Nissan Pulsar Mk3 C13 2014-2018 5 Door Dashboard Glove Box Compartment
Nissan Pulsar Mk3 C13 Dashboard Glove Box Storage Compartment
ACTUAL ITEM PHOTOGRAPHS
ITEM DETAILS & SPECIFICATIONS
| Manufacturer | Nissan |
| Vehicle | Nissan Pulsar |
| Chassis / Generation | C13 / C13M European model |
| Exact vehicle years | 2014, 2015, 2016, 2017, 2018 |
| Body style | 5-door hatchback |
| Steering configuration | UK / RHD application – compare original before purchase |
| Part type | Complete dashboard glove box / glove compartment assembly |
| Placement | Passenger side of dashboard |
| Colour marking | Dark grey / graphite textured finish – compare photographs |
| Primary material | Moulded automotive-grade interior plastic with integrated latch and hinge structure |
| eBay Item Number | 147412110528 |
| Warranty | 30 days |
| Interchange Part Number | Catalogue comparison reference: 68500-3ZP0A. This number is associated with C13 glove-box assemblies but is not visibly readable on this individual item, therefore match your original before ordering. |
| Superseded / alternative numbers | C13 glove-box references found in catalogue/market data include 68500-3ZP5A and 68520-3ZP0A. These should be treated as comparison references only unless the number on your original component matches. |
| VAT | Sold under the applicable Global Accounting / second-hand margin scheme. VAT is not separately itemised and no reclaimable VAT invoice is available. |
CORRECT VEHICLE REFERENCE — NISSAN PULSAR C13 5 DOOR
Reference photographs are provided to help identify the correct generation and body style. They are not photographs of the donor vehicle.
VEHICLE COMPATIBILITY CHART
| Vehicle | Years | Body | Engine / Notes | Status |
|---|---|---|---|---|
| Nissan Pulsar C13 | 2014 | 5-door hatch | 1.2 DIG-T / 1.5 dCi – match glove-box assembly | ✓ FITS C13 APPLICATION |
| Nissan Pulsar C13 | 2015 | 5-door hatch | 1.2 DIG-T / 1.5 dCi / 1.6 DIG-T – compare trim and colour | ✓ FITS C13 APPLICATION |
| Nissan Pulsar C13 | 2016 | 5-door hatch | Petrol / diesel – compare original component | ✓ FITS C13 APPLICATION |
| Nissan Pulsar C13 | 2017 | 5-door hatch | Petrol / diesel – compare original component | ✓ FITS C13 APPLICATION |
| Nissan Pulsar C13 | 2018 | 5-door hatch | Petrol / diesel – compare original component | ✓ FITS C13 APPLICATION |
DOES NOT FIT / DO NOT ORDER FOR
- Older Nissan Pulsar N13, N14, N15 or N16 generations.
- Nissan Pulsar B17 saloon / non-European sedan models.
- Nissan Qashqai, Juke, Micra, Note or X-Trail simply because the dashboard appears similar.
- Left-hand-drive applications unless your original component and mounting arrangement are confirmed identical.
- Any vehicle outside the C13 2014-2018 application based only on the word “Pulsar”.
- Any vehicle where the colour, latch, hinge geometry or mounting tabs differ from the photographs.
WHERE THIS PART FITS & WHAT IT DOES
The glove-box assembly mounts into the passenger side of the dashboard. It provides the enclosed dashboard storage compartment and incorporates the opening lid, latch interface, hinges and surrounding moulded structure.
On the Pulsar C13 the area behind the glove compartment also provides access to other dashboard/HVAC components, including the cabin-filter area. Correct alignment is therefore important so that the glove-box lid closes squarely and does not foul surrounding dashboard trim.
COMMON REASONS FOR REPLACEMENT
- Glove-box lid will no longer remain securely closed.
- Broken latch or damaged latch aperture.
- Cracked hinge points or distorted plastic mounting tabs.
- Lid sits unevenly or drops when opened.
- Dashboard rattling caused by damaged glove-box mountings.
- Heavy scratches, impact damage or cosmetic deterioration.
- Damage caused during previous dashboard or cabin-filter work.
WHY CHOOSE AN ORIGINAL MANUFACTURER PART?
A factory-manufactured dashboard component was designed around the vehicle's original mounting locations, latch geometry, dashboard profile and interior texture. This normally provides a more predictable physical match than a low-cost universal or reproduction component.
Re-using a quality original manufacturer component also avoids replacing a complete assembly with a cheaply moulded copy simply because one small section has failed.
Buying a quality recycled part can also represent a substantial saving compared with purchasing the equivalent new dealer-supplied component, with savings potentially reaching around 70% on some parts depending on the component and current new-part price.
FITTING GUIDE
Recommended tools
- Plastic interior trim-removal tool.
- Phillips / cross-head screwdriver.
- Small socket set where required.
- Short extension and ratchet.
- Inspection lamp.
- Protective cloth or trim mat.
General fitting procedure
- Park the vehicle securely, switch the ignition off and remove the key.
- Open the passenger door and protect adjacent dashboard and sill trim.
- Open the glove compartment and remove any contents.
- Carefully release surrounding trim panels using a plastic trim tool where necessary.
- Remove the glove-box retaining screws / fasteners.
- Support the assembly as the final fasteners are removed.
- Disconnect any fitted glove-box lamp or related connector before fully withdrawing the assembly.
- Compare replacement and original mounting tabs, latch and hinge locations side by side.
- Install the replacement assembly without forcing any plastic tabs.
- Reconnect any electrical connection removed during dismantling.
- Refit fasteners evenly and avoid overtightening into plastic mounts.
- Check the lid opens, closes and latches correctly before reinstalling all surrounding trim.
ESTIMATED GARAGE LABOUR COST
eBay does not permit the JavaScript required for an interactive calculator, so the table below gives a quick static estimate using an approximate 0.5 hour labour allowance.
| Garage hourly rate | Approx. 0.5 hr labour |
|---|---|
| £50 / hour | £25 |
| £60 / hour | £30 |
| £70 / hour | £35 |
| £80 / hour | £40 |
| £100 / hour | £50 |
| £120 / hour | £60 |
Labour prices are estimates only. Local garage rates and the condition of the vehicle can change the final fitting cost.
🔧 FITTING SERVICE AVAILABLE
ThePartPilot can provide fitting and vehicle repair services for selected parts subject to workshop availability, vehicle condition and prior arrangement through eBay.
25,000+ PARTS ON THE SHELF
ThePartPilot stocks more than 25,000 vehicle parts at any one time, helping us supply everything from interior trim and switches to body, electrical, suspension and mechanical components.
BUY THE CORRECT PART FIRST TIME
Before purchasing, check all of the following:
- Your vehicle is a Nissan Pulsar C13.
- Your registration / production year falls within 2014-2018.
- Your vehicle is the European 5-door hatchback.
- Your steering configuration and passenger-side dashboard match the pictured unit.
- The colour and grain of your original glove-box lid match.
- The latch position matches.
- The hinge and mounting locations match.
- Any number printed or moulded on your original is compared with available cross-reference numbers.
Do not order purely because the vehicle make and model name are the same. Part revisions can occur during a production run.
RETURNS & PART CONDITION
This is a recycled vehicle component and may display normal cosmetic evidence of previous installation. Please inspect all photographs before ordering.
Returned parts must be returned complete and in the same condition in which they were supplied. Where an item is returned installed, altered, damaged, incomplete or otherwise in a condition that causes an actual loss of value, an appropriate deduction may be made in accordance with eBay's return-condition rules.
Selecting the correct fitment before installation helps avoid unnecessary return postage, workshop time and vehicle downtime.
🌍 INTERNATIONAL SHIPPING — EBAY GLOBAL SHIPPING PROGRAMME
Eligible orders can be sent internationally through eBay's Global Shipping Programme. Availability is determined by eBay, the delivery address, parcel size, item category and current programme restrictions.
Current eligible destinations include EU markets such as Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden, together with supported non-EU markets including Australia, Canada, USA, Japan, New Zealand, Norway, Switzerland, UAE, Saudi Arabia, Hong Kong, Singapore, South Korea and many additional destinations. The exact availability shown at checkout is definitive.
📦 IMPORTANT CHECKOUT ADDRESS NOTICE
Please ensure your delivery address is completely correct before completing checkout. Orders must be dispatched to the address supplied through the eBay transaction and we cannot manually substitute another delivery address after the order has been placed.
🚗 WE ALSO BUY CARS FOR CASH
ThePartPilot also purchases vehicles for recycling, with nationwide collection and same-day payment available subject to vehicle, location, documentation and collection arrangements. Please use the appropriate eBay contact route where permitted.
SUPPORT A LOCAL SMALL BUSINESS & HELP REUSE QUALITY PARTS
Every recycled component that can be safely reused keeps a serviceable vehicle part in circulation for longer. Choosing a good recycled component can reduce demand for replacement manufacturing, packaging and material use while helping an independent UK automotive business continue supplying affordable parts to drivers and repairers.
Thank you for supporting ThePartPilot.
📦 CAREFULLY PREPARED FOR DISPATCH
Parts are selected from stock, checked against the order and packaged appropriately for onward delivery.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.