Proton Savvy 1.2 D4F Air Box Filter Housing 2005-2012 H8200341099 8200517765
£23.29
Skip to product information
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
Proton Savvy 1.2 D4F Air Box Filter Housing 2005-2012 H8200341099 8200517765
£23.29
THEPARTPILOT THEPARTPILOT
THEPARTPILOT
PROTON SAVVY 1.2 D4F AIR BOX / AIR FILTER HOUSING
Used factory-fit housing for the 5-door Proton Savvy 1.2 16V petrol, with moulded references H8200341099 and 8200517765. Supplied exactly as shown in the listing photographs.
2005-2012 FITMENT
1.2 16V PETROL
D4F 722 ENGINE
30-DAY WARRANTY
Exact Part Identification
Before ordering, compare the complete housing shape, mounting feet, hose connections, inlet and outlet positions and both moulded references with your old part. Vehicle registration alone is not always sufficient for an intake component.
| Part type | Complete air-filter box / air-cleaner housing assembly as pictured |
|---|---|
| Main moulded reference | H8200341099 |
| Additional moulded reference | 8200517765 |
| Vehicle application | Proton Savvy 5-door hatchback |
| Engine | 1.2-litre 16-valve petrol, 1149cc, 55kW / 75PS, D4F 722 |
| Transmission | Manual or automated manual only when the old housing and every connection match |
| Colour and material | Black moulded automotive plastic |
| Condition | Used. Expect age-related marks, dust and cosmetic wear. Inspect every actual-item photograph. |
| Included | Only the housing, hoses, clips and fittings visible in the actual listing photographs. The disposable filter element is not promised unless clearly pictured and stated. |
Important number warning: 8200517765 is also used in some replacement-filter catalogues. Do not order from that number alone. H8200341099, the complete housing profile, mounting points and hose layout must also match.
Actual Item Photographs
Actual used air-box assembly offered in this listing.
Actual reference-marking photograph. Match both numbers and the complete physical shape.
Correct Vehicle and Fitting Location
Correct reference vehicle: Proton Savvy 5-door hatchback. Image: Two hundred percent, CC BY-SA.
Second exact-body reference: Proton Savvy 5-door hatchback. Image: Two hundred percent, CC BY-SA 3.0.
Where it is fitted: under the bonnet in the engine bay, connected to the engine intake ducting. It contains the air-filter element, supports and seals the intake route, reduces induction noise and directs filtered air towards the throttle body. It is a passive housing and does not electronically control the vehicle.
FRONT AIR INLET
→
AIR BOX & FILTER
THIS PART
THIS PART
→
INTAKE HOSE
→
THROTTLE BODY / ENGINE
This is a simplified static intake-path guide rather than a workshop diagram. Use the actual-item photographs and your existing housing for physical comparison.
Confirmed Fitment Chart
Confirmed application: Proton Savvy 1.2 16V petrol, 5-door hatchback, D4F 722 engine, model years 2005 through 2012 inclusive.
| Make | Model | Years | Body | Engine | Status |
|---|---|---|---|---|---|
| Proton | Savvy | 2005-2012 | 5-door hatchback | 1.2 16V petrol, 1149cc, D4F 722, 55kW / 75PS | Confirmed application |
Part-number cross-reference leads — not guaranteed fitment
| Vehicle family | Typical engine family | How to use this information |
|---|---|---|
| Renault Clio III / selected Clio IV | Selected 1.2 16V D4F variants | Reference only. Match H8200341099, all ports, mounting feet and the complete housing outline. Verify by VIN before purchase. |
| Renault Modus / Grand Modus | Selected 1.2 16V D4F variants | Reference only. Different revisions, mounting points and pipe layouts exist. |
| Renault Twingo II | Selected 1.2 16V D4F variants | Reference only. Do not order by engine capacity alone. |
| Dacia Sandero I / selected Sandero II | Selected 1.2 16V D4F variants | Reference only. VIN, engine code, part number and photograph comparison are required. |
Renault and Dacia applications are included only as part-number research leads. They are not guaranteed eBay compatibility because engine code, production date, market, hose and mounting variations can change the assembly.
This part will not fit:
- Diesel, turbocharged, 1.3-litre, 1.4-litre or 1.6-litre applications.
- Vehicles with a different outlet, snorkel, mounting feet, breather pipe or hose arrangement.
- A different housing revision carrying non-matching moulded references.
- Renault or Dacia vehicles unless the complete assembly is independently verified.
- Buyers requiring only the disposable air-filter element; this listing is for the housing assembly.
How to Confirm Fitment Before Buying
- Open the bonnet and photograph your existing air-box assembly from above and from the hose side.
- Locate the moulded reference and confirm H8200341099.
- Use 8200517765 only as an additional reference rather than the sole fitment check.
- Compare every mounting foot, clip, hose outlet, intake snorkel and breather connection.
- Confirm the vehicle is a Proton Savvy 1.2 16V petrol with engine code D4F 722.
- When uncertain, send the registration, VIN, engine code and clear photographs through eBay Messages before ordering.
Why Replacement May Be Necessary
Possible fault symptoms
- Cracked housing, broken clips or damaged mounting points.
- A loose air box causing vibration, rattling or excessive induction noise.
- A poor seal allowing dirt or moisture to bypass the filter.
- A split hose connection or disturbed intake airflow.
- Erratic running, reduced performance or a warning light where an intake leak affects engine management.
Benefits of a factory-fit used component
- Correct moulded shape and original mounting geometry when the reference matches.
- Factory hose routing, resonator volume and clip positions.
- Normally a better physical match than a low-cost universal or pattern-copy housing.
- Reusing a serviceable component reduces waste and can cost substantially less than buying new.
- Some used parts can save buyers as much as 70% compared with new retail pricing, although the actual saving depends on the individual component and availability.
Fitting Guide
This installation information is a general guide. Work only with the ignition switched off and the engine cool. A competent technician should inspect the intake system and confirm every seal and hose is secure before the engine is started.
Suggested tools
- Ratchet, extension and common 8mm / 10mm sockets.
- Flat-blade screwdriver or suitable hose-clamp driver.
- Hose-clamp pliers and a non-marring trim tool.
- Inspection lamp, protective gloves and a clean cloth.
General installation sequence
- Switch off the ignition, remove the key and allow the engine to cool.
- Photograph the original hose routing and clip positions before removal.
- Release the inlet duct, outlet hose and any breather connection without forcing aged plastic.
- Undo the housing fasteners or release its rubber mounting points, then lift the assembly clear.
- Inspect the replacement housing for transport damage and clean all sealing surfaces.
- Transfer only serviceable filters, seals, clips or rubber mounts that are not supplied.
- Install the housing without trapping any hoses.
- Reconnect every pipe and tighten the clamps without crushing the plastic necks.
- Start the engine, listen for air leaks or rattles and recheck every connection.
Estimated repair time: approximately 0.5 to 1.0 labour hour for a competent technician. Corroded fixings, brittle hoses, damaged rubber mounts or previous modifications can increase the time. Coding is not normally required for the housing itself.
Static Garage Labour Cost Calculator
No JavaScript is used. Multiply the garage hourly rate by the actual time charged. The following table gives example labour-only costs for the estimated 0.5-to-1.0-hour fitting period.
| Garage rate | 0.5 hour | 0.75 hour | 1.0 hour |
|---|---|---|---|
| £50 per hour | £25.00 | £37.50 | £50.00 |
| £75 per hour | £37.50 | £56.25 | £75.00 |
| £100 per hour | £50.00 | £75.00 | £100.00 |
| £125 per hour | £62.50 | £93.75 | £125.00 |
Figures are estimates only and exclude parts, diagnostics, consumables, taxes charged by the garage and additional repairs discovered during installation. A fitting service may be available subject to workshop capacity; arrange through eBay Messages.
THEPARTPILOT Buyer Benefits
25,000+ PARTS IN STOCK
99.6% POSITIVE FEEDBACK
25+ YEARS' EXPERIENCE
TRACKED DISPATCH
FITMENT HELP VIA EBAY
- Warranty: this listing includes a 30-day seller warranty.
- Dispatch: orders are carefully packed and sent only to the checkout address recorded on the eBay order.
- Address warning: buyers must check their complete delivery address before payment. It cannot be changed after checkout; an incorrect order may need to be cancelled and placed again.
- International delivery: available through eBay’s Global Shipping Programme where offered. Eligible destinations, charges, import costs and restrictions are calculated by eBay at checkout and vary according to the item and destination.
- Collection: may be available by appointment following an eBay purchase. Arrange through eBay Messages.
- VAT: sold under the Global Accounting VAT margin scheme where applicable. VAT is not shown separately and is not reclaimable.
Returns and Fitment Responsibility
Please use the fitment chart, reference numbers and photographs before installation. Returns are handled through eBay and do not remove a buyer’s statutory rights. Parts returned fitted, altered, damaged, incomplete or materially reduced in value may be subject to an appropriate deduction only where eBay policy and applicable law permit. No deduction limits a buyer’s rights where an item is faulty, damaged in transit or not as described.
- Keep all packaging until the part has been inspected and fitment confirmed.
- Do not cut, drill, glue, paint or modify the part before confirming it is correct.
- Do not force a mismatched hose, clip or mounting point.
- Return the exact item supplied with every included component.
- Contact us through the eBay return request or eBay Messages if there is a problem.
Stock, Workshop and Dispatch
Illustrative automotive-parts storage image. THEPARTPILOT carries more than 25,000 parts in stock. Image: ATD-Sportscars, CC BY-SA.
Illustrative workshop image. Repair and fitting services are subject to availability. Image: Yvo Fox, CC BY-SA.
Illustrative dispatch image. Parts are packed to protect vulnerable plastic necks, clips and mounting points. Image: Paul Downey, CC BY.
Thank You for Supporting a Local Small Business
♻️ Choosing a quality used component keeps a serviceable part in circulation, reduces demand for newly manufactured materials and helps lower automotive waste. Your purchase supports a small independent UK parts business, local employment and the continued recycling of vehicles and components.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
THEPARTPILOT — BUY THE CORRECT PART FIRST TIME
Manufacturer and model names are used solely to identify compatibility. Reference and illustrative photographs are clearly labelled. THEPARTPILOT branding and watermarking are used for listing-content protection.