Range Rover Sport L494 2013-2017 Indicator Wiper Stalk Switch DPLA-13N064-KA
Range Rover Sport L494 2013-2017 Indicator Wiper Stalk Switch DPLA-13N064-KA
INDICATOR & WIPER COMBINATION STALK SWITCH
PHOTO-VERIFIED LABEL: DPLA-13N064-KA
|
FRONT / REAR WIPER & WASH CONTROLS
|
INDICATOR / AUTO-LIGHT / FRONT & REAR FOG CONTROLS
|
|
RANGE ROVER SPORT L494 • FIVE-DOOR SUV
|
FITTED AROUND THE STEERING COLUMN BEHIND THE STEERING WHEEL
|
| Vehicle Make | Land Rover / Range Rover |
| Confirmed Model | Range Rover Sport, second generation |
| Chassis / Mark | L494 / MK2 |
| Confirmed Year Range | 2013–2017 pre-facelift applications, subject to exact matching |
| Body Style | Five-door SUV / 4x4 |
| Part Type | Steering-column combination switch / indicator and wiper stalk assembly |
| Manufacturer / Engineering Number | DPLA-13N064-KA |
| Alternative Number Format | DPLA13N064KA |
| Associated Reference | LR042312 has been associated with the same engineering number on catalogue/salvage references. Confirm by VIN before relying on this cross-reference. |
| Interchange Part Number | No additional direct interchange number conclusively verified for this exact complete assembly. |
| Superseded Part Number | No confirmed superseded number verified. |
| Placement | Interior front — steering column, directly behind the steering wheel |
| Controls Shown | Indicators, exterior lighting, automatic-light selection, front/rear fog lamps, front wipers, automatic/intermittent wiping, washers and rear wipe/wash |
| Colour / Marking | Black housing and stalks, white symbols, silver control rings and yellow identification dot on label |
| Construction | Moulded automotive plastic housing with electronic circuit board, switches, connector terminals and mechanical mounting points |
| Condition | Pre-owned recycled component. Cosmetic marks and symbol wear are visible. Inspect every photograph for the exact supplied condition. |
| Included | The photographed combination stalk housing only. Steering wheel, airbag, clockspring and additional trim are not included unless visibly attached in the main photographs. |
| Warranty | 30 days, subject to the listing terms and correct professional installation |
| VAT Information | Sold under the VAT margin / global accounting arrangements where applicable. VAT is not separately itemised and is not available to reclaim. |
| Vehicle | Years | Body | Fitment Status |
|---|---|---|---|
| Range Rover Sport L494 / MK2 | 2013–2017 | 5-door SUV | Confirmed application family. Exact number, connector, controls, equipment and steering position must match. |
| Range Rover L405 | Some early applications | 5-door SUV | Similar engineering housing reported, but this exact complete assembly is not advertised as a confirmed fit. VIN verification required. |
| Range Rover Evoque L538 | Some early applications | 3-door / 5-door | Do not assume compatibility. Evoque units may carry additional BJ32 numbers and different control specifications. |
The assembly is mounted around the steering column directly behind the steering wheel. It converts the driver's stalk movements and rotary-control selections into electrical commands for the vehicle's lighting, indicators, washers and wiper systems.
| • Indicators work intermittently or fail to latch correctly. |
| • Headlamp, automatic-light or fog-lamp selections do not respond correctly. |
| • Front wipers operate at the wrong speed or stop responding. |
| • Automatic/intermittent wiping or washer functions become unreliable. |
| • Rear wiper or rear washer control becomes intermittent. |
| • Functions operate only when the stalk is held, moved or lightly pressed. |
| • Relevant body-control or steering-column fault codes may be stored. |
A factory-specification switch is designed around the vehicle's connector arrangement, stalk movement, mounting geometry, control symbols and electronic communication requirements. A low-cost copy may look similar while differing internally, which can cause poor switch feel, premature wear, warning messages or incorrect function.
Choosing a quality recycled original-manufacturer component can provide significant savings compared with purchasing a new replacement while also keeping an existing serviceable part in use. Always compare the exact engineering number rather than relying on appearance alone.
| 1 | Park with the road wheels and steering wheel centred. Record any vehicle settings that may be lost. |
| 2 | Disconnect the battery using the approved procedure and observe the specified restraint-system waiting period. |
| 3 | Remove the driver's airbag strictly in accordance with the manufacturer workshop instructions. Store it safely with the trim face upward. |
| 4 | Mark the steering-wheel position, disconnect the approved connectors and remove the wheel without rotating the clockspring. |
| 5 | Remove the upper and lower steering-column shrouds and release the original switch housing. |
| 6 | Compare both assemblies side by side, connect the replacement and reinstall all components using the correct manufacturer torque specifications. |
| 7 | Reconnect the battery, scan for faults and complete steering-angle or related calibration if required by the vehicle. |
| 8 | Test every indicator, lighting, fog-lamp, front/rear wiper and washer function before road use. |
| Garage Rate | 1.0 Hour | 1.5 Hours | 2.0 Hours |
|---|---|---|---|
| £60 per hour | £60 | £90 | £120 |
| £80 per hour | £80 | £120 | £160 |
| £100 per hour | £100 | £150 | £200 |
| £120 per hour | £120 | £180 | £240 |
| £150 per hour | £150 | £225 | £300 |
UK and international delivery options are displayed by eBay during checkout. Eligible international orders may be processed through eBay's Global Shipping Programme, with customs and destination availability managed by eBay.
Destination availability, import taxes, customs charges and delivery services vary by country and are shown by eBay where applicable.
This listing provides the visible part number, photographs, control specification, compatibility guidance and non-fitment information to help buyers order correctly. Buyers remain responsible for confirming that the component matches their vehicle before installation.
Returns must be opened and processed through eBay. Any refund deduction may only be applied where permitted by eBay and where an item is returned in a materially different condition, damaged, altered, dismantled or with a demonstrable loss in value.
| 🔎 PART NUMBER CHECKED |
📦 SECURELY PACKAGED |
🚚 TRACKED WHERE PROVIDED |
Buying a quality recycled vehicle component supports a growing local business, helps extend the useful life of existing parts and reduces the demand for additional manufacturing, packaging and raw materials.
♻ Reuse more • Waste less • Keep vehicles on the road
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.