These are public, externally hosted reference images. For a live eBay listing, keep only images you have permission to use and that load reliably in your account region.
Built for an eBay Motors listing with a luxury look, large readable text, clear fitment guidance, and a strong focus on first-time-correct ordering. The wording below avoids claims that cannot be verified from the item photos or part number alone.
These are public, externally hosted reference images. For a live eBay listing, keep only images you have permission to use and that load reliably in your account region.
| Status | Fitment | Notes |
|---|---|---|
| Confirmed by public listings | Renault Clio II / Mk2 facelift (Phase II), 1.2 petrol | Public listings tie this hose to Clio Mk2 facelift applications and to OE references 7700109917 / 7700109918 / 7700111824. One listing states 2001-2007 and 1.2 petrol; another references a 2003 Clio intake hose. citeturn266296search1turn118326search0turn118326search2 |
| Use with VIN check | Other Renault models | I have not verified any additional vehicles from the sources checked, so do not claim broader fitment unless you have the donor part, VIN, or EPC confirmation. |
| Do not guess | Any vehicle outside the confirmed match above | Fitment should be confirmed by part number, engine code, and VIN before purchase. |
Location: fitted in the intake path between the airbox and engine inlet.
What it controls: clean, measured air delivery into the engine so the ECU can maintain the correct air-to-fuel ratio. Public parts listings note that failures can lead to vacuum leaks, rough idle, and reduced performance. citeturn118326search0turn266296search7
Typical fault symptoms: split or cracked hose, whistling air leak, rough idling, hesitation, loss of power, increased fuel use, engine warning light, or poor throttle response.
| Step | Guidance |
|---|---|
| 1 | Inspect the old hose for cracks, splits, loose clamps, or collapsed sections. |
| 2 | Compare the old part number and shape with the replacement before removal. |
| 3 | Release the airbox clips or clamps, then remove the damaged hose carefully. |
| 4 | Fit the replacement hose, seat both ends fully, and tighten all clamps evenly. |
| 5 | Start the engine and check for air leaks, warning lights, or unstable idle. |
Tools required: flat screwdriver, socket set, clamp pliers, flashlight, and a trim tool where clips are tight.
Estimated repair time: 20 to 45 minutes for an experienced technician, depending on access and corrosion.
| Rate | 0.5h | 1h | 1.5h | 2h |
|---|---|---|---|---|
| £60/hr | £30 | £60 | £90 | £120 |
| £80/hr | £40 | £80 | £120 | £160 |
| £100/hr | £50 | £100 | £150 | £200 |
Because active content is blocked on eBay, this is a static estimate table rather than a live calculator.
Always verify by: part number, VIN, engine code, and photos.
Do not rely on image alone. Use the photo as a visual cross-check only.
Returns policy note: if a return is made because fitment was not checked against the part number and photos, your stated restocking terms can be displayed here.
Use this number for WhatsApp contact and fitment questions.
ThePartPilot keeps more than 25,000 parts in stock at any one time, helping buyers find the right item first time. Include your own verified warehouse and workshop photos here if you want a stronger trust signal on eBay.
Fitting service subject to availability. If you offer repairs, add a separate line for workshop bookings and keep it clearly optional.
Checkout reminder: customers must make sure their checkout address is correct before paying, because address changes are often not possible once the order is placed.
Global Shipping Programme: if enabled on the listing, show that the item is sent through eBay's GSP and that international tracking and customs handling are managed through checkout. citeturn700635view0
Why buy an original Renault part: factory-spec fit, correct durability, and a better chance of solving the fault first time compared with a cheap copy. Keep this wording generic and avoid unsupported claims like lifetime guarantees.
Recycling note: choosing used parts reduces waste, supports small businesses, and keeps serviceable components in circulation.
Repair garage note: you can add your own workshop photos, dispatch-area photos, and boxed-stock images in this section if you have permission to use them.
Renault Clio II Mk2 facelift 1.2 petrol air intake hose pipe. Used original Renault part, part number 7CO 1019 592, with public cross-references to 7700109917 / 7700109918 / 7700111824. Please compare the part number and photos carefully before ordering. This hose sits in the intake tract and helps maintain correct air flow into the engine. If it is split or damaged, the car may suffer from rough idle, air leaks, hesitation, reduced performance, or warning lights. Public listings associate this hose with Renault Clio Mk2 facelift / Phase II applications and 1.2 petrol engines, including a Clio Mk2 facelift listing stated as 2001-2007, and a 2003 Clio intake hose reference. citeturn266296search1turn118326search0turn118326search2
We recommend checking against the part number, the vehicle VIN, and the photo before ordering so you receive the correct part first time and avoid unnecessary returns.
To keep this safe for eBay, use your own licensed warehouse or dispatch photos here rather than copyrighted stock images. For a premium layout, place a 3-column image row below this note: boxed stock, pallet shelving, and dispatch desk.
Buying a reusable part helps reduce waste, saves money, and supports local independent sellers. That means fewer parts ending up as scrap and more usable components staying in circulation. In plain terms: better value for the buyer, less waste for the planet, and support for a small business that knows its stock. 🌍🔧♻️