NISSAN MICRA C+C K12 2005-2009 RIGHT FRONT CONVERTIBLE ROOF LOCK 8200220672
£18.98
Skip to product information
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
NISSAN MICRA C+C K12 2005-2009 RIGHT FRONT CONVERTIBLE ROOF LOCK 8200220672
£18.98
IMPORTANT PHOTO-VERIFIED CORRECTION
The donor information identifies this as a 2006 Nissan Micra C+C 1.4 petrol, 65 kW roof-lock component. The photographed item carries the visible marking 8200220672. Nissan's parts catalogue lists the complete centre folding-roof lock under 97096-BC100, so the visible number must not be used as the only proof of compatibility. Match the old unit's shape, right-hand position, mounting points and all visible details before ordering.
Actual Item Photographs
Actual part supplied
|
Visible component marking: 8200220672
|
Right / offside identification view
|
Latch mechanism and mounting profile
|
You will receive the photographed used item. Cosmetic marks, identification writing and normal storage wear may be present. Study every image before ordering.
Exact Part Specification
| Vehicle manufacturer | Nissan |
| Model / body | Micra C+C / CK12E, 2-door coupe-convertible with retractable hardtop |
| Part type | Folding roof lock / latch component, right upper position |
| Visible number on item | 8200220672 |
| Side | Right / offside / UK driver side |
| Position | Upper/right locking area within the folding hardtop mechanism; compare the old unit before purchase |
| Electrical connection | Electrical pin count is not clearly confirmed from the photographs; compare the original unit |
| Construction | Mixed metal latch body, coated mounting plate and moulded electrical components, as photographed |
| Condition | Used original vehicle part |
| What is supplied | The lock/latch assembly shown only; no additional trim, striker, control module or fixing hardware unless pictured |
Correct Reference Vehicle: 2-Door Nissan Micra C+C
Nissan Micra C+C 1.4 with retractable hardtop closed
|
Same 2-door Micra C+C body from the rear
|
FITTING LOCATION:
This part is listed for the right-hand / offside upper locking area of the Micra C+C retractable hardtop system. On a UK right-hand-drive car, offside means the driver side. The reference photographs show the correct 2-door Micra C+C body. Use the actual-item photographs to identify the exact component and mounting shape.
This part is listed for the right-hand / offside upper locking area of the Micra C+C retractable hardtop system. On a UK right-hand-drive car, offside means the driver side. The reference photographs show the correct 2-door Micra C+C body. Use the actual-item photographs to identify the exact component and mounting shape.
Reference vehicle image credits: Vauxford, CC BY-SA 4.0 via Wikimedia Commons. Reference vehicles only; the actual item is shown separately.
Compatibility Chart
| Make | Model / chassis | Body | Years | Engine evidence | Fitment condition |
|---|---|---|---|---|---|
| Nissan | Micra C+C / CK12E | 2-door retractable hardtop | 09/2005-09/2007 | 1.4 petrol CR14DE; 1.6 petrol HR16DE. Manual, plus applicable 1.6 automatic versions. | Match 8200220672 marking, right-side position, mounting shape and original component |
| Nissan | Micra C+C / CK12E facelift | 2-door retractable hardtop | 09/2007-03/2009 | 1.4 petrol CR14DE; 1.6 petrol HR16DE, manual or applicable automatic versions | Verify against the old part; the Nissan complete-lock catalogue number is 97096-BC100 |
No other vehicle model has been safely confirmed for the photographed component. The Nissan catalogue identifies the complete centre folding-roof lock as 97096-BC100; the visible 8200220672 marking may be a component or casting number. Registration alone is not enough—compare the old part and photographs.
This Part Will Not Fit
| ✕ | Nissan Micra K12 3-door or 5-door hatchback—this listing is for the C+C retractable-hardtop model only. |
| ✕ | Left / nearside / UK passenger-side roof-lock components. |
| ✕ | Micra models built outside the C+C CK12E production range of September 2005 to March 2009. |
| ✕ | Any car whose original component has a different mounting pattern, latch profile, cable or electrical arrangement. |
| ✕ | Any application based only on the 8200220672 marking without a photograph and shape comparison. |
How To Confirm Fitment Before Ordering
1. Remove or clearly view your old roof lock and locate the moulded number.
2. Check whether the old component carries 8200220672, then compare every visible detail. The marking alone is not conclusive.
3. Confirm your vehicle is a 2-door Nissan Micra C+C / CK12E, built from September 2005 to March 2009—not a K12 hatchback.
4. Confirm the part is required for the right / offside / UK driver side.
5. Compare the cable or connector arrangement, mounting holes, latch opening, lever positions and complete casing shape with every photograph.
6. When unsure, send your registration or VIN plus a clear photograph of the old part and its number through eBay Messages before purchase.
Where It Fits & What It Controls
The lock is part of the Nissan Micra C+C retractable hardtop mechanism. It helps secure and locate the right-hand side of the roof during the closing sequence. Depending on the exact assembly, the mechanism may also interact with cables, switches or position sensing used by the roof-control system. Correct alignment matters because similar symptoms can also be caused by wiring, hydraulic components, another sensor, roof adjustment or a different latch.
Possible Fault Symptoms
| ◆ | Convertible roof stops, pauses or reverses during opening or closing. |
| ◆ | Roof warning message, warning lamp or buzzer remains active after the roof appears closed. |
| ◆ | Right-hand side does not latch or release consistently. |
| ◆ | Intermittent operation caused by a worn or misreporting microswitch. |
| ◆ | Uneven roof closure, movement, rattling, wind noise or water ingress from incomplete locking. |
These symptoms are diagnostic clues only. Confirm the fault before fitting because wiring, hydraulic components, roof alignment, other sensors and the opposite-side latch can cause similar problems.
Why Choose A Used Original Manufacturer Part?
A factory-made used part retains the intended mounting geometry, latch profile, connector design and switch position for the vehicle system. A low-cost copy may use different tolerances or materials, which can create alignment or signal issues in a complex folding-roof mechanism. Buying a serviceable used original part also keeps an existing component in use and can save a substantial amount compared with a new replacement. Depending on the part and current new price, savings can sometimes approach 70%.
Professional Fitting Guide
Convertible roof mechanisms are heavy and can move unexpectedly. A competent mechanic or convertible-roof specialist should perform this repair. Support the roof safely and follow Nissan workshop procedures.
1. Record radio settings if needed, switch off the ignition and isolate the battery in accordance with vehicle guidance.
2. Place the folding roof in the correct service position using workshop instructions. Support moving sections securely.
3. Remove only the trim needed to access the right-hand roof lock. Protect painted and glazed surfaces.
4. Photograph the original cable and wiring route. Mark the old lock position before loosening it to preserve an alignment reference.
5. Disconnect the 2-pin switch connection without pulling on the wires. Remove the lock fasteners while supporting the assembly.
6. Compare old and replacement parts side by side: number, side, connector, mounting holes, latch opening and switch movement must match.
7. Install the replacement loosely, align it to the previous marks and tighten using the correct Nissan torque values. Do not invent or over-tighten fastener settings.
8. Reconnect the switch and battery, then perform any roof initialization or diagnostic procedure required by the vehicle.
9. Test several complete roof cycles while watching both sides. Check secure locking, warning indications, wind noise and water sealing before returning the vehicle to service.
Tools, Repair Time & Labour Guide
| Required item | Purpose |
|---|---|
| Plastic trim tools and protective tape | Access without marking trim, glass or paint |
| Torx and metric socket set, ratchet and screwdrivers | Remove trim and latch fasteners |
| Paint marker or masking tape | Record original alignment position |
| Torque wrench and Nissan workshop data | Correct reassembly |
| Multimeter and compatible diagnostic equipment | Check switch state, wiring and stored roof faults |
| Suitable roof supports and a second technician | Control and protect moving roof sections |
Planning time: approximately 1.0 to 2.0 labour hours for a direct replacement and alignment where the fault is already confirmed. Diagnosis, seized fixings, wiring repair, roof synchronization or major adjustment may take longer.
Static Garage Labour Calculator
Calculation: hourly rate × labour time. Parts, diagnosis, VAT and extra work are not added below.
| Garage rate | 1.0 hour | 1.5 hours | 2.0 hours |
|---|---|---|---|
| £60/hour | £60 | £90 | £120 |
| £75/hour | £75 | £112.50 | £150 |
| £90/hour | £90 | £135 | £180 |
| £120/hour | £120 | £180 | £240 |
Fitting service may be available subject to workshop capacity. Ask through eBay Messages before travelling or purchasing fitting.
THEPARTPILOT Buyer Benefits
|
📦 25,000+ parts Large UK stock held on the shelf and ready for processing. |
🛡 3-month warranty Warranty support subject to the listing terms and correct professional fitment. |
|
🚚 Fast tracked dispatch Orders completed before 3pm are prepared for tracked next-working-day dispatch where the selected service permits. |
🔧 Technical fitment support Send the registration or VIN and old-part photograph through eBay Messages before ordering. |
|
🌍 International delivery Eligible overseas destinations are shown by eBay at checkout through the Global Shipping Programme. |
♻ Reuse before replacement Quality used parts reduce waste and extend the working life of existing components. |
Dispatch, Address, VAT & Returns
Checkout address: Orders can only be sent to the delivery address recorded by eBay at checkout. Please check it carefully before paying because it cannot be changed after the order is completed.
International orders: Destination availability, delivery charges, import charges and customs handling are displayed and managed by eBay at checkout. Not every item is available to every country.
VAT margin scheme: VAT is not shown separately on the invoice and cannot be reclaimed.
Returns: Please use the compatibility chart and identification steps before ordering. Returns must be opened through eBay and the item must be sent back in the same condition, with identification and security markings intact. Buyer and seller protections remain governed by the eBay return settings and eBay Money Back Guarantee.
Collection: Collection may be available by prior appointment. Arrange and confirm through eBay Messages before travelling.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Support A Local Small Business 🌍♻️
Every used component purchased from THEPARTPILOT supports a specialist independent UK business and helps keep a serviceable vehicle part in circulation. Reusing tested automotive components can reduce demand for new manufacturing, packaging and disposal while giving customers a cost-effective repair option. Thank you for choosing repair, reuse and responsible motoring.