MINI R56 3 Door 2006-2013 Rear Left Seat Belt 72112751402 601030000E
MINI R56 3 Door 2006-2013 Rear Left Seat Belt 72112751402 601030000E
MINI R56 3-DOOR REAR LEFT SEAT BELT ASSEMBLY
This listing is for the rear-left upper inertia-reel seat belt assembly for the MINI Hatch R56 / R56 LCI 3-door. Match the visible label number 601030000E, MINI catalogue number 72112751402, body style, mounting bracket, reel angle, webbing colour and connector-free design against your original part. Registration year alone is not sufficient.
Item details at a glance
| Part | Rear upper inertia-reel seat belt assembly |
| Vehicle family | MINI Hatch R56 and R56 LCI, 3-door body |
| Position | Rear left / UK nearside / rear passenger position, as pictured |
| Supplier label number | 601030000E |
| MINI catalogue number | 72 11 2 751 402 / 72112751402 |
| Short reference | 2751402 |
| Listing base reference | 601030000 |
| Visible colour | Grey webbing with metal mounting hardware |
| Visible construction | Woven safety webbing, enclosed inertia reel, metal mounting bracket, belt tongue and lower anchor |
| Included | The seat belt assembly shown in the photographs only |
| Not included | Buckle/stalk, trim panels, guide loop, seats, fitting hardware not visibly attached, diagnostics or labour |
| Warranty | 30-day parts warranty from delivery, subject to listing terms and statutory rights |
Photographic part-number verification
The label photograph is the strongest identifier for this item. It visibly shows 601030000E. Compare every character with your original unit; a similar-looking reel with a different number, bracket shape or mounting angle may not fit or operate correctly.
Exact vehicle compatibility
| Vehicle | Body | Catalogue build range | Required checks |
|---|---|---|---|
| MINI Hatch R56 | 3-door hatch |
10/2005-08/2010 Production date - verify against VIN data |
601030000E / 72112751402, rear-left position, identical bracket and webbing route |
| MINI Hatch R56 LCI | 3-door hatch |
03/2009-11/2013 Production date - verify against VIN data |
601030000E / 72112751402, rear-left position, identical bracket and webbing route |
MINI R50 or R53 first-generation Hatch; R55 Clubman; R57 Convertible; R58 Coupe; R59 Roadster; R60 Countryman; R61 Paceman; F55 5-door Hatch; F56 later 3-door Hatch; or any vehicle with a different label number, mounting bracket, reel angle, webbing route or restraint system. It is also not the front belt, centre belt, buckle/stalk or plastic guide loop.
Correct vehicle and fitting location
The R56 is the second-generation 3-door MINI Hatch. This assembly is mounted behind the rear-left interior quarter trim beside the rear seat. The webbing routes upward through the rear guide and across the rear passenger.
What this part controls
The inertia reel stores and retracts the belt webbing during normal movement. When the vehicle decelerates sharply or the webbing is pulled suddenly, the reel locking mechanism should stop further extension. Correct reel orientation, bracket geometry, webbing length and guide alignment are therefore safety-critical.
Common symptoms that may indicate replacement is needed
- Webbing retracts slowly, remains loose or will not retract.
- Belt is jammed and will not extend smoothly.
- Reel fails a sharp-pull locking test.
- Webbing is cut, frayed, heat-damaged, heavily contaminated or permanently twisted.
- Belt tongue, anchor or mounting bracket is bent or damaged.
- Internal rattling or inconsistent locking is present.
Why choose a manufacturer-fit recycled component?
A correct original vehicle-specification component is designed around the vehicle's mounting points, reel angle, webbing length and interior guide path. A low-cost copy may look similar while differing in bracket geometry, lock calibration, belt length or trim alignment. Choosing the correctly matched recycled component can provide substantial savings compared with a new replacement while keeping a serviceable part in use.
| Fit confidence | Known vehicle-family geometry when the part number and photographs match |
| Value | Often considerably lower cost than a new replacement; compare current pricing for the exact saving |
| Sustainability | Extends the useful life of an existing component and reduces demand for new manufacturing |
| Photographic matching | The actual item, label, bracket and condition are shown for comparison |
Fitting guide, tools and labour estimate
Typical tools
- Plastic trim-removal tools
- Ratchet and suitable metric sockets
- Suitable Torx bits for the vehicle's installed fasteners
- Calibrated torque wrench
- Small pick or flat trim tool
- Protective gloves and trim protection
- VIN-specific workshop data for fastener type, replacement requirements and torque settings
High-level fitting sequence
- Confirm the replacement label, bracket shape, position and webbing route before dismantling.
- Park securely, switch the ignition off and remove the key. Follow all restraint-system safety precautions in the workshop manual.
- Remove the rear seat sections and rear-left quarter/capping trim as required to expose the reel and lower mounting point.
- Photograph the original routing and orientation. Support the reel while removing the specified mounting fasteners.
- Install the replacement in exactly the same orientation. Ensure the webbing is flat, untwisted and passes through the correct guide.
- Use new locking or microencapsulated fasteners wherever the current repair data requires them. Tighten only to the VIN-specific published torque.
- Refit the trim and seat correctly, ensuring no webbing is trapped or rubbing on sharp edges.
- Test smooth extension, full retraction, buckle engagement and sharp-pull locking before returning the vehicle to service.
Static garage labour calculator
Estimated labour cost = garage hourly rate × 0.5 to 1.0 hours. Parts, VAT treatment, diagnostics, consumables and additional repairs are not included.
| Garage rate | 0.5 hour | 1.0 hour |
|---|---|---|
| £50/hour | £25 | £50 |
| £60/hour | £30 | £60 |
| £70/hour | £35 | £70 |
| £80/hour | £40 | £80 |
| £90/hour | £45 | £90 |
| £100/hour | £50 | £100 |
| £120/hour | £60 | £120 |
Actual item condition and buyer checks
This is a recycled vehicle component. It may show normal storage, handling and age-related marks consistent with its previous service life. The photographs form part of the description and show the supplied item. Please inspect the webbing, bracket, reel casing, tongue and label closely.
Before clicking Buy It Now
- Confirm your vehicle is an R56 3-door Hatch, not another MINI body style.
- Check the vehicle build date on the VIN data, not registration year alone.
- Match 601030000E or verified cross-reference 72112751402 / 2751402.
- Compare the mounting bracket, reel angle, belt tongue, anchor and webbing colour with every photograph.
- Confirm you need the rear-left reel assembly and not the buckle/stalk, guide or front belt.
- If any detail differs, send your VIN and clear photographs of the original label through eBay Messages before ordering.
Stock, handling and dispatch preparation
ThePartPilot holds more than 25,000 vehicle parts in stock at any one time. Parts are organised, visually checked against the listing and prepared for protective packaging before dispatch.
Delivery, address and international orders
- Delivery services and charges shown in the eBay listing apply; no additional delivery promise is made in this description.
- International delivery is available to eligible destinations through eBay's current international shipping programme.
- Destination availability, delivery charges, import charges and any exclusions are calculated and displayed by eBay at checkout.
- Please ensure the delivery address shown at eBay checkout is complete and correct. We can only dispatch to the address supplied with the order and cannot amend it after checkout.
- Import taxes, duties or local charges are controlled by the destination rules and eBay's checkout process where applicable.
Returns, warranty and VAT information
Returns: Returns are handled in line with the eBay return policy and applicable consumer rights. The item must be returned complete and in the condition received. Any deduction, only where legally and platform-permitted, will reflect actual diminished value caused by handling or use beyond what is necessary to inspect the item; no automatic restocking percentage applies.
Fitment responsibility: Please read the listing carefully, review all photos, and confirm fitment before purchasing. If you are unsure, contact us through eBay Messages before ordering so we can help.
Warranty: 30-day parts warranty from delivery, subject to listing terms and statutory rights. Unless required by law, the warranty covers the supplied part only and does not include labour, diagnostics, coding, recovery, consumables or consequential costs.
VAT Global Accounting: VAT is not separately itemised and no reclaimable VAT invoice is available for this item.
Buying a correctly matched recycled vehicle part supports skilled local jobs, keeps serviceable components in circulation and reduces the energy, raw materials and packaging needed to manufacture a replacement from scratch. Thank you for choosing ThePartPilot.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.