Nissan Juke F15 Mk1 2011 5 Door Passenger Left Dashboard Air Vent N/S/F Silver
Nissan Juke F15 Mk1 2011 5 Door Passenger Left Dashboard Air Vent N/S/F Silver
Nissan Juke F15 Mk1 2011 5 Door
Passenger Left Dashboard Air Vent
⚠️ Read This Before Ordering — Exact Fitment Matters
The actual used part shown in this listing is marked “JUKE 2011 N/S/F”, identifying its donor application as a 2011 Nissan Juke and its position as nearside/front-left.
Nissan Juke F15 dashboard vents can vary by production period, trim, finish and market. The manufacturer part number is not clearly readable on this physical item. Therefore, fitment beyond the donor-confirmed application requires comparison with your original vent and, where necessary, VIN/parts-catalogue verification.
📸 Actual Item You Are Buying
These are photographs of the actual used dashboard vent from this listing. Please study the front finish, rear housing, mounting points and donor marking before ordering.
Compare bezel colour, circular profile and louvre design.
Compare every mounting ear, tab, duct shape and rear profile.
This is the strongest year/position evidence visible on the item.
🚗 Vehicle & Fitting-Location Reference
5-door Juke body shown for generation identification only. Vehicle is not included and exterior specification may differ.
On a UK/right-hand-drive Juke this part is fitted at the far-left outer edge of the dashboard adjacent to the passenger door/A-pillar. Interior trim and finish may differ by specification.
✅ Compatibility & ❌ Non-Fitment Chart
This chart deliberately separates what the physical item supports from applications that still need VIN / old-part verification.
| Vehicle | Year | Body | Position | Status |
|---|---|---|---|---|
| Nissan Juke F15 Mk1 | 2011 | 5 Door | UK RHD front-left / nearside / passenger outer dashboard vent |
DONOR-CONFIRMED APPLICATION Still compare your old vent, mounts and finish before ordering. |
| Nissan Juke F15 Mk1 | 2010 | 5 Door | Left outer vent |
NOT CONFIRMED FROM THIS ITEM VIN / old-part number and physical comparison required. |
| Nissan Juke F15 Mk1 | 2012–2019 | 5 Door | Left outer vent |
DO NOT ASSUME FITMENT BY YEAR Production/trim/market variations exist. Verify before purchase. |
| Nissan Juke F16 / second generation | 2019 onward | 5 Door | Dashboard |
DOES NOT FIT Different vehicle/dashboard generation. |
| Nissan Juke F15 — UK RHD | Any | 5 Door | Driver / right-hand outer dashboard vent | WRONG SIDE |
| Nissan Juke F15 | Any | 5 Door | Centre dashboard vents | WRONG PART / WRONG LOCATION |
| Other Nissan / Infiniti models | Any | Any | Any | NO CROSS-MODEL INTERCHANGE CONFIRMED |
The rear mounting ears, tabs, duct profile, bezel finish and position must agree with your original part. If anything is different, stop and request fitment verification before purchasing.
🔎 Part Number & Identification Information
Do not enter them into your buying decision without comparing the number on your removed part or obtaining VIN-based verification.
📋 Part Details
Exact polymer grade is not claimed because no readable material code has been confirmed from the listing photographs.
💨 What This Part Does
The side ventilator grille forms the passenger-side outer outlet of the vehicle's HVAC ducting. Its louvres allow the occupant to aim the incoming air and control the direction of airflow at the outer dashboard outlet.
This vent itself does not operate the heater matrix, air-conditioning compressor, blower motor or climate-control electronics. It is the final mechanical outlet through which conditioned air enters the passenger compartment at this dashboard position.
🛠️ Symptoms of a Damaged or Faulty Dashboard Vent
- Broken, missing or loose internal louvres.
- Air direction will no longer remain where it is set.
- Vent shutter sticks, jams or cannot be adjusted correctly.
- Cracked silver/grey bezel or visible cosmetic damage.
- Broken rear mounting tabs causing movement or rattling.
- Rattle or vibration from a loose housing while driving.
- Air leakage around the vent where a duct seal has been damaged.
- Vent cannot be aimed or closed as intended.
⭐ Why Choose an Original Factory-Fit Used Part?
When the part number, mounting points and specification are correctly matched, an original factory-installed component retains the geometry, dashboard finish, duct interface and mounting arrangement designed for that vehicle.
Low-cost reproduction components can vary in plastic finish, colour, louvre movement, clip geometry and overall fit. Reusing a serviceable original component can also provide a substantial cost advantage over a brand-new replacement while keeping another usable automotive component in service.
Savings vary by component and current new-part pricing, so compare the correct new part number for your VIN rather than relying on a fixed percentage claim.
🎯 Buy the Correct Part First Time
- Confirm your vehicle is a Nissan Juke F15 Mk1, not the later F16 generation.
- Confirm you require the front-left / nearside / passenger outer dashboard vent on a UK right-hand-drive vehicle.
- Compare your old vent directly with all three actual-item photographs.
- Compare rear mounting ears, clips/tabs and air-duct profile — not merely the visible front bezel.
- Check the number moulded, printed or labelled on your original part wherever possible.
- If your old number, vehicle year, dashboard finish or mount layout differs, request verification before purchasing.
- For uncertain applications, provide the full 17-character VIN plus a clear photograph of the old part and its rear mounting side.
🔧 Fitting Information
Factory-Style Procedure Overview
- Confirm the replacement part and your original component match before dismantling the vehicle.
- Switch the ignition OFF, isolate the battery negative terminal and observe the service-manual waiting period before working around SRS components.
- Protect dashboard, console and trim surfaces with suitable protective material.
- Follow the correct F15 service procedure for removal of the necessary console, trim, audio/instrument-panel and passenger-side components applicable to your vehicle specification.
- The factory-style procedure requires removal of the instrument-panel assembly to access the side ventilator grille correctly.
- Use a second person where specified when handling the complete instrument panel.
- With access obtained from the rear, remove the vent fixing screws / retainers and remove the side ventilator grille.
- Compare the removed component directly against this replacement, including housing, tabs, fixing points and duct seal.
- Inspect the surrounding duct and foam sealing surfaces before installing the replacement.
- Reassemble in reverse order using the vehicle-specific service data for fastener locations, replacement clips and torque settings. Do not guess torque values.
- Reconnect the battery in accordance with service information and confirm SRS warning-light, switches, audio and HVAC operation before returning the vehicle to use.
Recommended Tools / Equipment
- Quality plastic trim-removal tools.
- Ratchet and suitable metric socket set with extensions.
- Suitable screwdriver / bit set.
- Torque wrench for service-data specified fasteners.
- Protective dashboard tape, cloths and trim protection.
- Correct F15 service information for the exact vehicle specification.
- Appropriate SRS-safe workshop practices and equipment.
- A second technician/person where required for dashboard handling.
£ Garage Labour Cost Calculator
eBay descriptions cannot use a JavaScript live calculator, so use this static labour-rate chart. Find your garage's hourly rate and read across to the estimated labour time.
| Garage Rate | 3 Hours | 3.5 Hours | 4 Hours |
|---|---|---|---|
| £50/hr | £150 | £175 | £200 |
| £60/hr | £180 | £210 | £240 |
| £75/hr | £225 | £262.50 | £300 |
| £90/hr | £270 | £315 | £360 |
| £100/hr | £300 | £350 | £400 |
| £120/hr | £360 | £420 | £480 |
| £150/hr | £450 | £525 | £600 |
Labour examples are estimates only and exclude the part, diagnostics, consumables, replacement fasteners/clips, VAT treatment at the repairer and any additional faults found during dismantling.
👨🔧 Fitting & Repair Service Available
ThePartPilot can also offer fitting and vehicle repair services subject to workshop availability.
Please arrange availability through eBay's permitted on-platform contact method before purchasing or travelling. Do not assume a same-day workshop slot is available without prior confirmation.
🏭 More Than 25,000 Parts In Stock
ThePartPilot carries more than 25,000 automotive parts in stock and on the shelf at any one time, helping us supply replacement components quickly and giving customers access to a wide range of used vehicle parts.
🌍 International Delivery Through eBay
International delivery is available through eBay's Global Shipping Programme where eBay offers the service for this item and destination. eBay controls final country eligibility, import processing, restricted destinations and the international charge shown at checkout.
European Destinations
Other Current Programme Destinations
Destination availability can change and certain products/destinations can be restricted. The options actually displayed by eBay at checkout are the final authority for an individual order.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
📦 Important Checkout & Delivery Information
Orders are dispatched to the delivery address shown on the eBay order. Please make sure the correct address is selected before payment. Address changes should not be assumed possible after the order has been placed.
↩️ Returns & Fitment Responsibility
Our objective is to prevent unnecessary returns by providing clear photographs, location information, fitment warnings and identification guidance before purchase.
Returns are handled in accordance with the live return policy displayed on the eBay listing and applicable eBay rules. Returned components should be the same item supplied, securely packaged and returned in the condition required by the applicable policy.
Where eBay policy permits a deduction because a returned item has suffered an actual loss in value through use, damage, missing parts or inadequate return packaging, any deduction is handled in accordance with that policy.
🧾 VAT Information
Where this used item is sold under the applicable VAT Global Accounting / Margin Scheme, VAT is accounted for within the scheme and is not shown separately as a reclaimable VAT amount on the sales invoice.
♻️ Support Used Parts • Support Small Business
🚗 Choosing a serviceable used automotive component keeps an existing part in productive use rather than immediately replacing it with a newly manufactured item.
♻️ Reuse helps extend the useful life of components, reduces avoidable waste and supports a more circular approach to vehicle repair.
🛠️ Buying from an independent automotive parts business also supports the people involved in identifying, storing, checking, packing and supplying replacement components to keep vehicles on the road.
📦 Our aim is simple: provide enough information for you to identify the correct part first time, receive the right component and avoid an unnecessary return.
📦 Stock, Packing & Dispatch
Used automotive parts should be protected according to their shape, finish and fragility during dispatch. Please retain suitable packaging until you have confirmed that the supplied component is correct for your vehicle.