MITSUBISHI OUTLANDER MK2 CW7W 08-12 CW8W 08-10 AIRBAG ON OFF SWITCH 8610A054

MITSUBISHI OUTLANDER MK2 CW7W 08-12 CW8W 08-10 AIRBAG ON OFF SWITCH 8610A054

£18.99
Skip to product information
MITSUBISHI OUTLANDER MK2 CW7W 08-12 CW8W 08-10 AIRBAG ON OFF SWITCH 8610A054

MITSUBISHI OUTLANDER MK2 CW7W 08-12 CW8W 08-10 AIRBAG ON OFF SWITCH 8610A054

£18.99
PREMIUM PRE-OWNED VEHICLE PARTS • DETAILED FITMENT SUPPORT • 25,000+ PARTS STOCKED
MITSUBISHI OUTLANDER II / MK2 • CW7W / CW8W • PASSENGER AIRBAG CUT-OFF SWITCH
Mitsubishi Outlander MK2 Passenger Airbag ON / OFF Cut-Off Switch
8610A054

This listing is for a factory-original Mitsubishi passenger airbag ON/OFF cut-off switch assembly as shown in the actual item photographs below.

Catalogue verification confirms part number 8610A054 on specific right-hand-drive Mitsubishi Outlander II / MK2 CW7W and CW8W applications. The catalogue also identifies the corresponding airbag cut-off switch mounting bracket as 8610A003.

⚠ CRITICAL FITMENT INFORMATION

Do not order this part simply because your vehicle is a Mitsubishi Outlander between 2008 and 2012. Fitment changes according to chassis, engine, market, build date and specification. The safest purchasing method is to match 8610A054 against the switch removed from your vehicle and compare the connector, wiring direction, switch body and mounting bracket with our actual photographs.
✓ CONFIRMED CATALOGUE APPLICATIONS

CW7W 2.2 diesel RHD: August 2008 – July 2012
CW8W 2.0 diesel RHD: August 2008 – June 2010
ACTUAL ITEM PHOTOGRAPHS — CHECK THESE BEFORE ORDERING

These are photographs associated with this eBay item. Please use them together with the part number and fitment table rather than relying on model/year alone.

Mitsubishi Outlander passenger airbag cut off switch 8610A054 actual item
THEPARTPILOT • ACTUAL ITEM • FRONT / BRACKET VIEW
Mitsubishi Outlander airbag switch 8610A054 wiring and bracket actual item
THEPARTPILOT • ACTUAL ITEM • SIDE / WIRING VIEW
Mitsubishi 8610A054 airbag on off switch actual item rear view
THEPARTPILOT • ACTUAL ITEM • REAR VIEW
Mitsubishi Outlander passenger airbag cut off switch mounting detail
THEPARTPILOT • CONNECTOR / MOUNTING REFERENCE
Mitsubishi Outlander SRS airbag switch loom reference
THEPARTPILOT • WIRING / PLUG REFERENCE
BUYER CHECK: The physical part in your vehicle should match the photographs above. Pay particular attention to the switch body, electrical plug, locking arrangement, wiring orientation and metal bracket.
ITEM DETAILS & TECHNICAL SPECIFICATION
DETAIL SPECIFICATION
Manufacturer Mitsubishi
Vehicle Family Mitsubishi Outlander II / MK2 — CW platform
Primary Confirmed Chassis CW7W and CW8W — see exact application table below
Component Passenger front airbag ON/OFF / cut-off switch assembly
Manufacturer Part Number 8610A054
Airbag Switch Bracket Reference 8610A003 on the confirmed catalogue applications
Electrical System Supplemental Restraint System / passenger airbag control circuit
Typical Position Passenger-side instrument panel / dashboard area on applicable vehicles
Drive Side Confirmed Right-hand drive catalogue applications
Body Style Outlander II / MK2 5-door SUV on the confirmed applications
Visible Colour Black switch housing with yellow SRS-type electrical wiring/connector visible
Visible Construction Moulded polymer switch housing, insulated wiring and metal mounting bracket
Connector Match the connector shape, lock and wiring orientation to the actual photographs. Pin count is intentionally not guessed.
Condition Pre-owned vehicle component. Please examine the actual item photographs for cosmetic condition and included fittings.
Included Switch assembly, wiring/connector and bracket/fittings shown in the actual item photographs.
Interchange Part Number No separate Mitsubishi interchange number has been sufficiently verified for this listing.
Superseded Part Number No separate superseded Mitsubishi number has been sufficiently verified. Do not assume a different number will interchange.
Warranty 30 days as shown in the eBay listing terms
eBay Item Number 147493783055
CONFIRMED VEHICLE COMPATIBILITY

The table below is deliberately more precise than simply advertising “Outlander 2008–2012”.

MAKE / MODEL CHASSIS ENGINE / CONFIGURATION EXACT CATALOGUE PERIOD STATUS
Mitsubishi Outlander II / MK2
5-door SUV
CW7W 2.2 diesel
RHD
4WD / 5-seater / Euro 4 catalogue configuration
08/2008 – 07/2012 ✓ 8610A054 CONFIRMED
Mitsubishi Outlander II / MK2
5-door SUV
CW8W 2.0 diesel
RHD
4WD / 5-seater / Euro 4 catalogue configuration
08/2008 – 06/2010 ✓ 8610A054 CONFIRMED
WHY THIS TABLE MATTERS:

A CW8W application is not being advertised through 2012 simply because the second-generation Outlander continued beyond June 2010. The exact CW8W 2.0 diesel catalogue entry for this switch ends in June 2010. This distinction is included specifically to help reduce incorrect orders.
OTHER VEHICLE / PART-NUMBER CROSS-REFERENCES

Part number 8610A054 appears in wider Mitsubishi parts cross-reference data against additional Mitsubishi vehicle families. Because exact UK/RHD engine and build-date sub-ranges have not been sufficiently verified for every one of those vehicles, they are not being presented as guaranteed compatibility.

VEHICLE FAMILY CROSS-REFERENCE STATUS BUYING RULE
Mitsubishi Outlander CW family — other engine/specification combinations PART NUMBER MAY CROSS-APPLY Verify 8610A054 directly from the removed switch and compare connector and bracket.
Mitsubishi ASX PART-NUMBER CROSS-REFERENCE ONLY Not advertised here by a guessed year range. Only consider if the removed unit is marked 8610A054 and physically matches.
Mitsubishi Lancer / Lancer Sportback PART-NUMBER CROSS-REFERENCE ONLY Exact build/application must be checked before purchase.
Mitsubishi i-MiEV PART-NUMBER CROSS-REFERENCE ONLY Exact build/application must be checked before purchase.
IMPORTANT: The cross-reference rows above do not override the confirmed Outlander compatibility table. They exist to help owners identify the same part number on another vehicle, not to encourage ordering from appearance alone.
WHAT THIS LISTING DOES NOT AUTOMATICALLY CONFIRM
VEHICLE / SITUATION STATUS WHY
CW7W built before 08/2008 ✗ NOT CONFIRMED Outside the exact verified catalogue period used for this listing.
CW7W built after 07/2012 ✗ NOT CONFIRMED Outside the exact verified catalogue period used for this listing.
CW8W 2.0 diesel built after 06/2010 ✗ NOT CONFIRMED The verified CW8W switch application ends in June 2010.
First-generation Outlander / CU-series ✗ NOT CONFIRMED Different generation. Do not buy from the Outlander name alone.
Third-generation Outlander / later PHEV applications ✗ NOT CONFIRMED Different generation and electrical architecture.
Left-hand-drive vehicle VERIFY FIRST The exact catalogue applications verified for this description are right-hand-drive.
Your removed switch carries a different part number ✗ DO NOT ASSUME FITMENT A visually similar switch may have a different electrical or mounting specification.
THEPARTPILOT CORRECT-PART CHECKLIST

We want customers to order the correct part the first time. Before pressing Buy It Now, please check:

  • Your removed switch carries or correctly cross-references 8610A054.
  • Your chassis and exact build period fall within a confirmed application where applicable.
  • The switch face and body shape match the actual photographs.
  • The electrical connector shape and locking arrangement match.
  • The wiring direction and length appear equivalent.
  • The mounting bracket position and fixing points match.
  • Your vehicle is right-hand drive where relying on the exact catalogue applications stated above.
  • If anything is uncertain, send your VIN/chassis information and a photograph of your original component through eBay Messages before purchase.
IMAGE + PART NUMBER = BEST MATCHING METHOD

Vehicle registration lookups and marketplace compatibility suggestions can occasionally be incomplete. For this type of electrical component, we recommend combining the chassis/build information with the physical part number and photographs.
CORRECT VEHICLE GENERATION REFERENCE — 5-DOOR OUTLANDER

The photograph below shows the correct second-generation Mitsubishi Outlander 5-door SUV shape for visual generation reference. It is not the donor vehicle and is not a photograph of the part being sold.

Second generation Mitsubishi Outlander 5 door SUV reference vehicle
VEHICLE REFERENCE • OUTLANDER II / MK2 • 5-DOOR SUV
Reference vehicle photograph only — not the donor vehicle and not evidence of compatibility by itself.
WHERE IS THE AIRBAG CUT-OFF SWITCH FITTED?

Mitsubishi catalogues place 8610A054 within the switch group around the instrument panel. On applicable right-hand-drive Outlander configurations the passenger airbag cut-off control is associated with the passenger-side dashboard/instrument-panel area.

Mitsubishi Outlander second generation dashboard interior reference
LOCATION REFERENCE • PASSENGER-SIDE DASH / INSTRUMENT-PANEL AREA
Interior reference image only. Exact panel access and switch position can vary with market and dashboard specification.
DO NOT DISMANTLE THE DASHBOARD TO CHECK FITMENT FIRST. If the switch can be identified without disturbing SRS components, photograph the existing unit/number and compare before ordering.
WHAT DOES THIS PART DO?

This switch forms part of the vehicle's Supplemental Restraint System on vehicles equipped with a passenger-airbag cut-off facility.

PASSENGER AIRBAG SELECTION
Provides the user interface for the passenger-front-airbag enabled/disabled function where fitted.
VEHICLE-SPECIFIC ELECTRICAL PART
The switch is part of a vehicle-specific electrical/SRS circuit. It should not be treated as a universal dashboard switch.
CONNECTOR & BRACKET MATTER
Correct electrical connection and correct mechanical mounting are both important, which is why physical comparison is recommended.
POSSIBLE SYMPTOMS OF A FAULTY AIRBAG CUT-OFF SWITCH

Depending on the actual underlying fault, symptoms associated with the switch or its circuit may include:

⚠ SRS / AIRBAG WARNING
An SRS or airbag warning lamp remains illuminated or a related warning appears.
⚠ INCORRECT STATUS
Passenger-airbag ON/OFF status does not correspond correctly with switch selection.
⚠ INTERMITTENT OPERATION
Passenger-airbag status changes intermittently or the switch does not respond consistently.
⚠ STORED SRS FAULT
An appropriate diagnostic scan may identify a fault within the related circuit.
DIAGNOSTIC WARNING:

These symptoms do not prove the switch itself has failed. Wiring damage, poor connections, control-unit faults or other SRS-system components can create similar symptoms. Proper diagnosis should be carried out before parts are replaced.
WHY CHOOSE A MATCHED FACTORY-ORIGINAL COMPONENT?

A correctly matched factory-original component was produced around the vehicle's original electrical connector, mounting arrangement, dashboard layout and system requirements.

CORRECT PHYSICAL DESIGN
Original mounting geometry and connector design can make fitment more predictable when the correct part number is matched.
REDUCED GUESSWORK
Matching the same manufacturer part number removes much of the uncertainty associated with an unverified low-cost copy that merely looks similar.
BETTER VALUE
A serviceable pre-owned factory-original component can represent a substantial saving compared with purchasing a new replacement.
SUPPORTS REUSE
Reusing suitable vehicle components keeps useful parts in circulation and reduces unnecessary disposal.
POTENTIAL SAVINGS COMPARED WITH BUYING NEW
Across suitable pre-owned vehicle parts, savings can be substantial and in some cases may approach around 70% compared with equivalent new-part pricing. Actual saving varies according to the component and current new retail price.
FITTING INFORMATION
⚠ SRS SAFETY-CRITICAL COMPONENT

Airbag and Supplemental Restraint System circuits require appropriate workshop procedures. Incorrect handling can result in warning faults, system non-operation or other safety risks. Professional installation by a competent technician with appropriate Mitsubishi service information and SRS diagnostic equipment is strongly recommended.
Typical Tools Required
  • Non-marring plastic trim-removal tools.
  • Suitable hand tools for the dashboard/trim fasteners fitted to your vehicle.
  • Suitable tool for the 12V battery terminal where required by the workshop procedure.
  • Small screwdriver/Torx/Phillips tools where applicable to the trim fitted.
  • SRS-capable diagnostic scanner for fault/status verification.
  • Correct vehicle-specific workshop information.
Exact screw/socket sizes are intentionally not guessed because trim and dashboard specification can vary.
General Replacement Procedure
STEP 1 — Confirm the fault first.
Carry out appropriate SRS diagnostics before replacing the switch.
STEP 2 — Confirm the replacement part.
Before disconnecting the original component, compare its number, body, plug, wiring orientation and bracket with 8610A054 shown in this listing.
STEP 3 — Make the vehicle safe.
Switch the vehicle fully off and follow the manufacturer-prescribed SRS shutdown/isolation procedure for the exact vehicle.
STEP 4 — Observe the specified waiting period.
Follow the manufacturer's SRS discharge/wait-time instructions before disturbing restraint-system wiring.
STEP 5 — Remove only the required trim.
Carefully remove the necessary passenger-side instrument-panel/dashboard trim to gain access without damaging clips or panels.
STEP 6 — Release the electrical connection correctly.
Use the connector's intended locking mechanism. Do not force, short, bridge or incorrectly probe SRS-related terminals.
STEP 7 — Remove the original switch/bracket.
Note its exact mounting position and loom routing before removal.
STEP 8 — Install the replacement.
Fit the replacement assembly in the correct orientation without placing tension or twisting force on the wiring.
STEP 9 — Reconnect and reassemble.
Ensure the electrical connector is correctly seated/locked and carefully refit the dashboard trim.
STEP 10 — Restore the system correctly.
Follow the manufacturer procedure for restoring vehicle power/SRS operation.
STEP 11 — Verify operation.
Confirm the expected passenger-airbag status indication and carry out an appropriate SRS diagnostic scan.
If an SRS warning remains after installation, do not simply assume the replacement switch is defective. Diagnose the complete related circuit.
ESTIMATED REPAIR TIME
APPROX. 0.3 – 0.7 LABOUR HOURS
Approximately 20–45 minutes for a straightforward switch replacement where trim access is normal.

This is a general workshop estimate only, not a manufacturer flat-rate time.

Additional diagnostic work, damaged trim clips, previous repairs, wiring faults, seized fittings or unexpected access issues can increase the actual repair time.

GARAGE LABOUR COST CALCULATOR — STATIC EBAY-SAFE TABLE

eBay listings cannot use an active JavaScript calculator, so the table below provides the calculation in advance.

GARAGE HOURLY RATE × ESTIMATED LABOUR TIME = APPROXIMATE LABOUR COST

GARAGE RATE 0.3 HOURS 0.5 HOURS 0.7 HOURS
£40 / hour £12 £20 £28
£50 / hour £15 £25 £35
£60 / hour £18 £30 £42
£70 / hour £21 £35 £49
£80 / hour £24 £40 £56
£90 / hour £27 £45 £63
£100 / hour £30 £50 £70
£120 / hour £36 £60 £84
£150 / hour £45 £75 £105
Labour-only illustration. Diagnostic charges, consumables, additional repairs and any other garage charges are not included. Actual labour time and hourly rate vary by garage and vehicle condition.
FITTING SERVICE SUBJECT TO AVAILABILITY

ThePartPilot may be able to assist with fitting depending on the part, vehicle, workshop capacity and appointment availability.

Please enquire through eBay Messages before travelling or making arrangements.

Illustrative automotive workshop and repair service
🔧 FITTING MAY BE AVAILABLE • SUBJECT TO WORKSHOP CAPACITY
Illustrative workshop image only — not a photograph of our actual premises.
25,000+ VEHICLE PARTS IN STOCK

ThePartPilot carries more than 25,000 vehicle parts in stock and on the shelf at any one time, covering a wide range of mechanical, electrical, interior, body and trim components.

Our aim is to combine clear photographs, strong part-number identification and detailed compatibility information so customers can make a more informed buying decision and reduce avoidable returns.

Illustrative warehouse storage and boxed stock
📦 25,000+ PARTS STOCKED • READY FOR CUSTOMER ORDERS
Illustrative warehouse image only — not a photograph of our actual premises.
INTERNATIONAL DELIVERY THROUGH eBAY GLOBAL SHIPPING PROGRAMME

Eligible orders can be supplied internationally using eBay's Global Shipping Programme. eBay manages the international leg, applicable customs processing and destination availability.

Current EU GSP Destinations

Austria • Belgium • Bulgaria • Croatia • Cyprus • Czech Republic • Denmark • Estonia • Finland • France • Germany • Greece • Hungary • Ireland • Italy • Latvia • Lithuania • Luxembourg • Malta • Netherlands • Poland • Portugal • Romania • Slovakia • Slovenia • Spain • Sweden

Current Non-EU GSP Destinations

Antigua and Barbuda • Aruba • Australia • Bahamas • Bahrain • Bangladesh • Barbados • Belize • Bermuda • Bolivia • Brazil • Brunei Darussalam • Cambodia • Canada • Cayman Islands • Chile • China • Colombia • Costa Rica • Dominica • Dominican Republic • Ecuador • Egypt • El Salvador • French Guiana • Grenada • Guadeloupe • Guatemala • Guernsey • Honduras • Hong Kong • Iceland • Indonesia • Israel • Jamaica • Japan • Jersey • Jordan • Kuwait • Liechtenstein • Macau • Malaysia • Maldives • Martinique • Mexico • Monaco • Montserrat • New Zealand • Nicaragua • Norway • Oman • Pakistan • Panama • Paraguay • Peru • Philippines • Qatar • Reunion • Saint Kitts and Nevis • Saint Lucia • Saudi Arabia • Singapore • South Africa • South Korea • Sri Lanka • Switzerland • Taiwan • Thailand • Trinidad and Tobago • Turks & Caicos Island • UAE • Ukraine • Uruguay • USA • Vietnam

GSP AVAILABILITY: eBay can change programme destinations, item eligibility, delivery services and charges. The options displayed by eBay at checkout are the final confirmation for your individual order.
PLEASE CHECK YOUR CHECKOUT ADDRESS BEFORE PAYMENT
📦 DELIVERY ADDRESS IS IMPORTANT

Please make sure your eBay checkout address is complete and correct before completing payment. For transaction security and delivery requirements, we cannot simply redirect an order to a different address supplied later in a message. If your address is wrong, use the appropriate eBay order process rather than sending an alternative delivery address after purchase.
RETURNS, FITMENT & CONDITION

We provide detailed part-number, photograph and fitment information to help customers identify the correct component before installation.

Please compare the replacement with your original part before fitting, modifying or connecting it.

UNSURE ABOUT FITMENT?

Contact us through eBay Messages before purchase with your VIN/chassis details and a clear photograph of the original component/part number. We would rather help check the part before purchase than have you order an unsuitable component.

Returns are handled in accordance with the return terms shown on the eBay listing and applicable eBay policy.

If a returned item comes back installed, altered, damaged, incomplete or otherwise in a different condition from when supplied, an eligible deduction of up to 50% may be made where eBay policy permits, reflecting the actual loss in value.

Any such deduction is based on the condition and actual loss in value of the returned item and is not an automatic charge merely because a particular return reason was selected.

VAT / GLOBAL ACCOUNTING INFORMATION
This qualifying second-hand component is sold under the Global Accounting VAT margin scheme where applicable. VAT is accounted for within the applicable margin and is not separately itemised on the sale price. No separately reclaimable VAT amount is shown for the margin-scheme sale.
CAREFUL PACKING & DISPATCH

Electrical components require sensible protection during transit. Particular attention is given to vulnerable connectors, brackets, switch faces and wiring when preparing vehicle parts for dispatch.

Illustrative boxed stock and warehouse dispatch
📦 PACKED FOR DISPATCH • PARTS PREPARED WITH TRANSIT PROTECTION IN MIND
Illustrative dispatch/storage image only — not a photograph of our actual premises.
SUPPORT A LOCAL SMALL BUSINESS & KEEP GOOD PARTS IN USE ♻️

Thank you for considering ThePartPilot. Every order supports an independent UK vehicle-parts business and helps us continue identifying, storing and supplying thousands of reusable automotive components.

Choosing a serviceable pre-owned component helps keep useful vehicle parts in circulation rather than unnecessarily disposing of them. Reuse can also reduce demand for the manufacture, packaging and transport of a completely new replacement.

🚗 REPAIR   •   🔧 REUSE   •   ♻️ RECYCLE   •   📦 REDISPATCH

For us, responsible vehicle dismantling is not simply about selling a part. It is about identifying usable components correctly, helping customers repair vehicles economically and extending the useful life of parts that still have value.

FINAL CHECK BEFORE YOU BUY
DO NOT ORDER UNTIL YOU HAVE CHECKED:

✓ PART NUMBER 8610A054
✓ CHASSIS / BUILD DATE
✓ CONNECTOR SHAPE
✓ WIRING ORIENTATION
✓ SWITCH BODY
✓ METAL BRACKET
✓ RIGHT-HAND-DRIVE APPLICATION WHERE RELYING ON OUR CONFIRMED TABLE

IF YOUR ORIGINAL PART NUMBER IS DIFFERENT, DO NOT ASSUME THIS SWITCH WILL FIT JUST BECAUSE THE VEHICLE IS AN OUTLANDER.
NEED HELP BEFORE BUYING?

Send the VIN/chassis details and a clear photograph of the original part through eBay Messages. Fitment assistance is available using the information provided.

You may also like