RANGE ROVER L405 2013-17 FRONT RIGHT OSF COMPLETE DOOR FREE POST
£293.88
Skip to product information
For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.
RANGE ROVER L405 2013-17 FRONT RIGHT OSF COMPLETE DOOR FREE POST
£293.88
THEPARTPILOT
eBay item 147412107025
Premium original-manufacturer donor component
Range Rover L405 2013–2017 Front Right / OSF Driver Door Assembly
Full-size 5-door Range Rover L405 • UK right-hand-drive driver side • window glass and door mirror are not fitted • sale contents are exactly as photographed.
CRITICAL BEFORE ORDERING: this is a front right / offside front door. On a UK right-hand-drive vehicle it is the driver door. The photographed interior trim is the 2013–2017 pre-facelift style. The bare shell is catalogued more widely, but the complete trim, wiring, switches, lock, speaker and control equipment must match your vehicle.
Actual Item Reference Photos
These images are served from the existing eBay image host and show the actual assembly offered. Please inspect every image at full size; visible condition and included components take priority over generic item specifics.
THEPARTPILOT
Actual item – reference photo 1. Check the outer shell, colour appearance, handle, trim and all visible marks.
THEPARTPILOT
Interior full view – compare the light/dark door card, wood-style trim, speakers, handle and control layout.
THEPARTPILOT
Close-up – 1/2/3 memory controls, interior handle, wood-style trim, Meridian-labelled grille and visible soiling/wear.
THEPARTPILOT
Driver-control close-up – four-window/mirror switch pack, speaker layout and a loose small wired speaker/tweeter are visible.
THEPARTPILOT
Exterior handle close-up – inspect the visible cosmetic mark/scuff and surrounding paint condition.
THEPARTPILOT
Handwritten dismantler stock marking – this is not evidence of a Land Rover manufacturer part number.
Where This Part Fits on the Vehicle
Vehicle body: full-size Range Rover L405, 5-door SUV. The highlighted area is the front right door when viewed from the rear/driver-side orientation. “Right” always means the right side when seated inside the vehicle facing forward.
HIGHLIGHTED POSITION = FRONT RIGHT / OSF / UK DRIVER SIDE
This ThePartPilot location diagram identifies the correct 5-door body position and helps avoid confusion with Range Rover Sport, Evoque, earlier or later generations.
Item Details & Evidence-Led Specifics
Vehicle makeLand Rover
Vehicle modelRange Rover full-size L405
Exact complete-assembly era2013, 2014, 2015, 2016 and 2017
Body style5-door SUV; not Range Rover Sport
PlacementFront right / offside front / OSF
UK driving positionDriver side on right-hand-drive vehicles
Part typeAssembled door as photographed; not factory-complete
ConstructionAluminium-body vehicle architecture; use aluminium-aware repair methods
Exterior colour markingLight metallic bronze/silver appearance in photos; exact paint code not verified
Interior appearanceLight upper trim, dark lower trim and wood-style insert; exact trim code not verified
Condition wordingPreviously fitted donor assembly with visible cosmetic wear, marks and storage/workshop dust
eBay item number147412107025
Seller warranty30 days, subject to the listing terms
UK postageFree postage is currently shown in the listing; checkout terms apply
VAT informationGlobal Accounting VAT Margin Scheme — VAT is not separately itemised and no reclaimable VAT invoice is available
Fitting serviceAvailable subject to workshop capacity; enquire through eBay Messages before purchase
Part Numbers, Cross-References & Evidence
| Field | Result | How to use it |
|---|---|---|
| Part number found or shown on this item | No legible manufacturer number confirmed from the supplied photographs | Do not match by a handwritten yard or stock marking. |
| Bare shell catalogue cross-reference | LR036399 — right/front-right door shell, less hinges | This supports shell/body interchange only. It does not prove that the photographed trim, harness, lock, switch pack or modules match every LR036399 application. |
| Direct replacement number | No separate direct replacement number confirmed | Match the physical shell, equipment and vehicle VIN before ordering. |
| Verified interchange number | No additional interchange number confirmed | Avoid adding speculative numbers to the title or item specifics. |
| Superseded part number | No confirmed superseded number verified | Do not assume an unverified supersession. |
| Evidence used | Actual listing photographs; L405 right-front shell catalogue data; 2013–2017 right-front trim catalogue data; 2018 model redesign evidence | Photographs are the primary item evidence. Catalogue data is used to define the limits of compatibility. |
Compatibility Table — What It Will Fit
The safest listing range for the complete assembly shown is 2013–2017. Later L405 vehicles may share the bare shell geometry, but their facelift trim and equipment must not be advertised as a direct plug-and-play match without VIN and option verification.
| Vehicle | Exact years | Body / side | Status | Compatibility notes |
|---|---|---|---|---|
|
Range Rover L405 full-size Vogue, Vogue SE, Autobiography and equivalent L405 trims |
2013 2014 2015 2016 2017 |
5-door; front right / OSF; UK RHD driver side | Correct era | Correct pre-facelift assembly era shown. Buyer must still match exterior/trim colour, connector layout, memory switch, speaker system, keyless entry, soft-close, lock, harness and module equipment. |
| Range Rover L405 full-size | 2018 2019 2020 2021 |
5-door; front right shell position | Shell only check | The LR036399 shell cross-reference extends through the later L405 range, but the 2018 facelift brought revised cabin/equipment. Treat this photographed assembly as non-direct unless a professional confirms transfer of the correct later trim, wiring, modules, lock and controls. |
| Range Rover L405 left-hand-drive market | 2013–2017 | Front right becomes passenger side | Configuration check | The shell side may correspond, but the UK driver switch pack, memory controls, harness and coding may differ. Not sold as a plug-and-play LHD assembly. |
| Standard or long wheelbase L405 | 2013–2017 | Front door position | VIN check | Catalogue shell data is shared broadly across L405 trims. Confirm the VIN, body specification and option codes before purchase; do not rely on trim name alone. |
Compatibility Table — What It Will Not Fit
| Vehicle / application | Status | Reason |
|---|---|---|
| Range Rover Sport L494, 2013–2022 | Will not fit | Different model, door shell, aperture, trim and electrical architecture. |
| Range Rover L322, 2002–2012 | Will not fit | Previous full-size generation with different body construction and mounting. |
| Range Rover L460, 2022-on UK generation | Will not fit | Later full-size generation; completely different body and electronics. |
| Range Rover Evoque L538 or L551 | Will not fit | Different compact model and door dimensions. |
| Range Rover Velar L560 | Will not fit | Different model and door architecture. |
| Discovery 4 L319 or Discovery 5 L462 | Will not fit | Different body shell and mounting points. |
| Defender L663 | Will not fit | Different model and construction. |
| Any left-front, rear-left or rear-right door position | Will not fit | This item is front right only. |
No other Land Rover model line has been confirmed. Similar appearance is not evidence of interchangeability.
Exactly What Is Included
Visible and included as photographed
- Front-right outer door shell/skin and frame
- Interior door trim panel shown
- Exterior handle shown
- Window/mirror switch pack shown
- Meridian-labelled speaker grilles and the loose small wired speaker/tweeter shown
- Visible lower moulding, weather trim and seals shown
Not fitted or must be verified
- Window glass is not fitted.
- Exterior door mirror is not fitted.
- Hinges, latch/lock, regulator, motor, speakers, wiring loom, modules, keyless equipment and soft-close equipment must be confirmed from the photographs or through eBay Messages.
- No unshown bolts, clips, fixings, coding, paintwork or labour are included.
Best matching method: send your registration or VIN through eBay Messages together with clear photographs of your existing door trim, switch pack and connector layout. Fitment support reduces wrong orders, but the buyer and installer must make the final physical/electrical comparison before fitting.
Condition, Colour & Cosmetic Notes
- This is a previously fitted donor assembly and will show storage/workshop dust, marks, scratches, scuffs and age-related wear.
- The outer colour appears light metallic bronze/silver in the photographs. Lighting and screens alter colour, and the exact paint code has not been verified.
- Assume refinishing or paint blending may be required for a professional colour match.
- The interior appears to combine a light upper section, dark lower section and wood-style trim. The exact trim code has not been verified.
- Inspect the photographs for the exterior-handle mark, lower moulding condition, heavy door-card soiling/wear and the loose small wired speaker/tweeter.
- Do not book paint, fitting or dismantling work until the item has arrived and your installer has inspected it.
Where the Door Is Fitted & What It Does
The assembly mounts to the front-right A-pillar/door aperture through the vehicle’s hinge system and is restrained by the door check. It forms the driver-side access opening on a UK right-hand-drive L405 and provides the mounting structure for the window system, lock/latch, exterior and interior handles, weather seals, mirror, switch pack, speakers and option-dependent modules.
The door also contributes to body sealing, wind-noise control, water management and side-structure integrity. Correct hinge alignment, latch engagement, seal compression and electrical configuration are therefore essential after installation.
Symptoms That May Lead to Door Replacement
| Symptom | Possible cause | Important check before buying |
|---|---|---|
| Door will not align, closes heavily or has uneven panel gaps | Distorted shell, hinge damage, previous impact or incorrect adjustment | Measure the aperture and inspect hinges/A-pillar. A replacement door will not correct structural aperture damage. |
| Wind noise or water ingress | Damaged shell flange, seals, glass alignment or latch adjustment | Identify whether the fault is the shell, seal, glass frame or adjustment. |
| Locking, keyless entry or soft-close fault | Latch, handle sensor, harness, module, coding or power-latch problem | Confirm the replacement assembly has the same equipment; diagnosis and coding may still be needed. |
| Window does not operate or sits out of line | Regulator, motor, glass, wiring, module or calibration issue | This item has no glass fitted. Confirm regulator/motor presence and match before purchase. |
| Mirror, speaker, memory or switch functions are intermittent | Switch pack, harness, connector, module, speaker or vehicle network fault | Match connector pin count, option codes and control layout. A door shell alone does not cure an electrical fault. |
| Creases, dents, corrosion or repair damage | Impact, poor previous repair or aluminium-surface damage | Compare repair cost with replacement, paint and transfer labour. |
Why Choose an Original-Manufacturer Donor Assembly?
Fit and integration benefits
- Original contours, seal channels and mounting provisions are designed for the L405 body aperture.
- Factory trim clips, handle openings, glass channels and option-dependent mounting points are more likely to align correctly than a low-cost pattern panel.
- Using a matching donor assembly can reduce fabrication, adjustment and component-transfer work.
- The L405 uses an aluminium-intensive body architecture, so correct materials and repair practice matter.
Value and sustainability
- A carefully matched donor component may offer substantial savings compared with purchasing every equivalent component new.
- Potential savings can be as much as 70% in some cases; actual saving depends on dealer price, condition, paint and fitting costs.
- Reusing serviceable components reduces demand for new raw materials, manufacturing energy and disposal.
- Correct matching first time helps reduce unnecessary transport and returns.
Fitting Instructions — Professional Outline
Safety note: a full door assembly is heavy and affects alignment, weather sealing and vehicle security. Two-person handling and a professional body repairer are strongly recommended. Use current JLR workshop information for model-specific safety steps and all torque values.
- Verify before dismantling. Compare VIN/model year, right-front shell shape, trim, connectors, switch layout, speaker system, keyless/soft-close equipment, lock type and memory-seat controls.
- Prepare the vehicle. Park level, protect the wing/A-pillar/sill, allow vehicle systems to shut down, isolate the 12-volt battery using the correct vehicle procedure and retain coding/security information where required.
- Support the original door. Use a padded door stand or lifting aid. Mark hinge positions and panel gaps before loosening anything.
- Disconnect systems. Release the door harness connector and door check/limiter using the approved access method. Do not pull the harness or allow the door to hang from wiring.
- Remove the door with two people. Support the weight, remove hinge fasteners in a controlled sequence and protect aluminium mating surfaces from contamination or impact.
- Transfer required components. Move the correct glass, mirror, regulator, lock, harness, modules, seals, trims and option equipment where required. Replace damaged clips and seals.
- Install and align. Position the replacement, loosely fit fasteners, set even gaps and flushness, align latch engagement and tighten only to the current workshop specification.
- Reconnect, configure and test. Restore the battery, initialise the window, check central locking, keyless/soft-close functions, speakers, switches, memory controls and mirror functions, then scan and clear relevant faults if necessary.
- Final quality checks. Confirm smooth opening/closing, seal contact, no wind/water leak, correct drain paths, no harness trapping and secure trim. Carry out a controlled road and water test.
Required Tools & Workshop Equipment
Hand toolsMetric socket/spanner set, ratchet and extensions
Trim toolsNon-marring trim tools and suitable clip tools
Drive profilesAppropriate Torx/hex tools after physical inspection
Torque controlCalibrated torque wrench and current workshop data
Door supportPadded door stand/lifting aid and two competent people
ProtectionWing covers, masking tape, edge protection and gloves
ElectricalMultimeter, diagnostic scan tool and battery support as required
AlignmentGap gauges, marker and suitable alignment wedges
Aluminium repairClean, material-appropriate tools and corrosion-control products
FinishingWater-leak test equipment and paint/bodyshop materials where required
Estimated Repair Time & Static Garage Cost Calculator
Estimated labour: approximately 2.5–4.0 hours for a straightforward door swap and alignment when the assembly is an exact equipment match. Allow a further 1.5–3.0 hours or more when transferring glass, mirror, regulator, lock, harness, modules, seals and trim. Paint preparation, curing, diagnostics and rectification are separate.
| Garage hourly rate | 2.5-hour estimate | 4.0-hour estimate | Calculation |
|---|---|---|---|
| £50 per hour | £125 | £200 | Hourly rate × labour hours |
| £75 per hour | £187.50 | £300 | Hourly rate × labour hours |
| £100 per hour | £250 | £400 | Hourly rate × labour hours |
Illustrative labour only, not a quotation or official book time. Ask the chosen garage to inspect the vehicle and supplied assembly before committing to cost.
ThePartPilot fitting service: fitting and repair work may be available subject to workshop capacity, vehicle condition and part suitability. Ask through eBay Messages before purchase; no fitting slot is reserved by buying the part alone.
Fitment Checklist — Buy the Correct Part First Time
- Vehicle is the full-size Range Rover L405, not Range Rover Sport, Evoque, Velar, L322 or L460.
- Vehicle is a 5-door body.
- Required position is front right / OSF.
- For a complete pre-facelift match, vehicle year is 2013, 2014, 2015, 2016 or 2017.
- Existing door-card shape, switch pack, memory buttons, speaker grilles and trim layout match the photographs.
- Keyless entry, soft-close/power latch, lock, harness, module and connector specifications match.
- You understand that window glass and exterior mirror are not fitted.
- Exterior colour and interior trim codes have been checked; paintwork may be required.
- Your installer has confirmed the vehicle aperture/hinges are not structurally distorted.
- You have supplied the VIN/registration and comparison photos through eBay Messages where uncertain.
Postage, Global Shipping & Checkout Address
UK delivery
Free UK postage is currently displayed on this listing. Final service, postcode, oversized-item and location eligibility are shown at checkout.
This is a large, heavy body panel. Inspect packaging on arrival and photograph any visible transit issue before unpacking further.
Address warning
Check the delivery address in eBay checkout before paying. The paid-order address cannot simply be replaced from a message. An incorrect address may require cancellation and repurchase through eBay.
Do not request delivery to a different address after payment.
eBay Global Shipping Programme destinations
EU: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain and Sweden.
Non-EU: Antigua and Barbuda, Aruba, Australia, Bahamas, Bahrain, Bangladesh, Barbados, Belize, Bermuda, Bolivia, Brazil, Brunei Darussalam, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, French Guiana, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Iceland, Indonesia, Israel, Jamaica, Japan, Jersey, Jordan, Kuwait, Liechtenstein, Macau, Malaysia, Maldives, Martinique, Mexico, Monaco, Montserrat, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Qatar, Reunion, Saint Kitts and Nevis, Saint Lucia, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks & Caicos Island, UAE, Ukraine, Uruguay, USA and Vietnam.
International availability is controlled by eBay and is confirmed only at checkout. Destination, item dimensions/weight, programme eligibility and local restrictions can change; the country list does not guarantee that this oversized door will be accepted for every destination.
Returns, Warranty & Fitment Responsibility
- The current listing displays 30-day returns with seller-paid return postage and a 30-day seller warranty.
- All returns are handled through the eBay return process and remain subject to eBay rules and statutory consumer rights.
- The item must be returned in the condition received, with ThePartPilot security marks intact and all supplied components included.
- Please do not cut, drill, paint, dismantle, alter wiring or fit the item until compatibility and condition have been confirmed. Alteration can affect the available remedy where permitted by law and platform policy.
- Use the photographs, compatibility tables and pre-purchase fitment service to reduce ordering errors. Item specifics alone are not a substitute for physical comparison.
Price Promise & Matching Standard
Found a comparable eBay listing before purchase? Send the eBay item number through eBay Messages. A fair comparison must match the exact side, L405 generation, years, condition, included components, colour/trim, warranty and delivered price. A bare shell, damaged panel or assembly without the same trim/equipment is not an equivalent comparison.
Workshop, Stock & Secure Dispatch
Repair & fitting supportProfessional fitting may be available subject to workshop capacity and vehicle inspection. Arrange through eBay Messages.
25,000+ parts in stockLarge on-shelf inventory helps us compare donor specifications and supply additional matching components where listed on eBay.
Careful dispatch processParts are identified, security-marked, protected and packed for the selected delivery route, with tracking where provided.
Support a Local Small Business & Reuse Quality Parts
Choosing ThePartPilot supports an independent UK automotive recycling business and keeps serviceable components in use. ♻️ Reuse can reduce demand for new raw materials, manufacturing energy and avoidable waste. 🌍 Accurate fitment information also helps reduce unnecessary return journeys. Thank you for supporting a local team that identifies, stores, packs and dispatches thousands of vehicle parts. 🤝
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.