Nissan Micra K12 2003-2010 RHD Dash Coin Pocket Tray 68855-AXxxx
Nissan Micra K12 2003-2010 RHD Dash Coin Pocket Tray 68855-AXxxx
The photographs confirm a right-hand-drive Nissan pocket from the 68855-AXxxx mould family, but the final suffix is not visible. Nissan used several visually similar colour and trim-code versions. Do not order by model or registration year alone. Send the full 17-character VIN and a clear photo of your original pocket, including its complete number, colour and mounting points, through eBay Messages.
Actual Item Photographs
These are photographs of the used component offered for sale. Review every image for colour, grain, mounting points and cosmetic condition.
THEPARTPILOT
Actual item: textured front face and folding storage pocket.
THEPARTPILOT
Actual item: side profile, hinge area and rear construction.
THEPARTPILOT
Actual item: mounting geometry must match your original part.
THEPARTPILOT
Moulded marking visible in the photographs: 68855 Axxxx RHD. The complete service-part suffix is not shown.
THEPARTPILOT
Actual item: pocket and opening movement.
THEPARTPILOT
Actual item: inspect all surfaces and fixing areas before purchase.
Vehicle and Fitting-Location Reference
3-DOOR REFERENCE
Reference vehicle only: Nissan Micra K12 three-door hatchback. Photo by Rudolf Stricker via Wikimedia Commons; commercial reuse permitted with attribution. VIN confirmation remains essential.
5-DOOR REFERENCE
Reference vehicle only: Nissan Micra K12 five-door hatchback. Public-domain reference image via Wikimedia Commons. VIN confirmation remains essential.
LOWER DRIVER-SIDE DASH
Location reference only: fitted in the lower driver-side instrument panel / knee-area trim on right-hand-drive K12 vehicles, below and to the side of the steering wheel. Public-domain reference image via Wikimedia Commons.
Part Identification and Function
Part type
Manual fold-down coin and small-item storage pocket / dashboard tray.
Position
Front lower driver-side dashboard / instrument-panel area on right-hand-drive vehicles.
Operation
Mechanical storage component. It does not control an electrical, engine or safety system.
Visible family mark
68855 Axxxx RHD. This is not a readable complete service-part number.
Construction
Textured moulded interior plastic with rear support / mounting structure and hinge mechanism.
Condition
Used component. Expect age-related cosmetic marks. Supplied exactly as pictured.
Compatibility Chart - Read Before Purchase
| Vehicle | Exact catalogue period | Status | Required checks |
|---|---|---|---|
| Nissan Micra K12 / K12E, RHD, 3-door hatchback | Build 08/2003 to 07/2010 | CONDITIONAL | VIN-decode, full suffix, interior code, colour, face grain, hinge and mounting points. |
| Nissan Micra K12 / K12E, RHD, 5-door hatchback | Build 08/2003 to 07/2010 | CONDITIONAL | VIN-decode, full suffix, interior code, colour, face grain, hinge and mounting points. |
| Nissan Micra C+C | Any year | NOT CONFIRMED | Do not buy without a VIN-decoded catalogue match to the exact suffix. |
| Nissan March K12 / imported Japanese-market vehicle | Any year | NOT CONFIRMED | Market-specific trim can differ. Exact VIN and part-number verification required. |
| Nissan Micra K11 or K13 | All years | DOES NOT FIT | Different generation, dashboard design and mounting system. |
| Left-hand-drive Micra K12 | All years | DOES NOT FIT | The photographed component is moulded and marked for RHD application. |
Catalogue variants within this pocket family
| Catalogue number | Catalogue period | Known trim-code notes |
|---|---|---|
| 68855-AX600 | 08/2003 to 09/2007 | Selected J and S interior variants. |
| 68855-AX602 | 08/2003 to 07/2010 | Selected G / K and black interior variants. |
| 68855-BC600 | 05/2005 to 09/2007 | Selected T interior variants. |
| 68855-BG00C | 09/2007 to 07/2010 | Selected H / P interior variants. |
These are catalogue comparison numbers, not automatic substitutes. The item photographs do not expose the final suffix, so no single number above has been assigned to this item without a VIN match.
Common Fault Symptoms
Broken hinge or pivot
The pocket hangs loose, drops open or does not move smoothly.
Latch will not hold
The door will not stay closed and may open while driving.
Cracked mounting tabs
The unit sits proud, moves in the dashboard or produces rattles.
Missing or damaged face
An exposed opening, poor appearance or unsecured small items in the cabin.
Replacing a damaged pocket restores the intended storage function, factory-style appearance and secure fit. A manufacturer-original used component is normally the best route to matching the existing dashboard texture, hinge travel and mounting geometry. Low-cost pattern copies can vary in grain, colour, latch feel and dimensional accuracy.
Why Choose a Recycled Manufacturer-Original Part?
Correct textureFactory mounting geometryProven vehicle-grade materialLower environmental impact
- Designed for the vehicle's original dashboard aperture and fixing arrangement.
- More likely to match the surrounding trim grain, colour and operating feel than a low-cost copy.
- A tested used part can cost substantially less than a new replacement - in some cases up to 70% less, depending on current new-part price and availability.
- Reusing serviceable parts reduces demand for new raw materials, manufacturing energy and disposal.
Fitting Guide
Suggested tools
- Plastic trim-removal lever
- Phillips screwdriver
- Small flat trim tool / pick
- Torch
- Low-tack protective tape
Estimated time
Approximately 15-30 minutes for an experienced fitter where surrounding trim and clips are intact.
Corrosion, previously damaged clips, non-standard repairs or restricted access can increase labour time.
- Park safely, remove the key and protect the surrounding dashboard trim.
- Open the existing pocket and identify any visible screws, retaining tabs or adjacent trim that prevents removal.
- Use a plastic trim tool to release clips evenly. Do not twist the dashboard aperture or force one corner.
- Compare the old and replacement parts side by side: full number, colour, grain, hinge, depth, tabs and every mounting point must match.
- Transfer any reusable clips only where the design requires it, then seat the replacement evenly.
- Refit fasteners and trim. Open and close the pocket repeatedly to confirm secure latching, free movement and no rattles.
This is general guidance, not a model-specific workshop-manual procedure. Stop if airbags, wiring or unfamiliar trim fixings are encountered. Professional fitting is recommended where you are uncertain.
Indicative Garage Labour Calculator
This listing uses a static labour table. Multiply the garage's hourly rate by the estimated 0.25-0.50 labour hour.
| Garage rate | 15 minutes / 0.25 hr | 30 minutes / 0.50 hr |
|---|---|---|
| £50 per hour | £12.50 | £25.00 |
| £75 per hour | £18.75 | £37.50 |
| £100 per hour | £25.00 | £50.00 |
| £125 per hour | £31.25 | £62.50 |
| £150 per hour | £37.50 | £75.00 |
Labour-only estimate. Minimum charges, diagnosis, replacement clips, local VAT treatment and additional work vary by garage. ThePartPilot fitting service may be available by prior arrangement, subject to technician capacity and vehicle inspection. Ask through eBay Messages before travelling.
Ordering Correctly - Prevent Wrong-Part Returns
1. Send the VIN
Provide the full 17-character VIN through eBay Messages for catalogue verification.
2. Send clear photos
Show the original part fitted, its complete moulded / printed number, face colour, rear tabs and connector area if present.
3. Compare the images
The actual item photographs take priority over generic item specifics. Check every fixing point and surface detail.
4. Check your address
We can dispatch only to the address on the completed eBay order. Check it before payment; it cannot be changed after checkout.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery, Collection and Fitting
UK dispatch
Carefully picked, checked against the listing photographs and securely packed for tracked delivery.
International delivery
Available through eBay's Global Shipping Programme to eligible destinations displayed at checkout. Destination availability, import taxes and charges are controlled by eBay and the buyer's location.
Collection
Collection can be arranged seven days a week up to 8pm, including bank holidays, strictly by confirmed prior appointment.
More than 25,000 parts in stock: ThePartPilot holds a broad range of recycled vehicle components on the shelf. For related parts, use eBay's seller shop or send a message with the VIN and the part required.
VAT and Returns Information
VAT margin scheme
Sold under the VAT Margin Scheme / Global Accounting Scheme where applicable. VAT is accounted for within the margin; it is not shown separately and is not reclaimable as input tax.
Returns and condition
Return the item in the same uninstalled condition, with all supplied parts and secure packaging. Where eBay permits, a deduction of up to 50% may be made only for proven loss in value caused by fitting, use, damage, missing parts or inadequate return packaging. This is not an automatic restocking charge and does not limit statutory rights or the eBay Money Back Guarantee.
A wrong fitment should be prevented before purchase by VIN and photograph verification. Do not modify, force-fit, paint or dismantle the component until compatibility is confirmed.