SEAT Leon MK2 1P 2005-2012 Rear Right OSR Power Window Switch Trim 1P0867228A
SEAT Leon MK2 1P 2005-2012 Rear Right OSR Power Window Switch Trim 1P0867228A
SEAT Leon MK2 1P 2005-2012 Rear Right OSR Power Window Switch Trim
Part number 1P0 867 228 A / 1P0867228A • Secondary moulded reference 156.023.181
Important Fitment Summary
This is the rear-right door switch/handle trim assembly for the SEAT Leon Mk2, platform code 1P/1P1, 5-door hatchback, model generation 2005-2012, equipped with an electric rear window. On a UK right-hand-drive car this position is commonly called OSR.
Confirmed complete-assembly application
SEAT Leon Mk2 1P / 1P1 2005-2012 5-Door Hatchback Rear Right / OSR Electric Rear WindowMust match before purchase
- Moulded number 1P0 867 228 A
- Long trim shape and all retaining clips
- Rear-right position and electric-window configuration
- Electrical connector, switch button and black finish
- Your original part against every actual-item photograph below
Actual Item — The Part You Will Receive
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
THEPARTPILOT
Correct Vehicle Reference
Where this part is fitted
It clips into the rear-right interior door pull/armrest area and houses the local electric-window switch used by the rear passenger.
OSR — FITS HERE
Side names can differ by country. Use rear right as the universal position; OSR is the common UK term.
Part Specification
Compatibility Table — What It Fits
| Make / Model | Generation & Body | Model Years | Position | Essential Conditions | Status |
|---|---|---|---|---|---|
| SEAT Leon | Mk2, 1P / 1P1, 5-door hatchback | 2005-2012 | Rear right / OSR | Electric rear windows; original trim marked 1P0867228A; matching connector, switch, clips, shape and colour | CONFIRMED APPLICATION |
| SEAT Leon FR / Cupra / Cupra R trim level | Mk2, 1P / 1P1, 5-door hatchback | Within 2005-2012 generation | Rear right / OSR | Trim badge alone does not confirm fitment. Buy only when the original number, connector, shape and finish match. | CONDITIONAL ON EXACT MATCH |
What It Will Not Fit
| Vehicle / Configuration | Reason | Status |
|---|---|---|
| SEAT Leon Mk1 / 1M | Different generation, door trim and mounting design | WILL NOT FIT |
| SEAT Leon Mk3 / 5F, including SC and ST | Different generation and switch/trim assembly | WILL NOT FIT |
| SEAT Leon Mk4 / KL | Different generation and electronics/interior design | WILL NOT FIT |
| Front right, front left or rear left doors | This assembly is handed and shaped specifically for the rear-right door | WILL NOT FIT |
| Cars with manual rear windows | Requires the electric-window switch configuration | WILL NOT FIT |
| SEAT Altea, Toledo, Ibiza; Audi A3; VW Golf; Skoda Octavia | No complete-panel cross-fitment is confirmed. Similar-looking loose switches do not prove the long trim assembly fits. | NOT CONFIRMED — DO NOT ORDER AS A CROSS-FIT |
| Any car with a different part number, connector, clips, shape or trim finish | Visual and part-number mismatch | WILL NOT FIT |
What This Part Does
Electrical function
The switch sends the passenger's local raise/lower request to the vehicle's electric-window system for the rear-right door. The driver's master switch and window-lock function may override local operation.
Mechanical and trim function
The moulded panel supports the switch, forms part of the rear-door pull/armrest trim and keeps the control securely aligned. Correct clip geometry helps prevent looseness, rattles and an uneven interior finish.
Common Symptoms and Checks
Possible symptoms of a faulty switch/trim
- Rear-right window does not respond from the rear-door switch
- Intermittent up/down operation when the button is moved
- Button feels loose, sticky, cracked or physically damaged
- Switch is loose because the surrounding trim or clips are broken
- Illumination fault at the local switch, where equipped
- Cracked, lifted or heavily worn door-pull trim
Diagnose before ordering
- Check the driver's window-lock/child-safety control is not disabling the rear switch
- Check the relevant fuse, wiring, connector and door-jamb loom
- If the window fails from both local and master switches, the regulator, motor or wiring may be the fault
- Confirm the glass/regulator moves freely and is not mechanically jammed
- Compare your original assembly directly with every photograph and number shown here
Why Choose a Used Original-Specification Part?
Factory shape and mounting geometry
An original used panel is made to the vehicle's established clip positions, contours and switch aperture. That can reduce the risk of poor alignment, flexing, rattles or visible gaps associated with a low-quality copy.
Connector and switch integration
Matching the original part number and connector helps preserve the intended electrical interface and button feel. Always compare the supplied item with your removed part before installation.
Value and sustainability
A serviceable used component can offer substantial savings compared with buying a new replacement while extending the useful life of an existing part. Savings vary by availability and current new-part pricing.
Fitting Guide
Tools normally required
General installation sequence
- Confirm the replacement's number, shape, connector, switch button, colour and clip layout against the removed/original part before beginning.
- Park safely, switch off the ignition, remove the key and disconnect the battery negative terminal. Follow the vehicle handbook for battery precautions.
- Protect the surrounding door trim. Use a plastic lever to release the rear-right interior switch/handle trim carefully, supporting the long moulding so it does not bend or snap.
- Lift the trim only far enough to reach the electrical connector. Depress the locking tab; do not pull on the wires.
- Inspect the connector and wiring for heat damage, corrosion, bent terminals or broken insulation. Repair wiring faults before fitting a replacement switch.
- Connect the replacement assembly. Reconnect the battery temporarily and test the local switch and driver's master control before fully seating the trim.
- Switch off again as required, align every retaining clip with its aperture and press evenly until the panel sits flush without forcing it.
- Complete a final function test. If one-touch operation is lost after battery disconnection, follow the vehicle handbook's window-reset/adaptation procedure.
Estimated fitting time: approximately 20-45 minutes for an experienced fitter when no wiring or door-trim damage is present. This is a guide, not a fixed book time.
Static Garage Labour Cost Estimator — No JavaScript
Because eBay does not allow active-content calculators, use the table below. It assumes an estimated 0.5 to 0.75 labour hour.
| Garage Rate | 0.5 Hour | 0.75 Hour | Estimated Labour Range |
|---|---|---|---|
| £40/hour | £20.00 | £30.00 | £20.00-£30.00 |
| £50/hour | £25.00 | £37.50 | £25.00-£37.50 |
| £60/hour | £30.00 | £45.00 | £30.00-£45.00 |
| £70/hour | £35.00 | £52.50 | £35.00-£52.50 |
| £80/hour | £40.00 | £60.00 | £40.00-£60.00 |
| £90/hour | £45.00 | £67.50 | £45.00-£67.50 |
| £100/hour | £50.00 | £75.00 | £50.00-£75.00 |
| £120/hour | £60.00 | £90.00 | £60.00-£90.00 |
Illustrative labour only. Diagnostic time, a garage minimum charge, wiring repair, extra clips, consumables and any applicable taxes are not included. ThePartPilot fitting and repair services are subject to availability; arrange through eBay Messages.
How to find us / WhatsApp
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Scan the QR code to open a WhatsApp chat for collections and enquiries.
If the QR image needs refreshing, generate it again from the same WhatsApp link.
Delivery, Collection and Address Information
For collection arrangements, fitment questions or fitting-service availability, please use eBay Messages. International destination availability, delivery cost, taxes and import charges are calculated by eBay at checkout.
Returns and Correct-Part Checks
Before installation
- Confirm 1P0867228A / 1P0 867 228 A on your original part
- Confirm rear-right position and electric rear-window specification
- Compare connector, switch, clips, contour, length, texture and colour
- Ask through eBay Messages before purchase when any detail differs
Return condition
Returns are handled through eBay and must follow the stated return policy. The exact supplied item, with all included components, must be returned securely packaged and in the same condition.
Where eBay rules permit, a refund deduction may be applied only for the actual loss in value when a returned item has been installed, altered, damaged, incompletely returned or inadequately packaged, up to the limit allowed by eBay. This is not an automatic restocking fee. Statutory rights remain unaffected.
ThePartPilot Service Promise
Support a Local Small Business and Reuse Quality Parts
🚗♻️ Choosing a serviceable used component helps keep an existing vehicle on the road, extends the useful life of a manufactured part and reduces avoidable waste. Every purchase supports a local small business, skilled parts handling and the continued reuse of valuable automotive components.
📦🔧 Orders are picked from stocked inventory, visually matched to the listing and prepared for dispatch with protection around vulnerable switches, connectors and trim edges.