SEAT Leon FR Mk2 1P 2006-2012 RHD 5 Door Driver Footrest Trim Panel
SEAT Leon FR Mk2 1P 2006-2012 RHD 5 Door Driver Footrest Trim Panel
SEAT Leon FR Mk2 1P 2006-2012 RHD 5 Door Driver Footrest Trim Panel
Confirmed SEAT Leon FR model data
| Make | SEAT |
| Model | Leon FR Mk2 / Leon II FR |
| Chassis code | 1P / 1P1 |
| FR model years | 2006-2012 |
| Body style | Five-door hatchback |
| Steering position | Right-hand drive only for this photographed footrest orientation |
| Photographed donor | SEAT Leon FR, 2007 |
| Fitment rule | Confirm the full moulded part number, shape, mounting clips, fixing recess, colour and tread pattern against the original part. |
Actual item photographs
The photographs below show the exact pre-owned trim supplied. Please inspect every image for cosmetic condition, mounting shape and included fittings.
SEAT Leon FR vehicle data and fitting location
Where does it fit?
This trim is installed in the front driver footwell. In a right-hand-drive Leon it forms the raised support for the driver's left foot and closes/protects the adjoining carpeted footwell area.
LEFT-FOOT REST CLUTCH BRAKE ACCEL.
What it controls: it is a non-electrical interior trim and does not control an electronic or mechanical system. Its job is to support the driver's resting foot, provide a durable contact surface and finish/protect the footwell.
Item details and engineering references
| Part type | Driver footrest / dead-pedal support / lower footwell trim panel |
| Vehicle side | Driver side on a right-hand-drive vehicle; located left of the pedals inside the driver's footwell |
| Main vehicle | SEAT Leon FR Mk2, chassis 1P / 1P1, five-door hatchback |
| Trim level | FR - photographed donor marking confirms SEAT Leon FR 2007 |
| FR model years | 2006-2012 model range. Match the complete part number, RHD orientation, shape, rear clips and colour before purchase. |
| Donor evidence | Reverse is marked “LEON FR 2007” in the listing photographs |
| Reference part number | 1K2 864 777 B / 1K2864777B - strong visual and catalogue cross-reference. The moulded number is not readable in the supplied listing photos, so the complete number must be physically checked before relying on it. |
| Interchange part number | 1K2864777B; catalogue colour suffixes may include 9B9 or 82V. Match the complete suffix, colour and tread finish where present. |
| Superseded part number | No confirmed superseded number verified for this photographed item |
| Material | Moulded automotive-grade plastic with a textured anti-slip foot-contact surface |
| Colour marking | Black / dark anthracite body with grey dotted tread surface; compare your original under natural light |
| Condition | Pre-owned vehicle part. Age-related marks, dust, scuffs and signs of prior installation may be present. Supplied exactly as pictured. |
| Included | The footrest trim shown in the actual item photographs only. Separate screws, nuts, caps, brackets or surrounding trim are not included unless visibly attached in the photographs. |
| eBay item number | 147479020731 |
| VAT information | Sold under the VAT Global Accounting / second-hand margin scheme. VAT is not separately itemised and no reclaimable VAT invoice is available. |
SEAT Leon FR compatibility
| Make | Model / chassis | Years | Body / steering | Fitment status |
|---|---|---|---|---|
| SEAT | Leon FR Mk2 / Leon II FR, 1P / 1P1 | 2006-2009 | Five-door hatchback, RHD, pre-facelift | Strongest application. The photographed donor marking confirms a 2007 Leon FR. Match the complete number, front shape, rear clips, fixing recess, colour and tread finish. |
| SEAT | Leon FR Mk2 / Leon II FR, 1P / 1P1 | 2009-2012 | Five-door hatchback, RHD, facelift | Part-number match required. Use only when the complete moulded number, orientation, mounting points, colour and tread finish match the original part. |
This Leon FR interior trim is selected mainly by chassis 1P/1P1, right-hand-drive orientation, moulding, mounting layout and colour code rather than engine size. Registration-year compatibility tools can be incomplete around the 2009 facelift changeover.
Additional vehicle cross-reference
| Make | Model / chassis | Catalogue years | Body notes | Buyer check |
|---|---|---|---|---|
| SKODA | Octavia II, 1Z | 2004-2013 | Saloon / estate, RHD | Full 1K2864777B number and colour suffix must match |
| VOLKSWAGEN | Golf Mk5 / Mk6, 1K / 5K | 2004-2013 | Hatchback, RHD | Compare exact moulding and all rear mounting points |
| VOLKSWAGEN | Golf Estate, 1K / AJ | 2007-2014 | Estate, RHD | Confirm full number and trim colour |
| VOLKSWAGEN | Golf Cabriolet, 51 / 5K | 2012-2016 | Convertible, RHD | Confirm complete number and suffix |
| VOLKSWAGEN | Eos, 1F | 2006-2008 and 2011-2016 | Convertible, RHD | Catalogue source does not confirm 2009-2010; do not assume |
| VOLKSWAGEN | Jetta, 1K | 2006-2010; USA catalogue to 2011 | Saloon, RHD application only | Confirm market, steering position and full number |
| VOLKSWAGEN | Scirocco, 13 | 2009-2018 | Coupe, RHD | Colour variants exist; match complete suffix and surface |
This part will not fit
- Left-hand-drive vehicles. LHD parts use a different orientation and commonly a different 1K1-prefixed base number.
- SEAT Leon FR Mk1 / 1M, Leon FR Mk3 / 5F, Leon FR Mk4 / KL or any vehicle outside the Mk2 1P / 1P1 generation.
- A passenger-side panel, accelerator/brake/clutch pedal cover, carpet section or pedal mounting bracket.
- Vehicles where the rear bracket, clips, fastener recess, outer profile, tread pattern or complete colour suffix differs from the photographs.
- Vehicles with a broken or missing body-side mounting bracket unless that bracket is repaired or replaced separately.
- Any car selected only because the year or engine appears in an automated compatibility checker.
Five-point buyer matching checklist
RHD only
Confirm the steering wheel is on the right and the part sits in the driver's left-foot resting area.
Match the face
Compare the long tapered dotted tread, raised side wall and circular fixing recess.
Match the reverse
Check every clip, rib, bracket engagement point and cut-out against the actual photos.
Match the number
Look for 1K2864777B or the same complete moulded number on your original. Match suffixes where shown.
Ask before buying
Send your registration, VIN and a clear photo of your old part through eBay Messages for a fitment sense-check.
Best practice
Photo plus complete part number plus VIN gives the strongest check. No single method should be used alone.
Symptoms of a worn or faulty footrest trim
- Cracked, split or missing plastic around the fixing recess.
- Broken rear clips causing the panel to move, click or rattle.
- A raised edge, loose corner or poor seating beside the pedal area.
- Heavily worn or polished tread that no longer gives a confident resting surface.
- Exposed carpet, insulation or an unfinished appearance in the driver footwell.
- Incorrect replacement trim that leaves gaps or does not engage the original bracket.
Why choose a factory-original pre-owned component?
Designed for the original footwell
The correct factory moulding follows the vehicle's carpet, bracket, kick-panel and pedal-area geometry. This helps retain the intended fit, pedal clearance, surface texture and interior appearance.
Better value than a cheap copy
A low-cost universal or poorly moulded copy may have inaccurate clips, hard edges, mismatched texture or a loose fit. A matching pre-owned factory part can cost substantially less than buying new, with savings of up to 70% possible depending on the part and market price.
Reuse keeps parts in service
Reusing a serviceable component reduces demand for new plastic production, packaging and manufacturing energy while helping another vehicle remain complete.
Order the correct part first time
Our image-led matching process, part-number cross-reference and compatibility chart are designed to reduce wrong orders, unnecessary transport and avoidable returns.
Fitting instructions
Required tools
- Plastic trim-removal wedge
- Small ratchet and socket set and/or Torx driver set, depending on retained fasteners
- Low-range torque wrench capable of approximately 2 Nm
- Inspection torch
- Protective gloves and a clean cloth
Estimated repair time
30-45 minutes for a straightforward like-for-like replacement. Allow up to 60 minutes where surrounding sill/kick trim must be loosened, clips are damaged or the mounting bracket needs attention.
- Park safely, apply the handbrake, switch the ignition off, remove the key and move the driver's seat fully rearward.
- Remove the floor mat and photograph the original installation so the clip and trim order is recorded.
- Use a plastic wedge to release any overlapping sill or kick-panel trim. Avoid metal screwdrivers against visible plastic.
- Remove the retained cap/bolt or nut fasteners, then carefully disengage the original footrest from its bracket and clips.
- Place old and replacement parts side by side. Confirm all profiles, rear clips, holes, ribs, colour and moulded numbers match.
- Clean the mounting area and check the body-side bracket is complete, straight and secure.
- Engage the replacement fully into the bracket first, then align the remaining clips and fixing points. Do not bend or force cold plastic.
- Refit the original fasteners. Related RHD Volkswagen Group workshop data quotes 2 Nm for the footrest bolt and the three retaining nuts; apply this only where the same fastener arrangement is present and do not overtighten.
- Refit surrounding trim and the floor mat. Press the footrest firmly by hand to confirm it does not rock, lift or move.
- Check full clutch, brake and accelerator movement before driving. The replacement must not obstruct any pedal.
Garage labour cost estimator - no JavaScript
Use the formula hourly labour rate x booked hours = estimated labour charge. The figures below are labour-only illustrations and exclude VAT treatment, diagnostic time, broken clips, extra parts, travel, consumables or minimum workshop charges.
| Garage rate | 0.5 hour | 0.75 hour | 1.0 hour |
|---|---|---|---|
| GBP 50/hour | GBP 25.00 | GBP 37.50 | GBP 50.00 |
| GBP 60/hour | GBP 30.00 | GBP 45.00 | GBP 60.00 |
| GBP 80/hour | GBP 40.00 | GBP 60.00 | GBP 80.00 |
| GBP 100/hour | GBP 50.00 | GBP 75.00 | GBP 100.00 |
| GBP 120/hour | GBP 60.00 | GBP 90.00 | GBP 120.00 |
| GBP 150/hour | GBP 75.00 | GBP 112.50 | GBP 150.00 |
Stock, workshop and dispatch
Delivery, checkout address and international shipping
- No free-postage promise is made in this description. The postage service, charge and estimated delivery time shown by eBay at checkout form part of the order.
- Check your eBay checkout address before payment. We cannot manually redirect an order to a different address after purchase. Where possible, request cancellation and repurchase using the correct saved address.
- International delivery may be available through eBay's Global Shipping Programme for eligible items and destinations. eBay calculates the international shipping, import VAT and duties shown to the buyer at checkout.
- Availability can depend on item category, size, value, destination restrictions and the buyer's address. The checkout result is the final live availability check.
Current eBay UK GSP destination guide
Returns and order accuracy
Support a local small business and the circular economy
Every correctly reused vehicle part supports a UK small business, helps keep skilled automotive work in the local economy and gives a serviceable component another useful life.
Reuse
Extending a part's service life reduces unnecessary disposal and demand for newly manufactured replacement plastic.
Fewer avoidable journeys
Better fitment information helps reduce wrong orders, return transport and repeat packaging.
Small-business service
Your order supports the people who identify, store, photograph, pack and dispatch thousands of individual vehicle components.
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.