SUZUKI ALTO 2009-2014 RIGHT REAR DOOR CARD PANEL TRIM OSR
SUZUKI ALTO 2009-2014 RIGHT REAR DOOR CARD PANEL TRIM OSR
A used grey/dark-grey interior right rear door card / door panel trim for the European/UK five-door Suzuki Alto body shape. This panel forms the finished interior surface of the right-rear passenger door and incorporates the moulded door-pull area, storage pocket and speaker-grille area visible in the photographs.
This listing has been written around physical panel shape, door position and catalogue/reference numbers rather than relying only on generic marketplace vehicle data. This is intended to help buyers identify the correct part first time and reduce avoidable returns.
| Make | Suzuki |
| Model | Alto – UK/European five-door body shape |
| Exact model years | 2009, 2010, 2011, 2012, 2013, 2014 |
| Body style | 5-door hatchback |
| Parts-catalogue family | AMF310 / European A-Star-shape family |
| Part type | Rear interior door card / door panel / trim panel |
| Placement | Right Rear / RH Rear / OSR in UK terminology |
| Reference / moulded number | 83731-68KA / 8373168KA – compare with your existing panel |
| Interchange Part Number | 83731-68KA / 8373168KA used as the matching trim reference; physical comparison required |
| Superseded Part Number | No confirmed superseded number verified |
| Colour | Grey / dark-grey interior trim – catalogue colour P4Z; compare photographs |
| Material | Moulded automotive interior plastic/polymer construction; exact resin grade not independently confirmed |
| Condition | Used – inspect all actual photographs for cosmetic marks, wear and supplied components |
| Donor vehicle | 2012 Suzuki Alto – listing donor mileage 15,436 miles |
| eBay Item Number | 147493783043 |
| Vehicle / Variant | Years | Status | Important Check |
|---|---|---|---|
| Suzuki Alto UK/European 5-door | 2009–2014 | ✓ CONFIRMED APPLICATION | RH rear door + matching grey panel shape + reference number |
| Suzuki Alto first registered in 2015 | 2015 registration | ⚠ VERIFY FIRST | Registration year alone is not enough. Must be the earlier European 5-door body and matching part. |
| Nissan Pixo UA0 | 2009–2013 generation | ⚠ NOT ADVERTISED AS CONFIRMED | Nissan's catalogue uses a different RH rear finisher service number. Do not order for a Pixo without an item-to-item physical/reference-number match. |
| Earlier Suzuki Alto generations | Pre-2009 UK/European shape | ✕ DOES NOT FIT | Different body/door architecture |
| Suzuki Celerio UK model | 2015-on | ✕ DOES NOT FIT | Different replacement model/body |
| Left rear / nearside rear door | All | ✕ WRONG SIDE | Left-rear catalogue trim is a different part |
| Front door panels | All | ✕ DOES NOT FIT | This is specifically a rear-door card |
| 3-door vehicle | Any | ✕ DOES NOT FIT | This part is for the five-door body |
Both images below show the correct European five-door Alto body family. Use them to reject the wrong generation/body shape before ordering.
The panel clips to the inside face of the right-rear passenger door. It hides the inner metal door structure and fixings and creates the finished passenger-compartment surface.
The door card is primarily an interior trim and protection component. It covers the internal door structure and provides a finished surface around the interior handle area, door-pull/armrest area, storage pocket and speaker-grille location.
- Cracked, split or heavily scratched interior panel
- Broken or distorted mounting/clip areas causing the panel to sit loose
- Rattling or vibration from an insecure panel
- Damaged speaker-grille area
- Damaged door-pull or storage-pocket area
- Warped trim that no longer sits flush against the metal door shell
- Poor cosmetic appearance after previous repair or interior damage
A correctly matched manufacturer-designed panel is shaped around the vehicle's existing door shell, handle opening, clip positions, speaker-grille position and interior contours. This can make fitting and visual matching much easier than using a lower-cost pattern replacement whose colour, grain, clip geometry or moulding quality may vary.
Buying a serviceable used part can also represent a substantial saving against purchasing an equivalent new component. Depending on the part and current new-part pricing, used vehicle parts can sometimes save up to 70%; actual savings vary and buyers should compare like-for-like prices.
- Plastic interior trim-removal tool set
- Cross-head / Phillips screwdriver
- Small plastic pick or suitable trim tool
- Torch or inspection light
- Clean cloth / protective tape
- Replacement door-card clips if any originals are brittle or damaged
- Park safely and remove the key. Protect the sill, paintwork and surrounding interior trim.
- Compare the replacement before removal. Match the outline, handle opening, speaker grille, pocket and mounting areas.
- Remove any trim caps/covers and the visible retaining screws from the existing door card.
- Starting along a lower edge, use a plastic trim tool to release the perimeter clips one at a time. Do not violently pull the complete panel away.
- Support the panel and lift/release it from the upper window-line edge as required.
- Disconnect any cable or electrical connector that is actually fitted before moving the panel away from the door. Never pull on wiring.
- Transfer reusable clips or ancillary trim pieces if required and replace any damaged clips.
- Offer the replacement panel to the door, locate the upper edge first where applicable, align every clip and press evenly into position.
- Refit screws, covers and any components removed during access.
- Before finishing, check the interior release, locking, window operation if disturbed, speaker operation if applicable and normal door closing.
A straightforward door-card replacement is typically a relatively short trim job. Allow approximately 30–60 minutes where fixings release normally and no additional broken clips, wiring faults or door repairs are required.
Static calculation below replaces an interactive JavaScript calculator so the description remains eBay-safe. Formula: hourly labour rate × 0.5 to 1.0 hour.
| Garage Rate | Approx. 0.5 Hour | Approx. 1.0 Hour |
|---|---|---|
| £50/hour | £25 | £50 |
| £60/hour | £30 | £60 |
| £75/hour | £37.50 | £75 |
| £90/hour | £45 | £90 |
| £100/hour | £50 | £100 |
| £120/hour | £60 | £120 |
| £150/hour | £75 | £150 |
✓ You require the RIGHT REAR interior door card
✓ The shape of your existing panel matches the actual photographs
✓ The handle aperture, speaker-grille position, pocket and panel outline match
✓ Your existing reference/moulded number matches where available
✓ Your colour/finish is compatible with the grey/dark-grey panel shown
✓ You understand that a 2015 registration requires additional verification rather than assuming fitment by year
Postage services, charges, delivery estimates and international availability are those shown by eBay for this listing at checkout. International delivery is available only where eBay and the selected delivery service make this item/category eligible.
We provide extensive fitment information, actual item photographs, part-number guidance and a compatibility chart to help customers order correctly. Please use all of this information before purchase.
Returns remain subject to the return terms displayed by eBay on the listing and all applicable statutory consumer rights. If you are uncertain about compatibility, please ask us through eBay Messages before fitting the part.
This used item is sold under the HMRC Global Accounting / second-hand margin scheme where applicable. VAT is not separately itemised and no reclaimable VAT amount is shown.
ThePartPilot carries more than 25,000 vehicle parts on the shelf at any one time, helping us offer customers a broad choice of replacement components and fast access to stock.
Every serviceable used vehicle component that can be responsibly reused keeps useful material in circulation rather than disposing of a part that still has practical life remaining. Reuse can also reduce the need to manufacture and transport an additional replacement component.
By purchasing from ThePartPilot you are supporting an independent local automotive parts business while helping give a usable component another working life. Thank you for choosing reuse. 🌍💚🔧
WhatsApp QR for Fitment Help / Appointment Enquiries
Scan the QR code to contact ThePartPilot on WhatsApp for fitment checks, appointments or fitting service availability.For faster fitment help, send your vehicle registration, VIN if available, and clear photos of your existing part, connector and part number.