FRONT PASSENGER DOOR WINDOW CONTROL SWITCH

This listing is for a front passenger-side individual window switch for the first-generation Porsche Cayenne 955 / 9PA family.

Do not order using registration number, model name or year alone. Porsche used different electrical switches and revisions.

PRODUCT DETAILS

🔎 PART NUMBER CROSS-REFERENCE

The Porsche Cayenne individual window-switch family is associated in parts references with:

IMPORTANT: These numbers are provided as useful cross-reference information for this switch family. The exact number fitted to your vehicle must be compared with the number visible on the component being purchased. A similar-looking switch is not automatically interchangeable.

VEHICLE COMPATIBILITY GUIDE

The cross-referenced switch family is used on first-generation Cayenne applications. Because Porsche electrical equipment can vary by production date and specification, the table below is a vehicle-family guide, not a substitute for matching the actual part number and connector.

❌ DO NOT ASSUME THIS FITS

This listing should NOT be assumed suitable for:

• Porsche Cayenne 92A / second-generation vehicles
• Porsche Cayenne 9Y0 / third-generation vehicles
• Driver/master window-control panels
• Any switch with a different electrical connector
• Any switch with different locating tabs or casing
• Any vehicle simply because the registration checker suggests compatibility
• Any vehicle where the original component number does not cross-reference

Visual similarity alone is not sufficient. Check the connector and component number before ordering.

📍 WHERE IS THIS PART FITTED?

This switch assembly is installed in the front passenger door interior trim / door-handle switch area of the applicable Porsche Cayenne.

It provides the passenger with local electrical control of the window. Depending on the exact switch specification, associated door-control functionality may also be incorporated into the surrounding switch/trim assembly.

⚡ COMMON SYMPTOMS OF A FAILED WINDOW SWITCH

• Passenger window will not lower from the passenger-door switch
• Passenger window will not raise from the passenger-door switch
• Window operates intermittently
• Switch only works when pressed in a particular position
• Loose, worn or physically damaged rocker/button
• Window works from another control position but not from this door
• Internal electrical contacts become worn or contaminated
• Switch illumination may fail depending on the underlying fault

A non-operating window is not automatically caused by the switch. Wiring, door-control modules, fuses, regulators, motors and connectors should also be diagnosed where appropriate.

WHY CHOOSE AN ORIGINAL-MANUFACTURER USED PART?

Your Cayenne was engineered around components manufactured to a specific electrical, mechanical and dimensional specification. A correctly matched used original-manufacturer switch retains the factory-style connector, mounting arrangement, switch feel and electrical architecture intended for the vehicle.

Cheap pattern replacements can vary in switch feel, plastics, illumination, connector quality and internal contact construction. For an older premium vehicle, a good used original component can therefore be an excellent alternative to an inexpensive copy.

♻️ Buying quality used components can also offer substantial savings compared with purchasing equivalent parts new — in some applications, savings can reach up to approximately 70%.

USED PART CONDITION

This is a used automotive component. Cosmetic marks, light scratches, surface wear or signs of previous installation should therefore be expected.

Please study all photographs of the actual item. The photographs form an important part of the description and should be used to verify switch layout, connector configuration, mounting points and cosmetic condition before ordering.

🔧 GENERAL FITTING GUIDE

1. Switch off the ignition and remove the key.
2. Allow vehicle electrical systems to shut down.
3. Protect the surrounding leather/plastic door trim.
4. Carefully release the switch surround using a suitable non-marring trim tool.
5. Do not lever aggressively against visible trim surfaces.
6. Lift the switch assembly sufficiently to access its electrical connector.
7. Release the connector locking mechanism rather than pulling on the wiring.
8. Compare the removed switch and replacement side-by-side.
9. Verify connector, locating tabs and component numbers.
10. Connect the replacement switch securely.
11. Test operation before fully refitting the trim.
12. Refit the switch/surround and ensure all clips are correctly engaged.
13. Check window up/down operation after installation.

🧰 TYPICAL TOOLS REQUIRED

⏱️ ESTIMATED INSTALLATION TIME & GARAGE LABOUR

For a straightforward switch replacement where extensive door-card removal is not required, allow approximately 0.25–0.50 labour hours. Additional diagnosis or trim removal can increase this.

Because eBay descriptions cannot use JavaScript, the table below provides an instant labour-cost guide without active content:

Estimates only. Actual labour charges vary by workshop, location, diagnostic requirements and vehicle condition.

ThePartPilot can also offer fitting and automotive repair services subject to workshop availability and prior arrangement.

Please contact us through eBay Messages before travelling or purchasing fitting services.

We stock thousands of quality used automotive components covering numerous manufacturers and vehicle systems.

Need another part for the same vehicle? Contact ThePartPilot through eBay Messages with your VIN and the component required.

How to find us / WhatsApp

Scan the QR code to open a WhatsApp chat for collections and enquiries.

If the QR image needs refreshing, generate it again from the same WhatsApp link.

🌍 INTERNATIONAL DELIVERY

International delivery is available through eBay's international shipping programme where offered by eBay at checkout.

Destination availability, shipping cost, import charges, customs processing and delivery times are determined by eBay and the buyer's delivery address at checkout.

Where this item is sold under the applicable VAT margin accounting arrangements for used goods, VAT is not separately itemised or reclaimable on the selling price.

↩️ RETURNS & CORRECT FITMENT

Our objective is to help you order the correct component first time. Please therefore check the photographs, component number, electrical connector and vehicle details before purchasing.

If you are unsure, ask us to verify fitment before ordering. VIN/chassis information plus a clear photograph of your existing component and its number provides the strongest basis for checking.

Returns are handled in accordance with the return policy shown on the eBay listing and applicable eBay rules. Where eBay permits a deduction because an item is returned used, altered, damaged, incomplete or otherwise in a condition that has reduced its value, an appropriate deduction may be made in accordance with eBay's rules.

ThePartPilot purchases cars for stock and automotive recycling. Nationwide collection and prompt payment may be available subject to vehicle details, location, valuation and prior agreement.

Please use the appropriate eBay communication channel where applicable.

SUPPORT SMALL BUSINESS • REUSE • RECYCLE

Every serviceable automotive component that is professionally reused can help extend the useful life of an existing vehicle while reducing demand for replacement manufacturing and preventing usable components from being unnecessarily discarded.

By purchasing quality used automotive parts you are supporting a UK automotive small business while participating in the circular economy.

📦 PROFESSIONAL DISPATCH

Components are picked from our stock, checked against the order and packaged appropriately for dispatch.

Tracking and delivery information is supplied through eBay where available.