Peugeot 308 1.2 PureTech Engine Breather Hose Pipe HSR22853

Peugeot 308 1.2 PureTech Engine Breather Hose Pipe HSR22853

£22.11
Skip to product information
Peugeot 308 1.2 PureTech Engine Breather Hose Pipe HSR22853

Peugeot 308 1.2 PureTech Engine Breather Hose Pipe HSR22853

£22.11
THEPARTPILOT
USED ORIGINAL MANUFACTURER-SPEC VEHICLE PARTS
25,000+ PARTS IN STOCK
⚠️ IMPORTANT FITMENT CHECK
DO NOT BUY THIS PART USING MODEL YEAR ALONE. The hose carries the visible/reference code HSR22853. This code occurs across more than one Stellantis 1.2 petrol application and therefore must be checked against the vehicle VIN, the OE catalogue number and the shape/connectors of the original hose.
If you are unsure, message us through eBay before ordering with your VIN and a clear photograph of the hose currently fitted.
Peugeot 308 1.2 PureTech
Engine Breather / Ventilation Hose Pipe
Reference Code: HSR22853
📸 ACTUAL PART PHOTOGRAPHS
ThePartPilot HSR22853 Peugeot hose pipe actual part
THEPARTPILOT
HSR22853 hose connector and identification reference
THEPARTPILOT
ThePartPilot Peugeot HSR22853 used hose pipe
THEPARTPILOT
HSR22853 identification label photograph
THEPARTPILOT
Please compare the complete pipe shape, bends, mounting points, connector design and identification markings with your existing part.
🔍 PART INFORMATION
Part Type Engine breather / ventilation hose family
Visible / Reference Code HSR22853
Known Cross-Reference Evidence 9812135680 and 9804264280 appear alongside HSR22853 on separate Stellantis applications. VIN confirmation is required before treating either number as the OE number for this exact item.
Material Moulded plastic / rubber-type hose construction with protective sleeving and quick-connect fittings, as photographed.
Location Engine compartment on compatible applications.
Condition Used. Please study all actual-item photographs for cosmetic condition and connector condition before purchase.
⚙️ WHERE IT FITS & WHAT IT DOES

On applications using the corresponding crankcase-ventilation configuration, this style of pipe forms part of the engine breather / crankcase ventilation circuit. The system carries crankcase vapours back toward the engine intake system while helping control crankcase pressure.

Exact routing and connection points are VIN and engine-code dependent. The original pipe must therefore be compared before ordering.

🚗 FITMENT & CROSS-REFERENCE CHART
The table below records applications in which the HSR22853 / associated-number family has been found. It is NOT permission to fit the part solely because the model and year appear below.
Vehicle Engine Evidence Year Evidence Reference Status
Peugeot 308 II / 308 SW 1.2 petrol / PureTech family HSR22853 documented on 2015/2016 donor examples; 9812135680 documented on a 2020 1.2 308 SW HSR22853 / 9812135680 family VIN + OE match required
Peugeot 2008 II 1.2 petrol family Second-generation application evidence HSR22853 + 9812135680 VIN + OE match required
Citroën / DS 3 Crossback 1.2 petrol HNS / HN05 evidence 2021/2022 donor evidence 9812135680 / HSR22853 VIN + OE match required
Later Stellantis 1.2 applications 1.2 Turbo family Later-model evidence exists HSR22853 has also been paired with 9804264280 DO NOT assume interchangeability
Peugeot 308 / 308 SW 2.0 GT BlueHDi DW10FC diesel Current listing states 2017–2021 Existing eBay compatibility only NOT VERIFIED — DO NOT RELY ON THIS FITMENT
✅ BUY WHEN
Your VIN/OE catalogue identifies the same hose, the connector layout matches, the moulded pipe routing matches and the identification markings correspond with the item photographs.
❌ DO NOT BUY WHEN
Your vehicle has a different engine, different hose routing, different connector arrangement, a different OE catalogue number, or you are relying only on registration year / eBay's automatic compatibility table.
📷 5-POINT PHOTO MATCH
  1. Match the HSR22853 marking/reference where present.
  2. Match the yellow connector and locking arrangement.
  3. Match every moulded bend in the pipe.
  4. Match the mounting / locating tab position.
  5. Match overall routing and both connection ends.
A visual match does not replace the VIN/OE check — use both.
🩺 POSSIBLE FAULT SYMPTOMS

A split, leaking, damaged or poorly sealed crankcase-ventilation hose can contribute to symptoms such as an air leak or hissing noise, unstable/rough idle, oil vapour or oil residue around a connection, increased oil consumption, or an engine-management warning caused by an air/mixture issue.

These symptoms can have many other causes. Diagnose the vehicle before replacing components rather than replacing this hose on symptoms alone.

🏆 WHY CHOOSE AN ORIGINAL MANUFACTURER-SPEC USED PART?

Correct moulded routing, connector geometry, retaining points and material specification matter on engine hoses. A poorly matched copy can introduce incorrect routing, connector sealing problems, vibration contact or premature deterioration.

Choosing a good used original-spec component also gives buyers an opportunity to obtain the same style of component fitted by the vehicle manufacturer while spending substantially less than buying a new replacement in many cases.

Always compare the current new-part price when calculating your saving.

🔧 GENERAL FITTING GUIDE
VIN-specific workshop instructions take priority. The exact procedure cannot be finalised until the engine and OE application are confirmed.
  1. Allow the engine to cool fully and switch the ignition off.
  2. Photograph the original hose routing before removal.
  3. Confirm the replacement hose number, connector and shape.
  4. Remove an engine cover or intake duct only where required for access.
  5. Release the original quick-connect locking mechanism carefully.
  6. Do not force brittle plastic connectors or retaining tabs.
  7. Remove the old hose and inspect mating surfaces / seals.
  8. Route the replacement exactly as the original with no twisting or kinking.
  9. Secure all retaining clips and perform a gentle pull-check.
  10. Start the engine and check the installation for air/oil leakage and abnormal running.
🧰 TYPICAL TOOLS
Protective gloves • eye protection • inspection torch • trim tool / suitable small pick • suitable screwdriver where required • small socket set if surrounding covers must be removed.
Tool requirements can differ according to VIN and engine layout.
💷 GARAGE LABOUR COST ESTIMATOR

JavaScript is not used in this listing. Use the static table below: Garage labour charge = labour time × hourly rate.

Garage Rate 0.5 Hour 0.75 Hour 1.0 Hour
£60/hr £30 £45 £60
£80/hr £40 £60 £80
£100/hr £50 £75 £100
£120/hr £60 £90 £120
£150/hr £75 £112.50 £150

These figures are budgeting examples only and are not a repair quote. Exact repair time must be based on the VIN-specific workshop procedure and access requirements.

🛠️ FITTING SERVICE MAY BE AVAILABLE
Subject to workshop availability and vehicle/part verification. Please contact us using eBay Messages for availability.
🌍 UK & INTERNATIONAL DELIVERY

International delivery is available to eligible destinations displayed by eBay at checkout through the applicable eBay international-delivery programme.

Destination eligibility, import charges, international postage and any exclusions are calculated/displayed by eBay at checkout. Please rely on the delivery options shown on this listing rather than a static country list.

📍 CHECK YOUR DELIVERY ADDRESS BEFORE PAYMENT
Please ensure the delivery address selected during eBay checkout is complete and correct. Orders are dispatched using the address supplied through the eBay transaction and we cannot manually change the checkout address for you after purchase.

How to find us / WhatsApp

QR code to WhatsApp contact number 07495972152


Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

↩️ HELP US PREVENT INCORRECT-PART RETURNS

We provide detailed photographs and fitment guidance so that the correct component can be identified before purchase. If you are unsure, request a fitment check through eBay Messages before ordering.

Returns are handled in accordance with the return policy shown on the eBay listing and applicable eBay rules.

Where eBay permits a deduction because an item has been returned used, damaged, incomplete or otherwise in a different condition from that dispatched, any applicable deduction will be handled in accordance with eBay's return rules and the actual loss in value.

VAT INFORMATION: Where eligible, goods are accounted for under the applicable Global Accounting / VAT margin-scheme rules. VAT is not itemised separately on a margin-scheme sale/invoice.
📦 25,000+ PARTS ON THE SHELF

Our stock operation handles thousands of used automotive components. Parts are selected, checked against the listing, packed for transport and dispatched for customers throughout the UK and internationally.

🔎 Pick  •  ✅ Check  •  📦 Pack  •  🚚 Dispatch
♻️ SUPPORTING REUSE & A LOCAL SMALL BUSINESS

Buying a serviceable used automotive component keeps an existing part in productive use for longer and can reduce demand for an unnecessary newly manufactured replacement.

Every order also supports an independent automotive-parts business maintaining a large physical stock holding and helping customers keep existing vehicles on the road.

🚗 + ♻️ + 🔧 = MORE USE FROM EXISTING PARTS
THEPARTPILOT
PART NUMBER • PHOTO • VIN
Check all three before ordering for the best possible fitment accuracy.

You may also like