Mini Cooper S R56 2010-2014 1.6 Turbo Petrol Air Intake Inlet Manifold
Mini Cooper S R56 2010-2014 1.6 Turbo Petrol Air Intake Inlet Manifold
Mini Cooper S R56 (2010-2014) 1.6 Turbo Petrol Intake Manifold
Premium Recycled Mini Parts | Global Shipping
Vehicle Reference & Fitment
This part has been expertly removed from and is designed to fit the Mini Cooper S R56 / R55 / R57 1.6 Turbo Petrol (2010-2014 Facelift Models) equipped with the N18 turbocharged engine. Below is a reference image of the exact vehicle type this part belongs to, alongside the manufacturer logo confirming authenticity.
Where is this part fitted & What does it control?
This Air Intake Inlet Manifold is located in the Front/Top Engine Bay, bolting directly onto the cylinder head intake ports of the 1.6L Prince N18 turbocharged engine. Its primary function is to evenly distribute pressurized air coming from the turbocharger intercooler across all four engine cylinders to maximize combustion efficiency and boost performance.
Part Details & Symptoms of Failure
Material & Construction: Manufactured using high-impact, thermal-resistant composite polymer engineered to handle high turbo boost pressures and under-bonnet engine heat without warping or cracking.
Common Symptoms of a Faulty Intake Manifold:
- Engine Check Light (EML) triggered by boost leaks or manifold absolute pressure (MAP) faults.
- Hissing or whistling noises under heavy turbo acceleration.
- Rough idling, engine misfires, or noticeable loss of turbo boost power.
- Visible cracks in the plastic housing or vacuum leaks around the gasket seating surfaces.
The MASSIVE Benefit of Buying Original Parts vs Cheap Copies: Cheap aftermarket intake manifolds often suffer from weak internal runner walls that can crack under high boost, or poor gasket sealing faces leading to constant vacuum leaks. Buying an original, factory-removed Mini unit guarantees perfect port alignment and absolute structural integrity. Best of all, you can save as much as 70% buying our premium used original parts instead of buying new from a main dealer!
Parts Compatibility Chart
Use the chart below to confirm fitment for your vehicle. Always try to verify fitment against the images provided before purchasing. Note: This listing is specifically for N18 engine variants (2010+ facelift).
| Vehicle Make & Model | Years / Engine Variant | Fitment Status |
|---|---|---|
| Mini Cooper S R56 Hatchback / R55 Clubman / R57 Convertible | 2010 - 2014 (1.6 Turbo - N18 Engine) | CONFIRMED FIT |
| Mini Cooper S R56 (Pre-Facelift N14 Engine) | 2006 - 2010 | WILL NOT FIT (Different Port / Sensor Layout) |
| Mini Cooper Non-Turbo (Naturally Aspirated) | 2006 - 2014 | WILL NOT FIT |
Note: Customers must ensure their checkout address is correct at the time of purchase. We cannot alter delivery addresses once checkout is complete.
Fitting Instructions & Garage Repair Estimator
Estimated Repair Time: 1.5 to 2.0 Hours
Required Tools: Torx socket set (T30/T40), 10mm socket, ratchet extensions, flathead screwdriver, new intake manifold gaskets.
Brief Fitting Guide: Disconnect the negative battery terminal. Remove the engine aesthetic cover and intake air ducting pipes connected to the turbo. Unplug the MAP sensor and any associated vacuum lines/wiring harness clips attached to the manifold. Unbolt the securing nuts and bolts fastening the manifold to the cylinder head. Carefully remove the old manifold, clean the cylinder head mating surface completely, install new gaskets, and mount the replacement intake manifold in reverse order.
Garage Labour Cost Calculator
If you prefer a professional to handle the swap, estimate your labour costs below based on a 2-hour standard job:
| Garage Type / Hourly Rate (£) | Estimated Time | Total Estimated Labour Cost |
|---|---|---|
| Local Independent Garage (£50.00 / hr) | 2.0 Hours | £100.00 |
| Specialist Mini / BMW Mechanic (£75.00 / hr) | 2.0 Hours | £150.00 |
| Mini Main Dealer (£120.00 / hr) | 2.0 Hours | £240.00 |
*We also offer our own professional fitting and repair service subject to availability! Please contact us for a quote and to check dates.
Why Buy From ThePartPilot?
We operate a major, professional automotive dismantling and storage facility with over 25,000 parts in stock and on the shelf at any one time. Your items are stored securely, extensively checked, and prepared for immediate dispatch.
Order Collection, VAT & Shipping Information
- Flexible Local Collection: We provide local order collection options for customers seven days a week up to 8:00 PM by prior appointment, including on bank holidays!
- Global VAT Margin Scheme: We operate under the margin scheme. This means absolutely NO VAT is charged on top of your final purchase!
- Worldwide eBay GSP Shipping: We proudly post worldwide through the eBay Global Shipping Programme. Included countries are the USA, Canada, Australia, France, Germany, Italy, Spain, Ireland, Japan, New Zealand, and all other GSP-supported nations.
Have a vehicle to sell, scrap, or clear off your drive? We offer Nationwide Collection & Same Day Payment. Message us right away for a fast, hassle-free valuation!
A huge thank you for choosing ThePartPilot! When you buy from us, you are supporting a dedicated, independent local small business that works tirelessly to keep you on the road. 🤝 Choosing high-quality recycled car parts massively cuts global carbon emissions, saves vast amounts of manufacturing energy, and keeps perfectly good components out of landfills. You are doing the world a massive favor! 🌳🚗🇬🇧
How To Find Us & Contact Support
Need to double-check a part number or book a fitting appointment? Scan the QR code below using your smartphone camera to chat with our team directly on WhatsApp!