosmetic marks, scuffs and paint wear may be present. Inspect all photographs carefully. |
These photographs are hosted by eBay and show the actual item offered for sale.
The bumper forms the visible lower rear exterior panel beneath the boot and rear lamp area. It wraps around both rear corners and interfaces with the body guides, lower fixings, trim and tow-eye access area.
The plastic outer cover is not itself an electronic control unit. Where parking assistance is fitted, sensors, wiring and electronic control hardware are separate items.
| Status | Vehicle | Year | Body | Requirement |
|---|---|---|---|---|
| CONFIRMED DONOR | Mercedes-Benz S-Class | 2002 | W220 4-door saloon | Match A2208801171, bumper shape, trim and equipment. |
| VIN CHECK | Mercedes-Benz S-Class 220-series | W220 family | 4-door saloon | Do not assume every W220 derivative uses this exact bumper. VIN confirmation is advised. |
| Vehicle / Configuration | Reason |
|---|---|
| Mercedes-Benz CL-Class C215 2-door coupe | Different body and rear bumper architecture. |
| Mercedes-Benz S-Class W221 | Later generation with different body components. |
| Mercedes-Benz S-Class W140 | Earlier generation with different bumper design. |
| W220 carrying a different bumper number | Different number or configuration must be checked before purchase. |
| Different AMG or styling package | Trim, lower sections and fixing arrangements may differ. |
| Vehicle requiring visible rear PDC openings | No circular sensor openings are visible on this bumper. |
- Confirm A2208801171 where a readable number is available.
- Confirm Mercedes-Benz S-Class W220 4-door saloon configuration.
- Compare the complete bumper profile.
- Compare both rear corner shapes.
- Compare the bright trim arrangement.
- Compare tow-eye access position and shape.
- Compare visible fixing and mounting areas.
- Confirm whether your vehicle uses rear parking sensors.
- Check AMG or styling-package equipment.
- Compare paint code where colour matters.
- Send the full 17-character VIN through eBay Messages if uncertain.
|
Loose or sagging corners Damaged locating tabs, guides or fixings can allow poor alignment. |
Cracks or splits Previous impact damage can fracture the moulded bumper material. |
|
Uneven panel gaps Distortion or damaged guides can cause poor body alignment. |
Impact or paint damage Deep scuffs, distortion or prior repairs may justify changing the bumper. |
|
Damaged trim retention Broken attachment points can prevent trim from sitting securely. |
Movement or rattling Loose movement can indicate damaged or missing fixings. |
A factory production component was designed around the vehicle's intended body geometry, fixing positions, trim interfaces and surrounding panels.
When buying a used body component, matching the photographed part number and physical configuration is much safer than buying an inexpensive copy that only appears similar.
A serviceable used factory component can also offer a major saving against buying the same type of component new while keeping an existing automotive part in useful service.
- Metric socket and ratchet set
- Suitable socket extensions
- Torx driver set
- Screwdrivers
- Plastic trim tools
- Clip pliers
- Work light
- Masking tape or panel-edge protection
- Protective blankets
- A second person to support the bumper
- Verify the VIN, A2208801171 and bumper configuration before dismantling the vehicle.
- Park safely on level ground and protect adjacent painted panels.
- Gain access to the rear bumper fixing points as required.
- Remove the relevant fasteners, clips and retaining hardware carefully.
- Support both ends of the bumper.
- Release the bumper carefully from the side body guides.
- Disconnect any relevant wiring fitted to the vehicle before moving the bumper fully away.
- Inspect guides, clips, retainers and underlying impact components.
- Transfer compatible trim or hardware where required.
- Offer the supplied bumper squarely to the body and engage the guides correctly.
- Check corner alignment, panel gaps, tow-eye access and secure retention.
- Tighten all fasteners to the correct workshop specification for the vehicle VIN.
For planning purposes, approximately 1.0 to 2.0 labour hours may be reasonable for a straightforward rear bumper remove-and-fit operation.
Actual time can increase due to damaged fixings, previous accident damage, wiring, trim transfer, paint preparation or other repair work.
Use the table below as a simple labour estimate.
| Hourly Rate | 1.0 Hour | 1.5 Hours | 2.0 Hours |
|---|---|---|---|
| £50/hr | £50.00 | £75.00 | £100.00 |
| £75/hr | £75.00 | £112.50 | £150.00 |
| £100/hr | £100.00 | £150.00 | £200.00 |
| £125/hr | £125.00 | £187.50 | £250.00 |
| £150/hr | £150.00 | £225.00 | £300.00 |
Labour illustration only. Paint, materials, clips, diagnostics and additional repair work are not part of these figures.
|
25,000+ Parts In Stock More than 25,000 automotive parts held on the shelf across our inventory. |
Collection 7 Days Collection by prior appointment seven days a week up to 8pm, with bank holiday collection by prior arrangement. |
|
Workshop Service Fitting and repair work available subject to workshop capacity and prior arrangement. |
Fitment Support Send your 17-character VIN through eBay Messages before purchase if uncertain. |
|
Careful Dispatch Large used body components are protected appropriately for dispatch. |
Checkout Address Please ensure the delivery address entered at checkout is correct before payment. |
UK and international delivery options are those displayed by eBay for this listing and delivery destination at checkout.
International availability can depend on item size, packed weight, category and destination. For a large body panel, use the delivery options shown by eBay during checkout as the final guide.
Our aim is to identify parts accurately before dispatch so customers receive the correct component first time.
Please compare the photographed number, actual-item photographs, vehicle configuration and VIN before purchase.
Returns are handled under the return terms shown on the eBay order and applicable consumer rules. Statutory rights are unaffected.
Where an item comes back used, altered, damaged or materially different from the condition supplied, any permitted deduction will only be applied in accordance with the applicable eBay return and seller-protection rules.
Where applicable to this used item, the transaction is handled under our Global Accounting / VAT margin treatment. VAT is not separately itemised for reclaim in the same manner as a standard VAT invoice.
Any international import tax, customs charge or destination-country tax is determined by the applicable checkout process and destination authority.
♻ Thank you for supporting an independent UK automotive parts business.
Keeping a serviceable vehicle component in circulation helps reduce unnecessary waste and can make repairs more economical.
Accurate fitment checking also helps reduce unnecessary return transport, packaging and handling. That is why ThePartPilot prioritises part-number, VIN and visual verification.
🚗 Correct part. Correct vehicle. First time.